ArbNation Join free

AHCARB319 Use arborist climbing techniques: what the unit covers and what it replaced

AHCARB319 is the Australian national unit for climbing trees with ropes, harnesses and spurs. Release 1 came with training package version 5.0 and maps to AHCARB307 as equivalent.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

AHCARB319 and its related documents are described here as the national training package publishes them. It is not training and does not teach the work.

What the unit is

Skills Insight publishes AHCARB319 Use arborist climbing techniques on training.gov.au, Release 1, generated February 11, 2025. The unit describes the skills and knowledge to climb trees with ropes, harnesses and specialist equipment, using climbing techniques for mobility in the canopy to reach a safe work position. It applies to people who work in arboriculture under broad direction and take responsibility for their own work.

The prerequisite is nil. No licensing, legislative or certification requirements apply to the unit at the time of publication. Climbing work is to follow preferred industry practices as outlined in the Companion Volume.

Elements and performance criteria

The unit has four elements.

AHCARB319 elements
ElementPerformance criteria cover
1. Prepare site and inspect equipmentSite access and scope, a site-specific job safety analysis, first aid and rescue personnel, pre-operational checks on ropes, harnesses and tools, and personal protective equipment (five criteria).
2. Prepare to access treeInspecting the tree for an access route, selecting and preparing climbing equipment, configuring a climbing system, climbing knots and hitches, climbing spurs and gaffs for dismantling work, and pre-climb checks (six criteria).
3. Access and work position within treeAnchor points chosen for load and access, low-risk anchors installed with throw lines and tested, ascent, work positioning for pruning and dismantling, communication with the team, clearance from hazards and awareness of power lines (nine criteria).
4. Descend from treeA controlled descent, removing climbing equipment, and inspecting, cleaning, maintaining and storing it (three criteria).

Performance evidence in the assessment requirements

The separate assessment requirements document sets the evidence. It asks for a climb of a tree at least 18 metres tall with a canopy spread of at least 10 metres, without spurs, reaching at least five different outer extremities. It asks for a second climb to 15 metres with spurs in a tree to be removed, with at least five metres of clear trunk below the lowest branch.

The spur climb includes ascending and descending the trunk without setting a line at the top, transitioning around obstacles, performing a self-arrest and branch walking. A throw line must go into a target no larger than 600 mm across and at least 20 metres up, within 15 minutes.

The evidence list names both rope systems. It covers a stationary rope technique (SRT) canopy anchor and basal anchor, a moving rope technique (MRT) anchor point with a cambium saver, and the use of MRT with trunk-walking, foot ascenders or footlocking. It also covers a second point of attachment, multiple lines and natural and artificial redirects.

The knot list

The assessment requirements list 19 knots and hitches to be tied, dressed, set and finished. They are the scaffold knot, double fisherman's bend or prusik loop, girth hitch, prusik hitch, Blake's hitch, marlinspike hitch, clove hitch, double-overhand stopper knot, sheet bend and slippery sheet bend. The list goes on with the bowline with a tie-off or stopper, the running bowline, bowline on a bight, alpine butterfly, klemheist, figure-8 loop, munter hitch, Flemish bend and Zeppelin bend. One advanced hitch is also listed, chosen from Distel hitch, Valdotain tresse, Schwabisch hitch and Knut.

The knowledge evidence adds forces on anchor points and redirects, power line safe approach distances, and the limits, advantages and disadvantages of friction hitches.

What it replaced

The unit mapping table in AHCARB319 names AHCARB307 Undertake advanced tree climbing as the previous version. Its equivalence status is Equivalent. The table's comments read: title changed, prerequisite units removed, elements and performance criteria clarified, foundation skills added, assessment requirements updated.

A second row maps AHCARB311 Tie, dress, set and finish arborist knots to the new unit with the status Not equivalent. Some of the content is covered in the redesigned unit. AHCARB312 does not appear in the mapping table.

The knot unit AHCARB311

AHCARB311 is Release 1, training package version 1.0, generated August 1, 2022. It applies to ground-based workers doing defined activities with low-risk work procedures. Its elements are assisting in preparation of the work site, tying, dressing and setting arborist knots, inspecting and using the knot, and completing knot operations.

The performance criteria include a tail of approximately five times the diameter of the rope and setting the knot to tighten and load it before use. Its range of conditions lists knots that must be known for ground-based rigging, above-ground work and aerial rigging, such as the klemheist, the running bowline and the timber hitch.

Where the unit sits in the Certificate III

AHC30824 Certificate III in Arboriculture, Release 1, generated May 2, 2024, needs 18 units: 9 core and 9 elective. There are no entry requirements. AHCARB319 is an elective in Group A (Climbing Specialist) with AHCARB317 Dismantle trees and AHCARB318 Undertake aerial rescue, and also appears in Group B (Crane Specialist). All three Group A electives give the award title Certificate III in Arboriculture (Climbing Arborist). AHCARB318 lists AHCARB319 as a prerequisite, along with HLTAID011 Provide First Aid.

For other countries' climbing syllabi, see the guides on certifications by country and rescue courses by country.

Sources