ANSI A300 in one volume (2023): what changed from the ten separate parts
The Tree Care Industry Association folded the ten separately published parts of ANSI A300 into one 2023 volume. The Parts became Clauses, and the numbers changed.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The Tree Care Industry Association (TCIA) is the secretariat of ANSI A300.
Ten parts, then one volume
TCI Magazine's 30th anniversary article on ANSI A300 dates the first part, "ANSI A300 Part 1, Pruning", to 1995. Nine more standards followed over the next 15 years. In 2023 all ten were combined into a single volume.
The November 2023 issue of Tree Care Industry introduced the result as the "ANSI A300 2023 Tree Care Standards". Its authors redesigned, restructured and consolidated the ten parts into one document. The parts had been written and revised over 28 years on separate review cycles. A user of the old set had to track parts that were out of step with one another.
TCIA's A300 page puts the consolidated document on sale from January 1, 2024, in print and digital form. The digital form carries videos, animation, interactive assessments and an online A300 Pruning Standards course.
Parts become Clauses
A TCI Magazine article on mechanical pruning explains the change in naming. Until the 2023 volume, the standards were ten "Parts", each published separately. The former Parts are called "Clauses", and the numbers have changed. The article refers to "Clause 5, Pruning" in the 2023 revision.
| Old part | Subject | Published |
|---|---|---|
| Part 1 | Pruning | 1995 |
| Parts 2 to 4 | Fertilization, cabling and bracing, lightning protection (with Part 1, the first four parts by 2002) | By 2002 |
| Part 5 | Management during site planning, site development and construction | 2005 |
| Part 6 | Transplanting | 2005 |
| Part 7 | Integrated vegetation management | 2006 |
| Part 8 | Root management | 2013 |
| Part 9 | Tree risk assessment | 2011 |
| Part 10 | Plant health care | 2012 |
Old citations and new numbers
TCI Magazine pairs one old part with one new clause: Part 1, Pruning, is Clause 5, Pruning. Clause 9 is Management During Site Development.
What the standard is for
TCIA's A300 page calls the standards practices and specification-writing guidelines for arborists, urban foresters, horticulturists, landscape architects and contractors. They are used to develop written specifications for work assignments, not as specifications in themselves. Intended users include businesses, government agencies, property owners, property managers and utilities. The standards do not apply to agriculture, horticultural production or silviculture, except where noted.
The consolidated edition adds maintenance and monitoring recommendations that move maintenance responsibility toward tree owners, clearer palm pruning rules for frond removal, and updates on indiscriminate mechanized tree cutting. All the standards share one review cycle of five years. The anniversary article says the committee is working toward a full revision by 2028.
Who writes it
The Accredited Standards Committee on Tree, Shrub, and Other Woody Plant Management Operations - Standard Practices, A300 (ASC A300), writes and revises the standard. TCIA was accredited as a standards developing organization with ASC A300 as the consensus body on June 28, 1991. ANSI requires that approved standards be reviewed, and revised if necessary, every five years.
The anniversary article says the A300 standards are not written to be law. It adds that courts turn to industry standards to decide liability when problems arise, and that standards can serve as the basis for statutes and codes.
Sources
- Tree Care Industry Association, ANSI A300 Tree Care Standards page, read October 15, 2026
- Bowman, Hill, Rouse and Bushnell, Introducing the Newly Designed ANSI A300 Tree Care Standards, Tree Care Industry, November 2023, read October 15, 2026
- Geoff Kempter, Let's Recognize the 30th Anniversary of ANSI A300, TCI Magazine, November 11, 2025, read October 15, 2026
- TCI Magazine, ANSI A300 Clause 5 Expands Use of Mechanical Pruning, read October 15, 2026