ArbNation Join free

Arboricultural Association Safety Guide 5, Use of MEWPs in Tree Work: what it covers

Safety Guide 5 is a seven-page Arboricultural Association checklist, dated December 2020, for tree work from a MEWP. It runs from planning to operator proficiency and sits beside HSE's MEWP page and the industry code.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

The named codes and training bodies are described here as published. It is not training and does not teach the work.

The leaflet

The Arboricultural Association (AA) lists Safety Guide 5 last in its series of five. It is derived from Technical Guide 5, and the AA compiled the series from the safety checklists that open each technical section of the Technical Guides.

The leaflet calls its notes good practice that is not compulsory. It is not a substitute for adequate training or for the full Technical Guide. The leaflet states that the key principles of the Industry Code of Practice (ICoP) for tree work at height must be adopted when it is used. Anyone using a MEWP for tree work can use it to check operators against industry guidance.

Guide 5 assumes the decision to use a MEWP has already been made. It sends readers to the ICoP and to Technical Guide 5 for that decision. The AA series page was posted on 15 December 2020 and last modified on 26 November 2021.

Checklist sections

Every section is a list of questions with Yes, No and N/A columns, followed by a notes page for an observer's findings and actions.

AA Safety Guide 5 checklist sections and the questions in each
SectionQuestionsWhat the questions ask about
2 Planning and management17Whether a MEWP is the safest method, operator numbers and competence, rescue plan, method statement, thorough examination, permissions
3 MEWP selection6Height and outreach, working envelope, travel across site, drop zone, transport position, outriggers, room to turn
4 MEWP set-up5Weather, weight and ground-based supports, ground bearing, underground services, above-ground utilities
5 MEWP use for tree work4Maximum platform load and hand-held branch removal, drop zones, barriers, ropes and timber fouling the machine
6 MEWPs and highways5Permission for the public highway, traffic management, road load limits, weight distribution
7 Electrical utility work for the network operator6Authorisation and permits, knowing where operators are, dead and live conditions, earthing equipment
8 Emergency tree work6Owner's permission, adverse weather, partly windblown trees, light, utilities, excluding third parties
9 Waterways4Life jackets, a rescue plan for water, effect on the watercourse, permission
10 Emergency rescue from a platform3Rescue plan, competent operators on hand, dedicated rescue equipment
11 Aerial rescue of a climber using a MEWP4Rescue plan, whether the MEWP is a safe and efficient way to reach the climber, people and equipment on hand
12 Inspection regimes4Thorough examination record, pre-delivery and on-delivery inspections for hired machines, weekly and daily checks
13 Operator proficiency4Training in MEWP operation, tree work techniques, PPE use and inspection, rescue

The industry code on MEWPs

Section 2.8.3 of the ICoP, in the edition of February 2015, calls MEWPs versatile work equipment that can serve as an access solution and as a place to carry out operations. As collective protection, a MEWP can protect more than one person and, once properly installed or erected, needs no action from the operator to work. The code calls that passive.

Its planning list for a proficient arborist, with the MEWP competent person where appropriate, runs from the task and the choice of machine to safe working load, working height and outreach. It also covers site access and egress, proximity hazards such as overhead and underground services, ground suitability and gradient, personal fall protection for those in the platform, and communication with the ground. Weather and wind limits, the safety of those not involved and emergency contingencies complete the list.

HSE on MEWPs in tree work

HSE's MEWP page says MEWPs often give safe, quick access to trees and a secure working platform. They can still topple if overloaded or poorly maintained. The Work at Height Regulations 2005 do not require a MEWP for all tree work, but HSE says one should always be considered when work is planned.

HSE names three settings where MEWPs are particularly suited: tree work in urban areas, diseased or dying trees where climbing is difficult or arduous, and jobs with a reasonable number of trees. When work equipment is chosen for work at height, the Regulations put collective protection ahead of personal fall protection such as a rope and harness. HSE's page points to the AA guide to MEWPs in arboriculture and to HSE's guide GEIS6.

HSE's page on arboriculture repeats the preference. It says MEWPs are used in preference to rope access where ground conditions allow and where reasonably practicable. A listed check is that MEWPs and cranes are set up so the counterweight does not swing into the way of pedestrians or road traffic. Under lifting rules, a MEWP needs thorough examination by a competent person.

Where the leaflet points next

Guide 5 ends with a reading list of Technical Guides 1 to 5, FISA 802 on emergency planning and FISA 805 on training and certification. Related reading: the guide to Arboricultural Association Safety Guides 1 to 5, the guide to bucket trucks and EWPs and the guide to HSE lift plan guidance.

Sources