Australia: the White Card and high risk work licences for EWPs and cranes
A white card is the construction induction card, void after two years away from construction work. High risk work licences cover cranes, boom-type platforms, dogging and rigging, last five years and carry a class code.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The sources are the SafeWork NSW pages on white cards and on high risk work licences, and the WorkSafe Victoria page on high risk work licences.
The white card
SafeWork NSW calls the white card the general construction induction card, and says it is required for workers who carry out construction work. The people it lists are site managers, supervisors, surveyors, labourers and tradespeople, people who enter operational construction zones without supervision from an inducted person, and workers whose employment routinely takes them into those zones.
- The card becomes void if the holder has not carried out construction work for two consecutive years or more.
- Construction workers can work in NSW using induction cards issued by other states and territories.
- Training is with a registered training organisation. The trainer takes 100 points of identification, and the course fee is set by the organisation.
- A person must be at least 14 to take part in the training.
- The organisation sends the application. Its completion statement stays valid for 60 days, and most cards are issued in under 30 days.
High risk work licences
SafeWork NSW says a licence is needed to do high risk work that is residential, commercial or industrial, whatever the cost or size. High risk work includes operating specified machinery, erecting scaffolding, and dogging or rigging. A person is not required to hold a licence while training for one under the supervision of a licence holder.
The two regulators print different class totals. WorkSafe Victoria lists 30 classes under the Occupational Health and Safety Regulations 2017. SafeWork NSW counts 29 classes and 12 crane classes plus one reach stacker class.
| Licence | Code | Scope as the regulators print it |
|---|---|---|
| Vehicle loading crane | CV | Capacity of 10 metre tonnes or more, mounted on a vehicle to move a load onto or off it. NSW includes load estimation and slinging |
| Non-slewing mobile crane | CN | Over 3 tonnes capacity, boom or jib that cannot slew. NSW includes articulated type cranes |
| Slewing mobile crane, up to 20 tonnes | C2 | Includes CN and CV |
| Slewing mobile crane, up to 60 tonnes | C6 | Includes C2, CN and CV |
| Slewing mobile crane, up to 100 tonnes | C1 | Includes C6, C2, CN and CV |
| Slewing mobile crane, over 100 tonnes | C0 | Includes C1, C6, C2, CN and CV |
| Boom-type elevating work platform | WP | Boom length of 11 metres or more (NSW) |
| Dogging | DG | Slinging a load, or directing a crane operator when the load is out of view |
| Basic, intermediate and advanced rigging | RB, RI, RA | Dogging comes first. Intermediate adds cranes and dual lifts |
SafeWork NSW adds that a CV licence holder can operate a vehicle loading crane without holding a slewing licence, when the equipment suits the task, stays within its operating parameters and the operator is adequately trained. A telehandler with forks or a bucket needs no high risk work licence in NSW. A slewing telehandler with a hoist rope or hook block needs a C class licence, and one with a personnel box of 11 metres or more needs a WP licence.
WorkSafe Victoria states that an excavator or a scissor lift needs no high risk work licence.
Applying, term and renewal
Both states require training with a registered training organisation and an assessment before the application. In NSW the applicant must be at least 18 and able to speak English well enough to work safely with others. NSW and Victoria both give the licence five years. Added classes expire with the licence in NSW.
The application deadline after assessment is 60 days in NSW and 60 calendar days in Victoria. WorkSafe Victoria says processing may take up to 45 calendar days and prints an application fee of AU$77.70 per class and a renewal fee of AU$58.70.
An expired licence can be renewed within 12 months in both states. In NSW a person who renews before expiry may keep working until the renewal confirmation arrives. Past 12 months, NSW requires new training, reassessment and a new application, and Victoria asks for proof of exceptional circumstances. Victoria states that older competency certificates have expired, and holders must apply for a new licence.
State crane rules are in the Victoria crane guide and the New South Wales crane guide.