ArbNation Join free

Australian chainsaw and felling units on training.gov.au: what the national training register lists

The national training register lists five chainsaw units in the Forest and Wood Products Training Package: basic, intermediate and advanced manual felling, trimming felled trees, and cutting materials. None carries a licensing requirement.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page draws on the training.gov.au register PDFs for the Forest and Wood Products Training Package, Version 6.0. It is not training and does not teach the work. Arboriculture qualifications are covered in the guide to the Certificate III in Arboriculture.

The five units

FWPCOT2253 Fell trees manually (basic)

  • Sector: Common Technical. Prerequisite: none. Release 1, document generated December 16, 2022.
  • Scope: assessing and felling basic trees manually with a chainsaw and routine operator maintenance. Trees typical to the unit's scope may have no excessive lean, no visible damage or defect and a single stem or non-complex multi-stems.
  • Elements: five, from preparing for felling to maintaining the chainsaw and cutting attachments.
  • Previous version: FWPCOT2236, mapped as equivalent.

FWPFGM3216 Fell trees manually (intermediate)

  • Sector: Forest Growing and Management. Prerequisite: none. Release 1, document generated January 25, 2023.
  • Scope: trees with a complexity that calls for significant assessment and practical felling skills. The unit states that a person competent in it should be able to fell most trees except advanced trees and those with significant defects.
  • Elements: five. Previous version FWPFGM3212, equivalent, with a new element added.

FWPFGM3217 Fell trees manually (advanced)

  • Sector: Forest Growing and Management. Prerequisite: none. Release 1, document generated May 6, 2021.
  • Scope: trees of any size, species and condition, including significant defects, that are deemed safe to fell. Listed characteristics include heavy forward lean, hung-up trees, hollow butts and fire-damaged butts.
  • Elements: five. Previous version FWPFGM3213, equivalent, with a new element added.

FWPCOT2256 Trim and cut felled trees

  • Sector: Common Technical. Prerequisite: none. Release 1, document generated May 6, 2021.
  • Scope: trimming and cutting felled trees with a chainsaw, plus operator maintenance.
  • Elements: five, from preparing for trimming through assessing felled trees and planning the cutting to completing equipment tasks. Previous version FWPCOT2239, equivalent.

FWPCOT2259 Cut materials with a hand-held chainsaw

  • Sector: Common Technical. Prerequisite: none. Release 1, document generated September 27, 2024.
  • Scope: preparing and cutting timber and polymer materials with a hand-held chainsaw in sawmills, timber yards, horticulture, construction and manufacturing settings.
  • Elements: three: prepare for operation, cut material and perform routine operator maintenance. Previous version FWPCOT2238, equivalent.

Where the units apply

The four felling and trimming units apply to people who work in arboriculture, forestry, agriculture, conservation and land management, local government, emergency services and other government agency operations. With the exception of minor forest produce, they do not apply to commercial harvesting operations. The materials unit names no tree work and applies to mills, yards and plants.

The four felling and trimming units state that work follows workplace procedures and state and territory health and safety regulations. Each of the five states that no licensing, legislative or certification requirements apply at the time of publication.

Sources