ArbNation Join free

Australian tree risk qualifications: MIS501, MIS306 and the AQF unit AHCARB601

Three documents name tree inspection and tree risk in Australia: the industry standards MIS306 and MIS501, and the national unit AHCARB601 Examine and assess trees.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

The MIS series

The Minimum Industry Standards are peer-reviewed books produced by Arboriculture Australia Ltd and the New Zealand Arboricultural Association with the wider tree care community. Arboriculture Australia calls them industry standards that give uniform terminology and practice across both countries. Unit AHCARB601 sits in the AHC training package, a separate document.

Two series matter for tree risk. Series 3, for practising arborists, is referenced in AHC30820 Certificate III in Arboriculture and holds 17 titles. Series 5, for consulting arborists, is referenced in AHC50520 Diploma of Arboriculture and is still in development, with 2 of 7 titles available.

MIS titles that touch tree risk
TitleSeriesReferenced in
MIS306 Tree Inspection for Access and WorkSeries 3, practising arboristsAHC30820 Certificate III in Arboriculture
MIS501 Tree Risk AssessmentSeries 5, consulting arboristsAHC50520 Diploma of Arboriculture
MIS506 Tree ValuationSeries 5, consulting arboristsAHC50520 Diploma of Arboriculture

Students enrolled in the Certificate III or the Diploma get free electronic access to the MIS for the length of enrolment. They arrange it through their registered training organisation.

MIS501 contents

The New Zealand Arboricultural Association says MIS501 covers the core standards of tree risk assessment for arborists in Australia and New Zealand. It states that the standard is not a tree risk assessment system. It is a framework in which different systems may be applied.

Its contents run in four parts.

  • Introduction to tree risk assessment: what risk is, risk terminology, probability and likelihood, and risk thresholds.
  • Risk assessment methodologies: quantitative, qualitative and comparative.
  • Components of tree risk assessment: target, tree failure and impact, including the target zone, target occupancy and cognitive biases that affect likelihood.
  • Professional requirements: limits of assessment, Level 1 limited visual, Level 2 visual and Level 3 advanced assessment, advice on risk controls, residual risk, reinspection, and competency.

The AQF unit AHCARB601

AHCARB601 Examine and assess trees is a unit of competency from the AHC training package, written by Skills Impact for the Commonwealth. Release 2 was generated on March 30, 2021. The unit covers examining and assessing tree health, age, taxonomy, risk, amenity value and significance, and compiling a tree assessment report.

Three units are listed as prerequisites: AHCARB403 Perform a ground-based tree defect evaluation, AHCARB302 Inspect trees for access and work, and AHCARB313 Identify trees.

The unit has ten elements. Element 9, Carry out risk assessment, has seven performance criteria. They start with visual tree assessment and basic diagnostic tools, go on to the level of risk compared with published levels of risk from non-arboricultural activities, and end with documenting risk controls and monitoring.

The unit text adds that licensing or certification requirements apply in some states and territories and may differ by jurisdiction. It also notes that local tree protection laws and Australian Standards may apply to the work.

Sources