ArbNation Join free

Automation and remote-controlled machines in tree work and forestry: what safety bodies say

HSE covers machine-assisted takedown, BS EN 17067 covers radio remote controls on forestry machines, and an Australian report and a Canadian trucking project cover remote control and autonomy. None covers remote-controlled or autonomous machines in tree care.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The named standard, regulator and research bodies are described here as published. It is not training and does not teach the work.

Definitions in the Australian report

Forest and Wood Products Australia (FWPA) published Next Generation Timber Harvesting Systems: Opportunities for remote controlled and autonomous machinery in January 2018, written by Associate Professor Rien Visser of the University of Canterbury, New Zealand. Its summary and glossary separate the terms.

  • Remote control is control of a machine from a distance by radio or infrared signals, with the operator usually in clear line of sight.
  • Teleoperation is the technical term for operating a machine from a distance. It often implies live video and audio feedback from the machine.
  • Autonomous systems perform certain functions without direct control by a human operator.

Most modern forestry machines can readily be converted to remote control at relatively low cost, the report finds. Operation is usually slower, and much slower for complex tasks.

Where the Australian report sees a case for remote operation

The report names three cases: where operator safety might be compromised, where a full-time operator would be underused, and where sites are hard to reach or qualified operators are hard to find. It gives the example of a machine that is unsafe with a person in the cab.

On felling, the report calls a fully autonomous felling machine the most popular image of robotic harvesting. The software, safety and social aspects are still in their infancy, and the near-term opportunity is to expand remote controlled or teleoperated felling machines. An early remote controlled harvester had much lower productivity and was never a commercial success.

European skidders with a remote feature are usually used only to reposition the machine while the operator is out of the cab, for example when pulling out winch rope. The report finds no information that running such a machine only by remote is a commercially viable alternative to the cab.

Wireless radio remotes already control some cable yarders. The report describes a yarder in which two phases are automated and the operators hold complete control by radio remote. The computer can stop the carriage movement in 1/100th when tension monitoring detects a stuck turn, the report gives no unit. A human operator is likely to take up to 2 seconds.

Nearly every autonomous system the report describes will also need remote operation for the moments when the software is unsure, such as an object it cannot identify. The report calls the arrangement semi-autonomous or continuous assistance.

BS EN 17067 on radio remote controls

The BSI catalogue lists BS EN 17067:2018, Forestry machinery. Safety requirements on radio remote controls, published January 31, 2019. The entry shows it as current and designated, and as identical to EN 17067:2018.

BSI says the standard sets common and machine-specific requirements for cableless control systems on forestry machinery. The listed machines are cable winches, self-propelled machinery, mobile yarders, log splitters and combined firewood splitters, chipping machines and forestry boom loaders.

The standard deals with hazards of the cableless control system, in intended use and under foreseeable misuse. It deals only with remote operation of the machine. Protective measures for the work the machine does are left to machine-specific standards. It does not apply to cableless control systems on machinery made before its publication date.

HSE on machine-assisted takedown

The HSE tree work page on machine-assisted takedown records many incidents where operators used machines to help take down large edge trees and hung-up or leaning trees. All operators must receive appropriate training in four things: operating the machine, doing the tasks required, using personal protective equipment, and keeping the machine in good working order. The HSE page does not mention remote or autonomous machines.

FPInnovations on autonomous trucking

FPInnovations describes an Autonomous Trucking Initiative for forestry and mining. Its target is SAE Level 4 autonomous driving on Class 8 trucks, in four-season weather, on the terrain found on Canadian resource roads. The work is framed around a driver shortage: 25,000 trucking vacancies, and a Trucking HR Canada prediction that the number may increase to 40,400 by 2030.

It describes two models: platooning, with one experienced driver leading a convoy of electronically linked driverless trucks, and single-vehicle autonomy. The challenges are forest road topography, mixed traffic and obstacles, extreme weather, many trailer configurations, public acceptance, regulatory hurdles, and existing standards and policies that do not support autonomous transport.

Test work is recorded in three steps. Highway and resource road testing in 2018 and 2019 covered more than 1500 km of platooning. Baseline testing in 2022 scanned about 2500 km of Quebec forest roads with a portable sensor kit. Phase 1 in 2023 put a manually driven leader truck ahead of a follower truck driving autonomously with a safety driver present, for more than 1400 km in autonomous mode.

Gaps in the sources

None of the four documents covers remote-controlled or autonomous machines in tree care. The HSE page is on tree work and does not mention them. The FWPA report and the FPInnovations page concern harvesting and haulage in forestry.

Sources