ArbNation Join free

Back pain and lifting logs: HSE manual handling guidance, the MAC tool, NIOSH and WorkSafeBC

HSE, NIOSH and WorkSafeBC name the load, posture and repetition factors behind lifting injuries. HSE's MAC tool and WorkSafeBC's calculator score a lift. The agencies write for workplaces in general, not for tree work.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. It is not medical advice. None of the three agencies writes for tree work, and none names logs or brush.

The legal duty in Great Britain

HSE's guide to manual handling at work defines manual handling as transporting or supporting a load by hand or bodily force. That covers lifting, putting down, pushing, pulling, carrying and moving. A load can be an object, a person or an animal. Employers must avoid hazardous manual handling so far as reasonably practicable. They must assess the risk of any handling that cannot be avoided, then reduce that risk as low as reasonably practicable.

The law sets no specific weight limit, though HSE calls the weight of a load important. In some cases the employer must pass on the weight of each load and the position of its centre of gravity, where there is a risk of injury and doing so is reasonably practicable.

HSE leaflet INDG143, Manual handling at work: a brief guide, is written for employers and explains their duties under the Manual Handling Operations Regulations 1992. The January 2020 revision (rev4) lines its risk assessment up with Appendix 1 of L23 so that low-risk tasks can be picked out. It carries simple filters for lifting and lowering, for carrying, for pushing and pulling, and for handling while seated. The older section on handling techniques moved to HSE's website.

The MAC tool

HSE's manual handling assessment charts, the MAC tool, score the risk from lifting, lowering, carrying and team handling. The scoring uses a number and a traffic light colour. The tool looks at three kinds of operation: lifting by one person, carrying by one person, and team handling.

Each kind has its own flow chart that steps through the risk factors, plus an assessment guide for scoring. A graph of load against frequency covers lifting and carrying. Team handling has no graph, because HSE calls those operations complicated and diverse. HSE adds that each factor should be assessed against the worst case. Its example is a pallet that is half full at the time of the assessment: the worker will reach the bottom layer later and be at greater risk then. The MAC tool sits alongside HSE's RAPP tool for pushing and pulling, and its ART tool for repetitive upper limb tasks.

Risk factors the agencies list

WorkSafeBC says lifting, handling or carrying objects can cause musculoskeletal injuries, among them sprains and strains. The risk goes up with bending, twisting, heavy loads and awkward postures. A load lifted far from the body puts more stress on the back than the same load lifted close in.

Load and task factors by agency
AgencyFactors named
WorkSafeBC, lifting and handlingWeight of the load. Distance of the load from the body. Size and shape of the load. Distance carried. Starting height and vertical distance lifted. Lifting combined with twisting. Time spent carrying. Number and frequency of lifts.
NIOSH, ergonomicsLifting, pushing, pulling or carrying many or irregularly shaped objects. Awkward or unnatural postures. Cold. Vibration from machinery and tools. Greater intensity, frequency or duration of activity. Psychosocial stress.
HSE, MAC toolKnown risk factors scored task by task. HSE's MAC pages also cover psychosocial risk factors and individual differences.

NIOSH adds personal factors such as age, sex and body mass index. It defines ergonomics as the design of work tasks to best suit the capabilities of workers, and its researchers recommend fitting the work environment to employees' physical capabilities and limits. NIOSH describes musculoskeletal disorders as disorders of the muscles, nerves, tendons, ligaments, joints, cartilage or spinal discs.

Calculators and control questions

WorkSafeBC offers a lift and lower calculator that estimates whether a lift carries a low, moderate or high risk of injury. A second calculator for pushing, pulling and carrying estimates a suggested maximum force and a weight that can be carried.

For choosing controls, WorkSafeBC poses questions. Among them are whether mechanical aids such as hoists, carts or conveyors can replace handling by hand, and whether the load can be lifted between knee and waist height. The others ask whether the lift distance or carry distance can be shortened, whether stooped or twisted positions can be avoided, and whether the load can be made smaller, with two trips in place of one heavy one. Under administrative controls it asks whether a carrying task can become a pushing or pulling task, whether workers can get time to rest, and whether tasks can be varied. WorkSafeBC lists training in proper lifting and handling techniques there too, as a way to limit musculoskeletal injuries. The employer must consult the joint health and safety committee or the worker health and safety representative when choosing controls.

Weight limits and back pain in the agency pages

NIOSH's ergonomics page does not name back pain or give a weight limit. HSE's guide states that the law sets no weight limit, and neither HSE nor WorkSafeBC gives one.

Sources