ArbNation Join free

Biodegradable bar and chain oil: EU Ecolabel, Blue Angel and EPA lubricant definitions

The EU Ecolabel and Germany's Blue Angel both set criteria for chainsaw oil. An EPA paper defines an environmentally acceptable lubricant by biodegradability, aquatic toxicity and bioaccumulation.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

Three documents set criteria or definitions for biodegradable lubricants. Two are label schemes, the EU Ecolabel and the German Blue Angel. The third is an EPA background paper written for vessel operators.

The EU Ecolabel decision

Commission Decision (EU) 2018/1702 of November 8, 2018 establishes the EU Ecolabel criteria for lubricants. Article 1 places chainsaw oils in the Total Loss Lubricants sub-group, next to wire rope lubricants, concrete release agents and total loss greases. Article 2 defines a chainsaw oil as a lubricant used to lubricate the bar and chain on one or more types of chainsaw. It defines "total loss" as a lubricant fully released to the environment during use.

Under Regulation (EC) No 66/2010 the label may be awarded to a product that meets the criteria in the Annex. The decision states that the criteria stay valid until December 31, 2024.

Annex criteria that apply to chainsaw oils (Total Loss Lubricants column)
CriterionWhat the Annex sets for chainsaw oils
2. Aquatic toxicity, whole productCritical concentration of more than 1,000 mg/l for acute toxicity, or more than 100 mg/l for chronic toxicity, for the freshly prepared lubricant. Each main component, meaning any substance above 5 % by weight, must show more than 100 mg/l acute or more than 10 mg/l chronic
2. Aquatic toxicity, by substanceSubstances at or above 0.10 % by weight are capped by toxicity band. A substance with acute toxicity above 10 and up to 100 mg/l may total at most 2 % of the product. Between 1 and 10 mg/l the cap is 0.4 %. At 1 mg/l or less the cap is 0.1 % divided by the M-factor
3. BiodegradabilitySubstances that are readily aerobically biodegradable must total more than 95 % of the product. Inherently biodegradable substances may total at most 5 %. Non-biodegradable and non-bioaccumulative substances may total at most 5 %. Non-biodegradable and bioaccumulative substances may total at most 0.1 %
4. Renewable ingredientsPalm oil or palm kernel oil ingredients must all meet a sustainable production scheme. A product that uses the term "bio-based" or "bio-lubricant" must have at least 25 % bio-based carbon under EN 16807
6. Minimum technical performanceThe KWF test version 2017, or an equivalent test

The Annex defines "readily biodegradable" for this purpose. In a 28-day study the substance reaches 70 % degradation in tests based on dissolved organic carbon, or 60 % of the theoretical maximum in tests based on oxygen depletion or carbon dioxide generation. That level must be reached within 10 days of the start of degradation, unless the substance is a complex multi-constituent material and the window is justified as waived. A substance is "inherently biodegradable" at more than 70 % after 28 days in an inherent test, or more than 20 % but under 60 % in the oxygen or carbon dioxide tests.

The Blue Angel

The Blue Angel runs the DE-UZ 178 scheme, "Biodegradable Lubricants and Hydraulic Fluids", in its 2022 edition. Its product categories include chain lubricants for motor saws, total loss lubricants, hydraulic fluids and greases. The scheme page gives the reason: loss lubrication during wood cutting releases about 10,000 tons of chain lubricants into the environment each year. Components that are toxic or poorly biodegradable can harm soil and water.

The scheme's stated purpose is to let users choose products that consist primarily of renewable raw materials, vegetable or animal oils, and that stand out for good biodegradability. It also requires plastic canisters to contain a minimum share of post-consumer recycled material. The numeric criteria sit in the scheme's Basic Award Criteria document.

The EPA definition

EPA paper 800-R-11-002, "Environmentally Acceptable Lubricants" (November 2011), was written for operators of vessels under the Vessel General Permit, where it is offered as a best management practice. It uses "environmentally acceptable lubricant" for a lubricant shown to meet standards for biodegradability, toxicity and bioaccumulation potential. It uses "environmentally friendly lubricant" or "biolubricant" for one expected to have good qualities but not yet shown to meet those standards.

The paper sets out the base oils behind that split.

Base oils in EPA 800-R-11-002, Table 7
Base oilWhat the table records
Mineral oilPersistent or inherently biodegradable. Bioaccumulation potential yes. Toxicity high
Polyalkylene glycolsReadily biodegradable. No bioaccumulation. Toxicity low, though solubility may raise the toxicity of some
Synthetic esterReadily biodegradable. No bioaccumulation. Toxicity low
Vegetable oilReadily biodegradable. No bioaccumulation. Toxicity low

Among the common test methods the paper lists OECD 301B (the modified Sturm test) and ASTM D-5864. Both measure ready biodegradability, defined as 60 % conversion to carbon dioxide within a 10-day window that starts when degradation begins and falls inside 28 days. Along with chain saw oil, more hydraulic fluids carry the Blue Angel and the European Eco-label than any other class of lubricant.

Where the documents differ

The EPA paper describes the Blue Angel as having no renewability requirement, so that a lubricant made wholly from petroleum components can be certified. The Blue Angel scheme page for the 2022 edition describes an aim of products made primarily of renewable raw materials. The EU decision sets a renewable test only for palm-based ingredients and for the words "bio-based" and "bio-lubricant".

Sources