Biodiversity net gain and trees in England: habitat condition, tree units and irreplaceable habitats
Planning permissions for development in England are deemed to carry a biodiversity gain condition under Schedule 7A of the 1990 planning Act, with a 10 percent objective. Defra's metric counts individual trees by size class and condition, and marks ancient and veteran trees irreplaceable.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The law is Schedule 14 of the Environment Act 2021, which inserts Schedule 7A into the Town and Country Planning Act 1990. Defra's guidance page (last updated July 14, 2026) and the Statutory Biodiversity Metric user guide (June 2026) supply the rest. All of it applies to England only.
The statutory condition
Schedule 7A deems every planning permission for development of land in England to carry a condition. The development may not begin until a biodiversity gain plan has been submitted to the planning authority and approved by it. The Environment Act 2021 Schedule 14 text shows the provision in force in stages, on November 3, 2023, February 12, 2024 and May 1, 2025, for specified purposes. Defra's guidance page records biodiversity net gain as mandatory from February 12, 2024.
The biodiversity gain objective is met when the biodiversity value attributable to the development exceeds the pre-development value of the onsite habitat by at least the relevant percentage. Paragraph 2 sets that percentage at 10. The Secretary of State may change it by regulations. Defra's page puts it as developers having to deliver a BNG of 10 percent.
The value attributable to the development is the total of three things:
- the post-development value of the onsite habitat,
- the value of any registered offsite biodiversity gain allocated to the development, and
- the value of any biodiversity credits purchased for it.
The Act defines biodiversity value as the value calculated under the biodiversity metric, a document the Secretary of State produces and publishes.
Baseline date and lost habitat
Paragraph 5 sets the pre-development value as the value of the onsite habitat on the relevant date. That date is the application date, or the grant date where permission is not granted on application. The applicant and the planning authority may agree an earlier date.
Paragraph 6 covers habitat damaged beforehand. Where activities on land on or after January 30, 2020 were not in accordance with planning permission, and they lowered the habitat's value, the pre-development value is taken as the value immediately before those activities. Defra's page gives a tree example: a developer who cuts down trees on the site must make up for that impact and also deliver the 10 percent.
Plan approval and the 30-year rule
A biodiversity gain plan specifies the steps taken to minimise adverse effects, the pre- and post-development values, any registered offsite gain and any credits bought. Paragraph 15 requires a planning authority to approve the plan if, and only if, it is satisfied on those matters, the objective being met among them. Defra's page adds that the authority must approve or refuse the plan within 8 weeks.
A significant increase in onsite value counts only if the planning authority is satisfied the enhancement will be maintained for at least 30 years after completion. The maintenance can rest on a planning condition, a planning obligation or a conservation covenant. Defra's page states the same 30-year minimum for off-site gains and significant on-site gains.
The order of delivery is on-site first, then off-site units, then statutory biodiversity credits as a last resort. Defra calls this the biodiversity gain hierarchy. From August 6, 2026 Defra's page says BNG does not apply to planning applications for developments of 0.2 hectares or below, and that minor developments can consider on-site and off-site delivery together.
Irreplaceable habitat
Paragraph 18 lets the Secretary of State modify or exclude Part 2 of the Schedule by regulations where the onsite habitat is irreplaceable habitat as the regulations define it. Those regulations must require arrangements to minimise the adverse effect on the habitat. Defra's page says separate arrangements apply to on-site irreplaceable habitat.
The metric user guide says all ancient and veteran trees must be recorded in the metric tool and marked as irreplaceable habitat. It lists hedgerows, lines of trees, woodland, open habitats and urban settings as places they occur. Each is recorded as an individual tree on a single data entry row, including those in woodland that is not ancient woodland. In an ecologically valuable line of trees, the linear length is not irreplaceable but the ancient and veteran trees in it are.
How the metric counts trees
The user guide classes trees as urban or rural. The broad habitat type "Individual trees" records individual rural trees, individual urban trees and lines, blocks or groups of trees in and around urban land. It is used for ancient and veteran trees wherever they stand. The hedgerow classifications "line of trees" and "ecologically valuable line of trees" are for rural lines only. Trees in overgrown non-native ornamental hedges, with leylandii as the example, are recorded as non-native ornamental hedges.
Individual trees that will be removed for any reason, development, disease or safety included, are recorded in the baseline and recorded as lost. Inside other tree habitats the guide asks for individual trees only in set cases. Those are all medium, large and very large trees in private gardens, and removed medium, large or very large trees in hedgerows, rural lines of trees, orchards, wood-pasture and parkland.
The metric's tree helper turns a tree count into an area. Its values represent canopy biomass and rest on the root protection area formula from BS 5837:2012. Table 15 in the user guide gives the size classes:
| Size class | Diameter at breast height | Area equivalent |
|---|---|---|
| Small | Greater than 7.5 cm, up to 30 cm | 0.0041 ha |
| Medium | Greater than 30 cm, up to 60 cm | 0.0163 ha |
| Large | Greater than 60 cm, up to 90 cm | 0.0366 ha |
| Very large | Greater than 90 cm | 0.0765 ha |
For a multi-stemmed tree the guide uses the diameter of the largest stem. Each count is split by condition state of poor, moderate or good. Each individual tree gets its own condition assessment, except trees in an urban line, block or group, which can be assessed together.
For new planting, the guide sets the size class by diameter at breast height at planting. Newly planted trees are recorded as small, including those under 7.5 cm. Forecast condition for a tree is the state that can realistically be reached within the project timeframe, which the guide says is usually 30 years.
Sources
- UK Parliament, Environment Act 2021, Schedule 14 (biodiversity gain as condition of planning permission), legislation.gov.uk revised text, read October 16, 2026
- Defra, Understanding biodiversity net gain, last updated July 14, 2026, read October 16, 2026
- Defra, Statutory biodiversity metric tools and guides, last updated June 2, 2026, read October 16, 2026
- Defra, The Statutory Biodiversity Metric: User Guide, June 2026, read October 16, 2026