Cabling and bolting: what ANSI A300 Part 3, BS 3998 and MIS310 describe
ANSI A300 Part 3 covers tree support systems in the United States, BS 3998 is the British standard for tree work, and MIS310 is the Australian and New Zealand standard for support systems.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page draws on what the named standards bodies publish. It is not training and does not teach the work. It carries no clause text and no installation steps.
The three documents
| Standard and publisher | Scope and edition as stated |
|---|---|
| ANSI A300 Part 3, Supplemental Support Systems (TCIA) | Installation and maintenance of cabling, bracing and guying. No year on the Part 3 page. |
| BS 3998:2010, Tree work. Recommendations (BSI) | General recommendations for tree work. 2010 is a full revision. |
| MIS310, Tree Support Systems (Arboriculture Australia and the NZ Arboricultural Association) | Specifying and installing support systems. No edition on the product page. |
ANSI A300 Part 3
TCIA says Part 3 applies to installation and maintenance of cabling, bracing and guying. Its topics also include tools and equipment, cabling and bracing objectives, dead-end and through-bracing, guying established and newly transplanted trees, propping, and hardware sizing and selection tables. The word bolting does not appear in the list. The standard speaks of bracing.
TCIA names four basic cabling methods: direct, triangular, box, and hub and spoke. It says triangular cabling should be preferred when maximum support is required, box cabling used only when minimal direct support is needed, and hub and spoke only when other installation techniques cannot be installed.
The advisory notices on the page say support systems need periodic inspections by an arborist, and that scheduling them is the tree owner's responsibility. Systems add support or limit movement. They do not provide primary support to a tree. TCIA adds that cables not two thirds of the way up the tree may mean the system is due for an update.
TCIA's overview of the A300 series says the standards are divided into parts, each on one aspect of woody plant management. They are used to develop written specifications for work assignments, and are not specifications in themselves. They do not apply to agriculture, horticultural production or silviculture, except where explicitly noted otherwise. ANSI requires a review every five years, and since the 2024 consolidation all parts share one review cycle.
BS 3998
BSI describes BS 3998 as general recommendations for tree work, with guidance on management options for established trees, including soil care and tree felling, and for overgrown hedges. The 2010 edition is a full revision. It took in changes in law and working practice on safety of people and property, decision-making criteria for tree work, wildlife and habitats, and veteran trees. It looks at the effect of work on one tree against its neighbours and does not cover management of tree populations. BSI's description does not name cabling or bracing.
MIS310
MIS310 is one of the Minimum Industry Standards written by Arboriculture Australia and the New Zealand Arboricultural Association with the arboriculture community in both countries. The series is peer reviewed and described as a shared body of knowledge that can underpin training. MIS310 gives a brief summary of the knowledge needed to select and install support systems.
Its contents list runs in three parts: an introduction covering process, responsibilities and liability; tree structure and health, from forces in structures to decay barriers; and designing and installing support systems. The third part has chapters on cabling, bracing, guying and propping, with inspection and maintenance sections for cabling, bracing and guying systems.
Sources
- Tree Care Industry Association, ANSI A300 Part 3, Supplemental Support Systems, read October 16, 2026
- Tree Care Industry Association, ANSI A300 Tree Care Standards overview, read October 16, 2026
- British Standards Institution, BS 3998:2010 Tree work. Recommendations, BSI Knowledge product page, read October 16, 2026
- New Zealand Arboricultural Association, MIS310 Tree Support Systems, product page, read October 16, 2026