ArbNation Join free

Canada: arborist apprenticeship and certificate of qualification exam, Ontario and BC

Ontario's Arborist apprenticeship generally takes 6,120 hours, and the Ontario Utility Arborist exam sheet gives a 70 percent pass mark. British Columbia splits the trade into Climbing Arborist and Utility Arborist programs, each with its own hours, exams and challenge route.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

Skilled Trades Ontario (STO) names Arborist as a trade under the Building Opportunities in the Skilled Trades Act, 2021, and runs its apprenticeship. SkilledTradesBC, the British Columbia trades authority, publishes a separate program profile for each of the Climbing Arborist and Utility Arborist trades.

Ontario: the Arborist apprenticeship

STO's Arborist page gives 6,120 hours, about three years, as the usual time to become competent. That is 5,400 hours of on-the-job work experience and 720 hours of in-school training.

The skills to be learned on the job are set out in the apprenticeship training standard. The apprentice's sponsor or trainer signs each section once the apprentice has shown the skill. In-school training has two levels, and STO lists these subjects:

  • Arborist safe work practices, tools, equipment and felling techniques
  • Arboricultural sciences and tree identification
  • Pruning and removal techniques
  • Plant health care and pest management
  • Crane assisted rigging and aerial devices
  • Tree planting practices

Depending on the training delivery agency, schooling runs as block release, as day release (one day a week from September to June), as part-time night school, or as online and correspondence study.

Finishing the apprenticeship earns a Certificate of Apprenticeship from STO. Passing the certifying exam earns a Certificate of Qualification. Arborist is a non-compulsory trade, so that certificate does not have to be renewed and holders do not appear on the STO Public Register.

Ontario exam: pass mark and weighting

STO's exam counselling sheet for the Utility Arborist trade (444B), updated September 11, 2023, sets the pass mark for the Ontario Certificate of Qualification exam at 70 percent. The exam is built on the General Performance Objectives, the skill sets in the training standard logbook. The sheet gives each skill set a share of the questions.

Utility Arborist (444B) exam: share of questions by skill set
Skill setShare of questions
Work planning and safety21%
Remove woody plants near energized electrical apparatus12%
Prune woody plants near energized electrical apparatus15%
Climb trees and work at heights near energized electrical apparatus10%
Prune or remove trees with an aerial device near energized electrical apparatus10%
Control underbrush near energized electrical apparatus6.5%
Maintain aerial device9%
Maintain and operate a chainsaw and chipper10%
Clear vegetation near transmission voltage conductors6.5%

The "work planning and safety" line covers the skill sets "Protect self and others", "Work in a safe environment" and "Plan job".

British Columbia: two programs side by side

SkilledTradesBC offers two routes to certification in each program: an apprenticeship with a sponsoring employer, or a challenge for people with extensive experience in the occupation. The Climbing Arborist profile (BC0338) is dated August 2014 and the Utility Arborist profile (BC0192) June 2015.

Climbing Arborist (BC0338)

ItemProfile
Technical training240 hours, or 8 weeks at 30 hours a week
Work-based training1,800 hours
Written examCertificate of Qualification exam, minimum 70%
Practical assessmentStandardized Practical Assessment: declared competent in all 7 units of competency by a registered Climbing Arborist Assessor
Usual program lengthAbout 1 year
Challenge route2,700 documented hours as a Climbing Arborist, plus an Arborist Technician Certificate of Qualification. The exam comes before the practical assessment
CreditA Utility Arborist Certificate of Qualification counts for 800 hours of work-based training, or 800 hours of work experience on the challenge route

Utility Arborist (BC0192)

ItemProfile
Technical trainingLevel 1: 180 hours (6 weeks). Level 2: 60 hours (2 weeks). Minimum 70% in each level
Work-based training2,378 hours, of which at least 1,200 are in proximity to energized power lines
ExamsLevel 1 standardized written exam, then the Certificate of Qualification exam, minimum 70%
Usual program lengthAbout 2 years
Challenge route3,567 documented hours, of which at least 1,800 are in proximity to energized power lines
CreditA Western Utility Arborist Association Tree Climber/Trimmer certification counts for the 3,567 challenge hours

For the Utility Arborist profile, proximity means a distance of three metres or less from a primary conductor with a voltage of 750 volts or greater. The sponsor completes a Work-Based Training Proximity Verification Declaration, and the Recommendation for Certification is signed by the sponsor and by a holder of a credential with sign-off authority.

The Utility Arborist profile adds two notes. Only applicants with credentials from outside British Columbia are accepted into the challenge process. And only certified Utility Arborists and Utility Arborist apprentices are permitted to perform tree pruning or falling work in proximity to energized power lines in the province.

Both profiles recommend Grade 10, including English 10, Mathematics 10 and Science 10, with Grade 12 preferred. They call this a desired level of skill, not a prerequisite. Youth can start an apprenticeship in high school through the Youth Train in Trades or Youth Work in Trades programs.

Gaps in the sources

No exam fee appears in any of the four documents. The 70 percent mark and the question weights printed for Ontario belong to the Utility Arborist sheet, so the Arborist trade's own exam breakdown is not given here. Alberta and the other provinces are not covered.

Sources