ArbNation Join free

Carabiner gate types: screw-lock, triple-action and auto-locking in standards and codes

A screw-lock gate is closed by hand. Triple-action and auto-locking gates close themselves and need three distinct movements to open. EN 12275, EN 362, UIAA 121 and a maker's data page carry the marks and kN figures.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page draws on the named standards, codes and makers. It is not training and does not teach the work.

The standards that cover carabiners

BSI lists BS EN 12275:2013, Mountaineering equipment. Connectors. Safety requirements and test methods, as published on 30 April 2013 and current. Its scope covers connectors for use in mountaineering, climbing and related activities, as part of the safety system that protects the climber from a fall from height.

BSI lists BS EN 362:2004, Personal protective equipment against falls from a height. Connectors, as published on 9 December 2004 and current. It covers requirements, test methods, marking and the manufacturer's information for connectors used as connecting elements in fall arrest, work positioning, rope access, restraint and rescue systems.

Gate words in the codes

TermWording
CarabinerWorkSafe New Zealand: a metal loop with a sprung or screwed gate used as a connector
Auto-locking carabinerWorkSafe New Zealand: one that locks automatically on closing and needs a minimum of three distinct movements to open
Snap hook (lanyard clip)WorkSafe New Zealand: the same auto-locking definition applies

The WorkSafe New Zealand code says all carabiners and snap hooks used as part of a climbing system shall be rated at or above 22 kN and be auto-locking. The New Zealand Arboricultural Association's guide to safety requirements repeats the 22 kN rating and the auto-locking rule for carabiners in a climbing system.

One maker's declared figures

A Petzl product page for an aluminium pear-shaped carabiner lists three locking systems on one body. Two close automatically, and one is closed by hand.

Petzl WILLIAM, declared by the maker
Locking systemHow the maker describes itGate opening
TRIACT-LOCKAutomatic locking with triple-action gate opening27 mm
BALL-LOCKAutomatic locking with triple-action gate opening, with lock indicator27 mm
SCREW-LOCKManual screw-lock, with a red band that shows when the carabiner is not locked28 mm

The page declares the same strengths for all three: major axis 27 kN, minor axis 8 kN and open gate 8 kN. Its certification line reads CE EN 362 and CE EN 12275 type B, with other marks and approvals.

Type letters and markings

Connector types carry a letter. Two letters appear in the sources. The Petzl page marks its carabiner type B. UIAA 121 sets an edge test for type K connectors, which must withstand a minimum load of 8 kN. The test text speaks of an auto-locking gate that closes and locks on the test pin. UIAA 121 says a copy of EN 12275:2013 has to be obtained to read the full requirements.

A second maker's marking page lists the markings its products may carry, varying by product type. They include the EN standard tested to, the CE mark with the number of the notified body, the minimum breaking strength (MBS) and working load limit (WLL) in kN, the rope diameter range, and a serial number. The MBS is the minimum load at which the product is expected to fail in laboratory testing. The WLL is the maximum load the maker allows in normal use.

The UIAA connector standard sits in the guide to UIAA safety standards. Marks on new gear have their own guide.

Sources