ArbNation Join free

Saw fuel, propane and batteries on a crew truck: DOT and Canadian TDG limits

US rule 49 CFR 173.6 sets a materials of trade exception: 8 gallons a packaging for most flammable liquids, 220 pounds a gas cylinder and 440 pounds in all. Canada's TDG Regulations use 30 kg a container and 500 kg in all.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The US text is 49 CFR 173.6, the materials of trade exceptions, with 49 CFR 173.150 on limited quantities of flammable liquids. The Canadian text is section 1.16 of the Transportation of Dangerous Goods Regulations (SOR/2001-286).

United States: materials of trade

Section 173.6 says that a material of trade (the term is defined in section 171.8) carried by motor vehicle in line with the section is not subject to the other requirements of the hazardous materials rules beyond those the section sets or refers to.

Section 173.6(a) caps the packaging size by class.

MaterialCap in 173.6(a)
Class 3 flammable liquid, Packing Group II or III30 kg (66 pounds) or 30 L (8 gallons) per packaging
Class 3 liquid, Packing Group I0.5 kg (1 pound) or 0.5 L (1 pint) per packaging
Division 2.1 flammable gas or Division 2.2 gas, in a cylinderGross weight not over 100 kg (220 pounds) per cylinder
Cells and batteries with no packing group in the hazardous materials table30 kg (66 pounds) net weight for each cell or battery, 500 kg (1102 pounds) in all on the vehicle
All materials of trade on the vehicle200 kg (440 pounds) aggregate gross weight

The 200 kg total does not count the diluted Class 9 mixtures under (a)(1)(iii) or the battery allowance under (a)(7)(iii). Section 173.6(a)(5) leaves out self-reactive materials, materials poisonous by inhalation and hazardous waste.

Packaging, marking and the driver

Under 173.6(b), packagings must be leak tight for liquids and gases, sift proof for solids, securely closed, secured against shifting and protected against damage. Each material goes in its maker's original packaging, or one of equal or greater strength. For gasoline, the packaging must be metal or plastic and meet the hazardous materials rules or the OSHA flammable liquid container rules in 29 CFR 1910.106(d)(2) or 1926.152(a)(1).

A cylinder holding a Division 2.1 or 2.2 gas must meet the rules on packaging, qualification, maintenance and use, but needs no outer packaging. Manifolding of cylinders is allowed if all valves are tightly closed. Cells and batteries must be packaged or secured to prevent short circuits, damage from shifting and accidental activation. Lithium cells and batteries covered by 173.185 must be of a type proven to meet part III, subsection 38.3 of the UN Manual of Tests and Criteria.

Section 173.6(c) covers hazard communication. A non-bulk packaging other than a cylinder is marked with a common name or proper shipping name, plus the letters RQ if it holds a reportable quantity of a hazardous substance. DOT specification cylinders carry the marks and labels the rules prescribe. The driver must be told that a material of trade is on board, whether a package holds a reportable quantity, and what the section requires.

Limited quantities as the other route

Section 173.6(a)(6) also admits a limited quantity package prepared under 173.150 and the other sections it lists. Section 173.150(b) excepts limited quantities of flammable and combustible liquids from labeling, unless the material goes by aircraft, and from specification packaging when they are in combination packagings. Such a package may not exceed 30 kg (66 pounds) gross weight, is not subject to the shipping paper rules in most cases, and is not subject to placarding.

LiquidInner packaging limit in 173.150(b)
Flammable liquid, Packing Group I0.5 L (0.1 gallon) net capacity each
Flammable liquid, Packing Group II1.0 L (0.3 gallons) net capacity each
Flammable liquid, Packing Group III, and combustible liquids5.0 L (1.3 gallons) net capacity each

Section 173.150(a) adds that these exceptions apply only where the section is referenced for the material in the 172.101 table. Shipping papers still apply if the material is a hazardous substance, hazardous waste or marine pollutant.

Canada: the 500 kg exemption

Section 1.16(1) of the Transportation of Dangerous Goods Regulations lifts Parts 3, 4 and 5 (documentation, safety marks and means of containment). It covers dangerous goods on a road vehicle, a railway vehicle or a vessel on a domestic voyage. These conditions apply.

  • Class 2 gases are in small means of containment that meet the Part 5 rules for gases.
  • Other dangerous goods are in containers of 30 kg gross mass or less, built and closed so there is no release that could endanger public safety, or in drums that meet section 5.12.
  • The gross mass of all the dangerous goods is 500 kg or less.
  • Each container shows the Part 4 safety marks on one side. The alternative is the shipping name plus the marks required under the Pest Control Products Act, the Hazardous Products Act or the Canada Consumer Product Safety Act. A shipping document travels with the load.

Section 1.16(2) takes some goods out of this exemption. They include Class 2.1 flammable gases in a cylinder over 46 L, Class 2.3 toxic gases, goods that need an ERAP, goods needing a control or emergency temperature, and Class 1 explosives other than a few named ones.

The Justice Laws site keeps an archived version of section 1.16 in force from July 5, 2023 to June 16, 2026. It differs in wording from the current text, for example on how the safety marks are named, but the 30 kg and 500 kg figures are the same in both.

Sources