Chainsaw carrying and transport: what regulators and a maker manual say about brake, handle and bar cover
OSHA's logging standard sets a 50-foot line for carrying a running saw with the brake engaged. HSE shows a cover on the guide bar when transporting, and CCOHS describes carrying by the front handle.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
The named codes and training bodies are described here as published. It is not training and does not teach the work. The wording of makers' manuals is not covered, apart from one professional saw family.
The wording at a glance
| Document | Carrying a saw | Moving a saw in a vehicle |
|---|---|---|
| OSHA, 29 CFR 1910.266 | Carried in a manner that prevents operator contact with the cutting chain and muffler. Shut down or brake engaged beyond 50 feet (15.2 m) | Racks, boxes, holsters or other means for tools so no hazard is created for a vehicle operator or passenger |
| OSHA chainsaw quick card | Shut off or brake engaged on rough or uneven terrain | Approved containers for transporting fuel |
| CCOHS | By the front handle, muffler away from the body, guard bar pointing behind | Points to a separate answer on handling, transportation and storage |
| HSE, INDG317 | Chain brake applied before moving off with a running saw | Guide bar cover fitted when transporting |
| California, 8 CCR 3425(a)(8) | Engine stopped beyond 100 feet or in hazardous conditions. Brake engaged or engine stopped beyond 10 feet | Not part of this paragraph |
| Maker operator's manual (professional saw family) | Chain brake engaged for transport | Transportation guard on the saw, spark plug cap removed, fuel and chain oil tanks emptied |
| University of Arkansas, FSA1009 | Shut off or brake engaged beyond 50 feet or across hazardous terrain | Approved containers for transporting fuel |
The OSHA logging standard
29 CFR 1910.266 covers logging and tree work. Its chain saw paragraph, (e)(2), says a saw is carried in a manner that prevents operator contact with the cutting chain and muffler.
The same paragraph sets a distance. The saw is shut down or the chain brake is engaged whenever it is carried further than 50 feet (15.2 m). Under 50 feet the same applies when terrain, underbrush or slippery surfaces may create a hazard.
Paragraph (e)(1)(vii) deals with tools in vehicles. Racks, boxes, holsters or other means are provided, arranged and used for the transportation of tools so that a hazard is not created for any vehicle operator or passenger.
Paragraph (d)(9) bars flammable and combustible liquids from the driver compartment and any passenger-occupied area of a machine or vehicle.
The OSHA quick card and the Arkansas fact sheet
The OSHA chainsaw quick card, OSHA 3269-04R of 2013, calls for shutting off the saw or engaging its chain brake when carrying it on rough or uneven terrain. Its fuelling section calls for approved containers for transporting fuel to the saw.
The University of Arkansas Division of Agriculture fact sheet FSA1009 repeats the 50-foot figure: shut off or engage the chain brake whenever the saw is carried more than 50 feet, or across hazardous terrain. It also names approved containers for fuel in transit.
California section 3425
Title 8 section 3425(a)(8) of the California Code of Regulations sets two distances. Power saw engines are stopped when carried more than 100 feet, or in hazardous conditions such as slippery surfaces or heavy underbrush. Chain brakes are engaged or the engine stopped when the saw is carried more than 10 feet.
CCOHS on carrying
The Canadian Centre for Occupational Health and Safety lists carrying among the saw dos. The saw goes by its front handle, with the muffler away from the body and the guard bar pointing behind. Its list of things not done includes carrying a saw while it is running.
CCOHS also lists removing the chain bar guard, the scabbard, among the checks before starting.
A maker manual on transportation
The operator's manual for one maker's professional saw family has a section called Transportation and storage. The fuel and chain oil tanks are emptied before transportation. The transportation guard on the product is used to prevent injuries or damage to the product. The manual adds that a saw chain that does not move can also cause serious injuries.
The same section has the spark plug cap removed and the chain brake engaged, and the product attached safely during transportation. Fuel goes in approved containers.
HSE on the bar cover and the brake
HSE's leaflet INDG317, Chainsaws at work, labels a diagram of a saw with the guide bar, and the label reads that a cover should be fitted when transporting. In its starting section, once a hot saw is running, operators apply the chain brake before moving off with it.
The leaflet also lists what a working area needs for any chainsaw job, which includes the operator either stopping the engine or applying the chain brake when not cutting.
Where the wording differs
OSHA, the Arkansas fact sheet and California print distances, and California's are 10 and 100 feet against the 50 feet of the other two. HSE mentions a bar cover for transport only in a diagram label, while the maker manual calls it a transportation guard and sets it with the brake and spark plug cap. CCOHS describes a way of holding the saw, while the OSHA standard describes an outcome: no contact with chain or muffler.
Sources
- OSHA, 29 CFR 1910.266 Logging operations, paragraphs (d)(9), (e)(1) and (e)(2), eCFR, read October 19, 2026
- OSHA, Chainsaw Safety quick card, OSHA 3269-04R 2013, read October 19, 2026
- CCOHS, Chainsaws: Safe Use of Chain Saws, fact sheet last revised February 27, 2025, read October 19, 2026
- HSE, Chainsaws at work, INDG317(rev2), January 2013, read October 19, 2026
- University of Arkansas Division of Agriculture, Chain Saw Safety, FSA1009, read October 19, 2026
- California Code of Regulations, Title 8, section 3425 Portable Power Hand Tools, Cornell LII, read October 19, 2026
- Husqvarna, 545 Mark II, 545G Mark II, 550XP Mark II and 550XP G Mark II operator's manual, edition code 544 - 013 - 19.11.2024, Transportation and storage, read October 19, 2026