Chainsaw operator training rules: OSHA, Washington, California and British Columbia
OSHA's logging standard, Washington's logging chapter, California's tree work orders and British Columbia's forestry Part 26 each print a training duty. British Columbia repealed its separate chainsaw training section in 2003.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
The four texts differ in scope. Federal OSHA and Washington write for logging. California writes for tree trimming, repair and removal. British Columbia writes for forestry operations and, in a separate block, for tree climbing.
Federal OSHA: 29 CFR 1910.266
The standard applies to all logging operations. It defines these as the work of felling and moving trees and logs from the stump to the point of delivery, including marking, felling, limbing, bucking, debarking, chipping, yarding, loading and unloading. Paragraph (i) is the training rule.
| Item | What the paragraph prints |
|---|---|
| Who pays | The employer provides training for each employee, supervisors included, at no cost to the employee |
| When | Before initial assignment for a new employee. Again when an employee is assigned new work tasks, tools, equipment, machines or vehicles, and when an employee shows unsafe job performance |
| Content | Safe performance of assigned tasks. Safe use, operation and maintenance of the tools, machines and vehicles the employee uses, with emphasis on the manufacturer's operating and maintenance instructions, warnings and precautions. Recognition of hazards. Worksite procedures. The requirements of the standard |
| Supervision | A new employee works under the close supervision of a designated person until the employee shows the ability to perform the new duties safely and independently |
| Trainer | All training is conducted by a designated person |
| Language | Training is presented in a manner the employee can understand, with materials suited to the employee's literacy and language skills |
| Records | A written certification record carries the employee's name or other identity, the training dates and the signature of the trainer or the employer. The most recent record is kept |
| First aid | Each employee receives first-aid and CPR training that meets Appendix B, and keeps it current |
Paragraph (i)(5) says an employee already trained in a listed element need not be retrained in it, and the employer remains responsible for each employee's ability to perform the work and operate the tools safely. Paragraph (i)(11) adds safety and health meetings at least each month.
Washington: chapter 296-54 WAC
Chapter 296-54 covers all types of logging operations, log road construction and similar activities. It excludes log handling at sawmills and other manufacturing operations. Section 296-54-507(1) lists the employer's responsibilities, and the first is to provide safety training for each employee. The chapter's chain saw section, 296-54-537, deals with equipment and use. It requires operators to inspect chain saws daily, and it prohibits a chain saw with a faulty clutch.
California: Title 8, sections 3421 and 3427
Section 3421 requires each work location where tree trimming, repair or removal is done to be under the direction of a qualified tree worker. Employees must be trained and instructed in areas that include the hazards of their job assignments and the proper and safe use of all equipment, safety equipment and personal protective equipment included. Training in electrical hazards, poisonous plants, harmful animals and pesticide work is also listed.
The employer must document the training before the employee performs the assignment without the oversight and observation of a qualified person. Refresher or additional training is required for an employee who has been seen violating the Article, who has been in an accident or near miss, or who receives a new assignment involving unfamiliar equipment, machinery, tools or safety-related work practices. Section 3421(m) requires first aid and CPR training, and new employees must have it within 90 days of hire.
Section 3427(a)(1)(B) names chain saws directly. A qualified tree worker placed in a tree by crane must receive instruction and training, and be competent, in listed areas that include the safe use of chain saws in tree work. The duty sits with the employer.
British Columbia: Occupational Health and Safety Regulation, Part 26
Section 26.3(1) says every worker in a forestry operation must receive the training necessary to safely perform the worker's duties. Records of the training must be kept in a form acceptable to the Board, and a worker may ask for a copy.
The regulation once had a section titled "Chainsaw training". Section 26.9 reads "Repealed" under B.C. Reg. 312/2003, effective October 29, 2003.
Falling has its own rules. Section 26.21 bars a worker from falling trees, or from bucking associated with falling, unless the worker is qualified to a standard acceptable to the Board and the work is within the worker's documented and demonstrated capabilities. Section 26.22 requires falling training acceptable to the Board and written certification as a competent faller. That training includes at least 30 days of one-on-one basic training, a written or oral examination, and supervised work as a trainee faller for 180 days or a shorter period set by a qualified supervisor or trainer. The supervisor evaluates the trainee weekly. Section 26.22(7) exempts a worker with at least two years of regular falling duties who is evaluated, examined and certified in writing.
Outside forestry operations, section 26.12.0.2 limits tree-climbing activities at the workplace to a qualified arborist or trainee arborist, and puts that duty on the employer. Section 26.1 defines a trainee arborist as a person undergoing on-the-job training under the direct supervision of a qualified arborist.
Sources
- US OSHA, 29 CFR 1910.266 logging operations (eCFR), read October 19, 2026
- Washington State Legislature, chapter 296-54 WAC safety standards for logging operations, read October 19, 2026
- California Code of Regulations, Title 8, section 3421 General (Cornell LII), read October 19, 2026
- California Code of Regulations, Title 8, section 3427 Safe Work Procedures (Cornell LII), read October 19, 2026
- WorkSafeBC, Occupational Health and Safety Regulation Part 26 Forestry Operations and Similar Activities, read October 19, 2026