ArbNation Join free

Climbing gear makers' manuals: where makers publish instructions for use

Makers of climbing hardware, rope tools and spurs each publish instructions for use in their own way. This page links the official page of each maker, with a line on what the page holds.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

Each link goes to the maker's own site. Makers are listed alphabetically. A maker appears only where its page was opened and read, so a missing maker does not mean it publishes nothing.

The instructions are written by each maker for each model. Some pages ask for a product name, a product code or an article number before they show a document. Nothing on this site submits a search or a form. Saw, chipper and helmet makers are in saw and machine manuals.

Makers and their document pages

MakerWhat the page holds, as the maker describes itLink
Climbing TechnologyA technical documentation section. It gives access to user's instructions, CE/EU declarations of conformity and PPE periodical check documents for products on its site, searched by product name, product code or product category.Maker page: CT technical documents
DMMA product markings page. DMM says a QR code on some products gives direct access to the instructions for use. Users should always refer to the instructions for details of compatible rope types and any extra restrictions.Maker page: DMM markings page
EdelridA downloads page. Instructions for use, declarations of conformity and norms can be downloaded there, found by typing a product name or an article number.Maker page: Edelrid downloads
Notch EquipmentA downloads page. It holds documents of conformity, user manuals and other documents, listed by product name. Its entries include rope wrenches, foot ascenders, friction savers, harnesses, carabiners, loop runners and climbers (spurs).Maker page: Notch downloads
PetzlA technical information section on each product page. The ZIGZAG tree care device page lists the instructions for use, the declarations of conformity and the PPE inspection procedure as separate documents. Petzl says it is "essential" to read and follow the instructions for use and all Petzl technical information.Maker page: Petzl ZIGZAG page
Samson RopeA product page for its Lash-It and Zing-It throwline twine, an HMPE twine with a Samthane coating. Samson lists two diameters, 1/16 inch (1.75 mm) and 3/32 inch (2.2 mm), with average strengths for unspliced twine. It lists no throw weight.Maker page: Samson Lash-It and Zing-It
Singing RockA PPE inspection page whose headings name inspection procedures, PPE lifetime, additional product marking, scannable periodic inspections and recall information. A separate download page lists catalogues, PPE inspection and EU declarations of conformity.Maker page: SR PPE inspection

Kinds of document

Three kinds of document come up on these pages. The first is the instructions for use. DMM describes a book pictogram on its products that marks where the user must read and understand them, and says they cover installation, operation, inspection, maintenance, limitations of use and safety precautions.

The second is the declaration of conformity. Climbing Technology, Edelrid, Notch and Petzl each list declarations of conformity beside the instructions. The third is the PPE inspection document. Climbing Technology and Petzl list it beside the instructions. Singing Rock gives inspection its own page.

Not covered here

This list recommends no product, repeats no figures from any manual and gives no use, inspection or retirement steps. The guide on buying new climbing gear and its markings reports what standards bodies and regulators say about the labels and papers that come with new gear.

Sources