Competent person and qualified person: the OSHA and CCOHS definitions for tree crews
OSHA defines a competent person as someone who can spot hazards and has authority to fix them, and a qualified employee under 1910.269 as someone who has had the set training. Canadian provinces word the terms differently.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
OSHA construction definitions in 1926.32
Section 1926.32 defines a competent person as one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous or dangerous to employees. That person also has authorization to take prompt corrective measures to eliminate them.
The same section defines "qualified" as one who has a recognized degree, certificate or professional standing, or who has extensive knowledge, training and experience. That person has successfully demonstrated an ability to solve or resolve problems relating to the subject matter, the work or the project.
Section 1926.32 also defines an "authorized person" as one approved or assigned by the employer to perform a specific type of duty or to be at a specific location at the jobsite.
Qualified employee under 1910.269
Section 1910.269 defines a qualified employee (qualified person) as an employee knowledgeable in the construction and operation of the electric power generation, transmission and distribution equipment involved, along with the associated hazards. The standard does not define "competent person" and uses "competent" only inside its training rules.
A note to the definition ties the title to training: an employee must have the training required by paragraph (a)(2)(ii) to be a qualified employee. That paragraph says each qualified employee must be trained and competent in five things:
- telling exposed live parts from other parts of electric equipment;
- determining the nominal voltage of exposed live parts;
- the minimum approach distances for the voltages involved, and keeping them;
- special precautionary techniques, protective equipment, insulating and shielding materials and insulated tools;
- recognizing electrical hazards and controlling or avoiding them.
A second note covers trainees. An employee on on-the-job training who has shown an ability to perform duties safely at that level, under the direct supervision of a qualified person, counts as a qualified person for those duties. Two exceptions apply to climbing and fall protection under paragraph (g)(2)(iv)(C).
Line-clearance tree trimmers in 1910.269
Section 1910.269 defines a line-clearance tree trimmer as an employee who is familiar with the special techniques and hazards of line-clearance tree trimming, through related training, on-the-job experience or both. A note says a line-clearance tree trimmer is not a "qualified employee" under the section unless the trimmer has the paragraph (a)(2)(ii) training.
Paragraph (a)(1)(i)(E) applies the section to this trimming when it clears space around electric lines or equipment for an organization that operates or controls them. The definition sets the distance at 3.05 metres (10 feet) for voltages to ground of 50 kilovolts or less.
When qualified employees do the work, the whole section applies, apart from paragraph (r)(1). When trimmers who are not qualified employees do it, paragraphs (a)(2), (a)(3), (b), (c), (g), (k), (p) and (r) apply. Those trimmers must be trained and competent in the first three subjects of the list above.
A note to the definition of line-clearance tree trimming puts trimming for a homeowner or a commercial entity that does not operate the lines outside the section. Tree trimming outside the section may be covered by other standards, and the note gives 1910.268 and 1910.331 through 1910.335 as examples.
Provincial definitions in Canada
CCOHS counts seven jurisdictions that define "competent": Alberta, Saskatchewan, Manitoba, New Brunswick, Newfoundland and Labrador, the Northwest Territories and Nunavut. Four define "competent person" or "competent worker": Saskatchewan, Ontario, Nova Scotia and Prince Edward Island. Saskatchewan defines both terms. The federal government and Yukon use "qualified person". British Columbia and Quebec use the terms without defining them.
| Jurisdiction and law | Term and definition in short |
|---|---|
| Alberta (OHS Act s. 1) | Competent. Adequately qualified, suitably trained and with sufficient experience to perform work safely without supervision or with minimal supervision. |
| Saskatchewan (OHS Regulations, 1996, s. 2) | Competent; competent worker. Possessing knowledge, experience and training to perform a specific duty. A competent worker includes a trainee under close and competent supervision. |
| Manitoba (Reg. 217/2006, s. 1.1) | Competent. Possessing knowledge, experience and training to perform a specific duty. |
| Ontario (OHS Act s. 1(1)) | Competent person. Qualified by knowledge, training and experience to organize the work and its performance, familiar with the Act and the regulations that apply, and having knowledge of any potential or actual danger to health or safety in the workplace. |
| Ontario (O. Reg. 213/91 s. 1(1)) | Competent worker. Qualified by knowledge, training and experience to perform the work, familiar with the Act and the regulations that apply, and having knowledge of all potential or actual danger to health or safety in the work. |
| New Brunswick (Reg. 91-191 s. 2) | Competent. Qualified to do assigned work in a way that protects health and safety, and knowledgeable about the Act, the regulations and the danger connected with the work. |
| Newfoundland and Labrador (2012 N.L.R. 5/12, s. 2(g)) | Competent. Qualified by knowledge, training and experience, and knowledgeable about the Act, the regulations and the danger associated with the assigned work. |
| Nova Scotia (N.S. Reg. 44/99, s. 2(g)) | Competent person. Same two-part wording as Newfoundland and Labrador. |
| Prince Edward Island (EC180/87, s. 1.4(f)) | Competent person. Qualified by knowledge, training and experience to do the assigned work, and knowledgeable about the Act, the regulations and the danger associated with the work. |
| Northwest Territories (R-039-2015 s. 1) and Nunavut (R-003-2016 s. 1) | Competent. Possessing the knowledge, experience and training to perform the function, task or duty. |
| Yukon (O.I.C. 2006/178, s. 1.02) | Qualified person. Has education, experience and training in recognizing, evaluating and controlling the hazards of the work. |
| Federal (SOR/86-304, s. 1.2) | Qualified person. Qualified by knowledge, training and experience to perform a specified duty safely and properly. |
What CCOHS adds on competence
CCOHS calls its explanation a general summary and points readers to their own jurisdiction for the legal reading. Five features usually combine in a competent person. They are qualification by knowledge, training and experience, and knowledge of the hazards of the task. They also know how to recognize, evaluate and control those hazards, can work without endangering anyone, and know the laws that apply.
CCOHS quotes Alberta Labour, which says the employer is responsible for deciding whether a worker is adequately qualified, suitably trained and sufficiently experienced, and should be able to justify that basis. No general list of the exact knowledge, training and experience can be given, because each organization sets the requirements for each position or task.
CCOHS treats a competent supervisor as much the same as a competent person, with extra duties because a supervisor acts for the employer and has authority over the work and the workers. It separates a certificate, a written record that a person completed a defined training event, from certification, which affirms that a person has met the standards of an evaluating body.
Sources
- US eCFR, 29 CFR 1926.32 Definitions, read October 19, 2026
- US eCFR, 29 CFR 1910.269 Electric power generation, transmission, and distribution, read October 19, 2026
- Canadian Centre for Occupational Health and Safety, Health and Safety Legislation in Canada: Competent, OSH Answers, read October 19, 2026