ArbNation Join free

Crane and lifting standards by country: code, title, scope and edition

Crane work in the United States, Canada, Britain and Australia sits under ASME B30, OSHA Subpart CC, CSA Z150, BS 7121 and AS 2550, and British lifting law adds LOLER. The table gives each code, its edition and its published scope.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. Each row below restates the scope text printed by the publisher, the regulator or a national standards listing. The codes themselves are sold by their publishers, and nothing here reproduces a clause.

Codes and scopes

Country, code and editionScope as published
United States: ASME B30.5, Mobile and Locomotive Cranes. Edition shown: 2025.Crawler cranes, locomotive cranes and wheel-mounted cranes, and variations that keep the same fundamental characteristics, driven by internal combustion engines or electric motors. Side boom tractors, railway and automobile wreck clearance cranes, digger derricks, cranes for energized electrical line service, knuckle boom cranes, trolley boom cranes and cranes rated at one ton or less are excluded.
United States: ASME B30.9, Slings. Edition shown: 2025.Fabrication, attachment, use, inspection, testing and maintenance of slings used for load handling with equipment in other B30 volumes, except as restricted in B30.12 and B30.23. Slings of alloy steel chain, wire rope, metal mesh, synthetic fibre rope, synthetic webbing and polyester fibre yarns in a protective cover are addressed.
United States: ASME B30.23, Personnel Lifting Systems. Edition shown: 2022, 36 pages.Hoisting and accessory equipment in certain B30 volumes that lifts, lowers, holds or transports personnel in a platform, by wire rope or chain from hoist equipment, or on a platform mounted on a boom. The lifting of personnel is not allowed with some B30 equipment, so the B30 volume for the hoisting equipment is consulted for applicability.
United States: ASME B30.26, Rigging Hardware. Edition shown: 2026.Construction, installation, operation, inspection and maintenance of detachable rigging hardware: shackles, links, rings, swivels, turnbuckles, eyebolts, hoist rings, wire rope clips, wedge sockets, rigging blocks and load indication devices.
United States: OSHA 29 CFR 1926 Subpart CC, Cranes and Derricks in Construction (section 1926.1400). Edition shown: Federal regulation, no edition.Power-operated equipment used in construction that can hoist, lower and horizontally move a suspended load, with its attachments. Paragraph (c)(13) excludes "Tree trimming and tree removal work."
Canada: CSA Z150, Safety code on mobile cranes. Edition shown: Z150:26, published February 28, 2026, replacing Z150:20.Design, construction, load rating, installation, erection, inspection, maintenance, repair, modification, test and operation of lattice and telescopic boom mobile cranes and ring-mounted cranes. Articulating boom cranes (Z150.3) and tower cranes (Z248) fall outside it, and so do in-scope machines converted to non-lifting uses such as power shovels and excavators.
United Kingdom: BS 7121-1, Code of practice for safe use of cranes, General. Edition shown: 2016, published January 31, 2016; BSI lists it as current, under review.Recommendations for the safe use of cranes permanently or temporarily installed in a work environment. It excludes cranes used for bungee jumping or similar entertainment and cranes in a fully automated storage or production system.
United Kingdom: L113, Safe use of lifting equipment: LOLER 1998 Approved Code of Practice and guidance. Edition shown: Second edition, December 2014, amended 2018.Equipment provided at work for lifting, the employers who use it and the competent persons who examine it. The code sets out what to do to comply with the Lifting Operations and Lifting Equipment Regulations 1998.
Australia: AS 2550.1, safe use of cranes, hoists and winches, general requirements. Edition shown: 2011, published March 18, 2011, third edition, replacing the 2002 edition.General requirements for the safe use of cranes, hoists and winches. Requirements for particular crane types sit in the other parts of AS 2550, and some requirements in Part 1 do not apply to every crane type.

Where tree work falls

OSHA lists tree trimming and tree removal work among the exclusions from Subpart CC. The exclusions also cover power shovels, excavators and wheel loaders, dedicated drilling rigs, helicopter cranes and machinery that hoists with a come-a-long or chainfall. Digger derricks are excluded when they auger holes for poles carrying electric or telecommunication lines, place and remove the poles, or handle associated materials.

Section 1926.1400 also lists attachments the subpart covers when used with a crane: hooks, magnets, grapples, clamshell buckets, personnel platforms, augers and drills, and pile driving equipment. Crane work on tree jobs is described in cranes in tree work.

Differences between the scope texts

ASME B30.5 limits itself to cranes driven by internal combustion engines or electric motors and leaves out machines rated at one ton or less. The Canadian code has no such rating floor in the scope text, but it describes the crane by boom type: lattice or telescopic, able to raise, lower and swing, with tackle that can be lengthened and shortened.

The Canadian text applies only to machines used for lifting. It names crawler-mounted, commercial truck-mounted, boom truck, wheel-carrier-mounted, railway, locomotive-mounted, rail-mounted and ring-mounted cranes, plus variations that keep their fundamental characteristics. A machine that has been converted to non-lifting use, such as a power shovel, dragline or concrete pump, is outside it.

In Britain the lifting rules are law and code together. LOLER is the regulation, the L113 code explains how to comply, and BS 7121-1 is a recommendation that BSI says is used by the Health and Safety Executive and courts as an indication of good practice. BSI says BS 7121-1 offers guidance on complying with LOLER and with the Provision and Use of Work Equipment Regulations 1998.

BSI lists the contents of BS 7121-1 as safe systems of work selection, erection and dismantling, maintenance, inspection, thorough examination, operation, and planning and management. Australia's Part 1 sets general requirements and leaves type-specific requirements to the other parts of AS 2550.

Sources