Descenders and self-braking devices in tree work: types and what NSW 4.6 says
SafeWork NSW section 4.6 says descent devices should have an automatic brake that activates when the operator removes the control hand. The UK industry code, the New Zealand code and the standards bodies add their own wording.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
Descenders and self-braking devices are described below as SafeWork NSW, the UK industry code, WorkSafe New Zealand and the standards bodies publish them. It is not training and does not teach the work.
SafeWork NSW section 4.6
Section 4.6 of the Tree works code of practice, March 2026, is titled Mechanical ascenders, descenders and rope grabs. It lists points to consider when selecting, using and maintaining them:
- They should suit the rope specifications in the system, with attention to the recommended rope diameter for each device.
- They should be self-locking, or used with another device that is self-locking.
- Descent devices should have an automatic braking function. The brake should activate when the operator removes the control hand from the device.
- Faulty or defective equipment is removed from service until repaired and assessed as fit for use.
- When mechanical ascenders are used, a backup on the main climbing line should be considered in case the ascender fails.
The code's glossary defines a descender as a knot or mechanical friction device used with a rope to allow descent from a tree in a safe and controlled manner. Section 4.7 covers Prusik loops and other friction knots. Elsewhere the code warns that excess heat from rapid descents on friction systems can damage or break the climbing system.
The UK industry code
The Industry Code of Practice for Arboriculture: Tree Work at Height, Edition 2, May 2020, defines a descending device as a manually operated device used for descending a rope. It often incorporates a smooth cam, a roller or another friction system to regulate the speed of descent. Some incorporate auto-locking functions and fail-to-safe mechanisms. Clause 3.10.6.7 lists what a descending device must do:
- Be built or configured so a fall cannot occur by release of a control element or grip position.
- Suit the length and duration of the descent.
- Take two-person loading if rescue needs it.
- Regulate the speed of descent.
- Match the rope type and diameter.
Clause 3.8.6.3 adds a separate test for a primary system used for ascent, movement and descent. It should let the operator regulate speed and brake reliably, and include an auto-locking or brake-assist system that cuts the chance of an uncontrolled descent.
The New Zealand code
The WorkSafe New Zealand Approved Code of Practice for Safety and Health in Arboriculture, November 2012, names descenders in two passages. Ancillary equipment used in climbing operations, with carabiners, rings and webbing, must be rated to at least 22 kN. The code also warns that lines running through friction hitches or descenders create heat, and heat can lead to rope failure. It defines a friction hitch as usually synthetic fibre rated to at least 22 kN, used to secure the climber to the line for controlled ascent, descent and work positioning.
Standards named for descent devices
The UK code's list of work equipment standards carries three that cover descent or braking devices:
- BS EN 341, Personal fall protection equipment. Descender devices for rescue.
- EN 15151, Mountaineering equipment. Braking devices with manually assisted locking.
- ISO 22159, Personal equipment for protection against falls. Descending devices.
It also lists BS EN 12841, Rope access systems. Rope adjustment devices. BSI shows the 2024 edition as published March 31, 2024, current and under review, and identical to EN 12841. BSI's page is a catalogue entry and does not print the scope.
Sources
- SafeWork NSW, Tree works code of practice, March 2026, sections 4.6 and 4.7 and glossary, read October 16, 2026
- WorkSafe New Zealand, Approved Code of Practice for Safety and Health in Arboriculture, November 2012, read October 16, 2026
- Arboricultural Association and partners, Industry Code of Practice for Arboriculture: Tree Work at Height, Edition 2, May 2020, clauses 3.8.6.3 and 3.10.6.7 and Part 6, read October 16, 2026
- British Standards Institution, BS EN 12841:2024 Personal fall protection equipment. Rope access systems. Rope adjustment devices, read October 16, 2026