EN 397, EN 12492 and ANSI Z89.1: industrial and mountaineering helmet standards
EN 397 covers industrial safety helmets and EN 12492 covers helmets for mountaineers. In the United States, OSHA 1910.135 names ANSI Z89.1 as the consensus standard for head protection.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. BSI Knowledge records both European helmet standards as withdrawn, and OSHA's head protection rule lists three editions of ANSI Z89.1.
The register
| Standard and title | Edition and status |
|---|---|
| EN 397, Industrial safety helmets | The BSI edition is BS EN 397:2012+A1:2012, published February 29, 2012. BSI Knowledge records it as withdrawn on May 2, 2025. |
| EN 12492, Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods | The BSI edition is BS EN 12492:2012, published May 31, 2012. BSI Knowledge records it as withdrawn on October 16, 2025. |
| ANSI Z89.1, American National Standard for Industrial Head Protection | OSHA 1910.135 lists the 2009, 2003 and 1997 editions. |
Scope of EN 397
BSI Knowledge describes EN 397 as a European standard on physical and performance requirements, methods of test and marking requirements for industrial safety helmets. The mandatory requirements apply to helmets for general use in industry.
Additional optional performance requirements apply only where the helmet manufacturer claims them. Industrial safety helmets are intended mainly to protect the wearer against falling objects and the brain injury and skull fracture that can follow.
The 2012+A1 edition supersedes EN 397:1995, which BSI lists as withdrawn. BSI lists its technical changes: updated normative references, EN 960 dated throughout the text, code letters extended to size designations, Annex B turned into an informative annex, and an updated bibliography.
Scope of EN 12492
BSI Knowledge gives the scope of EN 12492 in one sentence: it specifies safety requirements and test methods for safety helmets for use in mountaineering. Its subjects include marking, instructions for use, ultraviolet radiation and ageing tests.
At BSI, committee PH/6/6 handles it. Its ICS code is 13.340.20, head protective equipment, with 97.220.40 for outdoor and water sports equipment.
ANSI Z89.1 in the OSHA rule
OSHA 29 CFR 1910.135(a)(1) makes the employer responsible for each affected employee wearing a protective helmet in areas where there is a potential for injury to the head from falling objects. Paragraph (a)(2) adds a helmet that reduces electrical shock hazard, for employees near exposed electrical conductors that could contact the head.
Paragraph (b)(1) says head protection must comply with any of three consensus standards: ANSI Z89.1-2009, ANSI Z89.1-2003 or ANSI Z89.1-1997. Paragraph (b)(2) deems a device in compliance if the employer demonstrates it is at least as effective as one built to those standards. The rule was last amended in 2012.
Gaps in the records
OSHA names no edition of Z89.1 later than 2009, and BSI's records for the editions that followed EN 397:2012+A1 and EN 12492:2012 were not read. ISEA, the publisher of Z89.1, was not reached. Related pages are the guide to helmets by standard and the guide to helmet inspection rules.