ArbNation Join free

EN 566, EN 795, EN 354 and EN 355: sling, anchor, lanyard and energy absorber standards

SNV, the Swiss standards body, lists EN 566 for mountaineering slings, EN 795 for anchor devices, EN 354 for lanyards and EN 355 for energy absorbers, all with their current editions.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The SNV catalogue gives each of the four standards a page with its title, edition date, status and legal references. Three of the pages carry a scope abstract.

The register

Standard and titleEdition and status
SN EN 566, Mountaineering equipment. Slings. Safety requirements and test methodsMay 2017, current. It replaces the 2008 edition, and a 1997 edition is also withdrawn.
SN EN 795, Personal fall protection equipment. Anchor devicesOctober 2012, current. It replaces the 1997 edition, which is withdrawn.
SN EN 354, Personal fall protection equipment. LanyardsOctober 2010, current. It replaces the 2002 edition, which is withdrawn.
SN EN 355, Personal protective equipment against falls from a height. Energy absorbersMay 2002, current, effective July 1, 2002. SNV shows no later edition, amendment or corrigendum.

EN 566 and EN 795

SNV states that EN 566 specifies safety requirements and test methods for slings used for mountaineering, including climbing. It was published and took effect on May 1, 2017.

The abstract for EN 795 covers performance requirements and test methods for single-user anchor devices that are intended to be removable from the structure. These devices include stationary or travelling anchor points for attaching parts of a personal fall protection system under EN 363. The standard also gives marking requirements, instructions for use and guidance on installation.

EN 795 does not apply to several kinds of equipment. SNV lists devices that let more than one user be attached at once and devices used in any sport or recreational activity. It also lists equipment made to conform to EN 516 or EN 517, parts of structures installed for another use such as beams and girders, and structural anchors.

EN 354 and EN 355

SNV states that EN 354 specifies requirements, test methods, marking, information supplied by the manufacturer and packaging for lanyards. A lanyard that conforms is used as a connecting element or component in a personal fall protection system. SNV names restraint, work positioning, rope access, fall arrest and rescue systems.

The EN 355 page prints the title, dates and legal references but no abstract.

Legal references on the SNV pages

SNV lists the same references on all four pages. The Swiss federal authority is SECO, the standards are designated under Swiss law 930.115, and the EU law named is Regulation (EU) 2016/425. EN 354, EN 355 and EN 795 sit under SNV committee INB/NK 120, and EN 566 sits under INB/NK 131. Standards are sold through SNV as online access with or without a PDF download.

Related pages are the guide to gear standards by item and the guide to climbing lines and lanyards.

Sources