Footwear, chainsaw legwear, glove and earmuff standards: EN ISO 20345 to EN 352-1
EVS lists EN ISO 20345 and 20347 for safety and occupational footwear, EN ISO 17249 for chainsaw footwear, EN ISO 11393-2 for chainsaw leg protectors, EN 388 for gloves and EN 352-1 for earmuffs.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. Each entry below comes from the EVS standards catalogue, which gives the valid-from date, the edition history and the scope sentence for each standard.
Footwear
| Standard and title | Edition and history |
|---|---|
| EN ISO 20345, Personal protective equipment. Safety footwear | 2022 edition, valid from April 1, 2022. An amendment, A1:2024, took effect March 1, 2024. It follows the 2011 edition. |
| EN ISO 20347, Personal protective equipment. Occupational footwear | 2022 edition, valid from April 1, 2022, with the same A1:2024 amendment. It follows the 2012 edition. |
| EN ISO 17249, Safety footwear with resistance to chain saw cutting | 2013 edition, valid from December 9, 2013, with a corrigendum dated March 4, 2014. A 2004 edition and a 2007 amendment come before it. |
EVS gives the scope of EN ISO 20345 as basic and additional optional requirements for safety footwear used for general purpose. They cover mechanical risks, slip resistance, thermal risks and ergonomic behaviour. EN ISO 20347 has the same scope sentence for occupational footwear.
Both standards leave out high visibility. They name protection against chain saw injuries among the special risks covered by complementary job-related standards. EVS gives the scope of EN ISO 17249 as requirements for safety footwear with resistance to chain saw cutting.
Chainsaw leg protectors
EVS lists EN 381-5:1999, Protective clothing for users of hand-held chain saws, Part 5: Requirements for leg protectors, as withdrawn from October 15, 2019. EN ISO 11393-2:2019 is valid from October 15, 2019, and its history lists EN 381-2:1999 and EN 381-5:1999 as the earlier editions.
EVS gives the scope of EN ISO 11393-2 as performance requirements, test methods, design requirements, and identification and marking information for leg protectors that protect against cutting by handheld chainsaws. EN 381-5 defined design and set requirements for leg protectors, including identification, marking and information for the user. EVS shows no directive or regulation for EN 381-5 and lists Regulation (EU) 2016/425 for the 2019 standard.
Gloves and earmuffs
EVS lists EN 388:2016, Protective gloves against mechanical risks, as withdrawn from January 3, 2019. EN 388:2016+A1:2018 replaces it. The scope covers requirements, test methods, marking and information for gloves against abrasion, blade cut, tear, puncture and, if applicable, impact. EVS notes that the standard is meant to be used with EN 420 and that its test methods may also apply to arm protectors.
EN 352-1:2020, Hearing protectors, General requirements, Part 1: Earmuffs, is valid from December 1, 2020 and follows the 2003 edition. Its scope sets requirements for construction, design, performance, marking and user information, with sound attenuation measured under EN ISO 4869-1:2018. It does not apply to earmuffs outside the headsize range it defines or to earmuffs attached to head or face protection.
EVS adds a notice under Regulation (EU) 2016/425. The standard does not require a label showing the noise attenuation level, so compliance with it does not give a presumption of conformity with point 3.5, second paragraph, of Annex II of the Regulation.
Related pages are the guide to chainsaw standards by country and the PPE standards matrix.
Sources
- EVS, EVS-EN ISO 20345:2022 Safety footwear, read October 16, 2026
- EVS, EVS-EN ISO 20347:2022 Occupational footwear, read October 16, 2026
- EVS, EVS-EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting, read October 16, 2026
- EVS, EVS-EN 381-5:1999 Leg protectors (withdrawn October 15, 2019), read October 16, 2026
- EVS, EVS-EN ISO 11393-2:2019 Leg protectors for hand-held chainsaws, read October 16, 2026
- EVS, EVS-EN 388:2016 Protective gloves against mechanical risks (withdrawn January 3, 2019), read October 16, 2026
- EVS, EVS-EN 352-1:2020 Hearing protectors, Earmuffs, read October 16, 2026