European Tree Pruning Standard (ETPS, 2021): scope, contents and licence
The European Tree Pruning Standard was published in June 2021 by the TeST working group, with a second edition in November 2024. It covers amenity trees outside forests and is licensed CC BY-ND 4.0.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The standard below is described by its scope and contents. It is not training and does not teach the work.
Who made it
The standard's own front matter credits the working group Technical Standards in Treework, known as TeST, working with the European Arboricultural Council. The first edition is dated June 2021 and runs to 43 pages. Fourteen authors from eleven countries are named, with the Czech Republic's Jaroslav Kolařík as team coordinator. Two reviewers from the United Kingdom revised the English text. A second edition dated November 2024 is cited as EAS 01:2024, European Arboricultural Standards, European Arboricultural Council.
The Arboricultural Association's ARB Magazine ran two write-ups. In 2020 the TeST authors described an EU-funded three-year project that began in September 2019, built on a pilot, the European Tree Pruning Standard, with arborists from 12 countries. The partnership has 11 organisations. In 2022 Jaroslav Kolařík wrote that the project set out to produce three standards: tree pruning, tree planting, and tree cabling and bracing. He reported that the Erasmus+ programme accepted the application that funded it.
Scope
The standard says it defines the technical procedures used for pruning amenity trees. It applies to trees growing outside forests, from young to veteran, including mutilated or mismanaged trees. It does not apply to forest management or to fruit trees grown for fruit.
It sets out its aims as managing public safety and preserving the integrity of trees. Its wording is graded: "can" marks an option, "should" a recommendation and "must" a mandatory activity. Among its listed reasons for pruning are safety of people and traffic, clearance for traffic and buildings, and prevention and management of pests and diseases. It adds that trees usually do not need pruning, and it advises against pruning for trivial problems such as leaf and fruit fall or shading of solar panels.
Contents
| Chapter | Subject |
|---|---|
| 1 | Purpose and content, pruning objectives, and biosecurity |
| 2 | Normative references: qualification, general safety requirements, emergency action planning |
| 3 | Pruning techniques: general rules, branch removal methods, and five main operations (structural pruning, lateral crown reduction, upper crown reduction, crown shaping and restorative pruning) |
| 4 | Tree classification: by objective, development stage, and temporary versus permanent crown |
| 5 | A pruning matrix for broadleaved species, with numbered categories such as 1/A for formative pruning of a young tree, 4 for veteran tree management, and 5 and 6 for restorative pruning |
| 6 | Palm trees: introduction, pruning techniques and time of pruning |
| 7 | Planning and site management: soil impact, arisings and impact on neighbouring trees |
| Appendices | Species by ability to compartmentalise pruning wounds, woody plants with intensive spring sap flow, and species by the basic hierarchy strategy in the young tree |
In the biosecurity section the standard says people pruning trees professionally are at high risk of passing pests and diseases between trees and sites. It makes cleaning tools and equipment part of daily maintenance.
Licence and translations
The standard carries the licence line Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0). The same line adds that translations of the text into other languages are welcome, and it names a project contact for them. The 2024 Hungarian edition repeats the licence line and the copyright of the TeST working group.
The cover lists the title in 24 languages, from Bulgarian to Swedish. In 2022 Kolařík reported that the pruning standard had been translated into six languages, with the main material published in English and German in August 2022. The project sites he names are europeanarboriculturalstandards.eu and sdstrees.eu. The English first edition is also held on the site of Natuurinvest in Belgium, and the Hungarian second edition at faapolok.hu.
National annexes and later standards
Where countries could not agree, Kolařík wrote, each represented state prepared a National Annex. All 12 represented countries prepared one for each standard, and the annexes are usually available only in English and the national language. A follow-up project, European Consulting Standards, was to add three standards by 2024: tree assessment, tree value calculation, and protection of trees during development activities.
Standards from other bodies are covered in pruning standards and the standards register.
Sources
- TeST working group (Technical Standards in Treework) with the European Arboricultural Council, European Tree Pruning Standard, 1st edition, June 2021 (CC BY-ND 4.0), read October 15, 2026
- Arboricultural Association, Oikawa-Radscheit, Kolarik and Grabner, TeST: Technical Standards in Tree Work, ARB Magazine issue 188, Spring 2020, read October 15, 2026
- Arboricultural Association, Jaroslav Kolarik, European standards for tree care, ARB Magazine issue 199, Winter 2022, read October 15, 2026
- TeST working group, Európai díszfametszési szabvány (Hungarian edition of the Tree Pruning Standard), EAS 01:2024, 2nd edition, November 2024, read October 15, 2026