ArbNation Join free

Exposure limits side by side: noise, hand-arm and whole-body vibration, wood dust

OSHA sets its noise limit at 90 dBA over eight hours and starts hearing conservation at 85 dBA. Great Britain uses 80, 85 and 87 dB(A) for noise, 2.5 and 5.0 m/s2 for hand-arm vibration and 3 and 5 mg/m3 for wood dust.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

Noise

OSHA's standard 29 CFR 1910.95 asks for protection when sound exceeds the levels in its Table G-16, measured on the A scale at slow response. The table gives 90 dBA for 8 hours a day, 92 for 6 hours, 95 for 4 hours, 97 for 3 hours, 100 for 2 hours and 105 for 1 hour. Every 5 dBA more halves the time allowed. A separate action level of 85 dBA as an 8-hour time-weighted average, or a dose of fifty percent, starts monitoring, notification and the audiometric testing program.

NIOSH, the research body, gives a recommended exposure limit of 85 dBA averaged over an eight-hour workday. That is a recommendation, not an OSHA rule.

The Control of Noise at Work Regulations 2005 use three levels in Great Britain. The HSE page puts the lower action level at 80 dB(A), where employers assess the risk to hearing and give information and training. The upper action level is 85 dB(A), where employers provide hearing protection and hearing protection zones. Both are daily or weekly average exposures. The exposure limit value is 87 dB(A), taking account of any reduction from hearing protection, and workers must not be exposed above it.

Vibration

The Control of Vibration at Work Regulations 2005 set two sets of values, and HSE's regulations page prints the hand-arm pair as 2.5 and 5.0 m/s2 A(8). Employers should bring in technical and organisational measures to reduce exposure at the action value, and the limit value should not be exceeded. The whole-body vibration page prints 0.5 m/s2 A(8) as the action value and 1.15 m/s2 A(8) as the limit value.

Wood dust

HSE's wood dust page gives a Workplace Exposure Limit for hardwood dust of 3 mg/m3 and for softwood dust of 5 mg/m3, both as an 8-hour time-weighted average. For a mixture of hardwood and softwood dusts, the hardwood limit of 3 mg/m3 applies to all the wood dust present. The WEL must not be exceeded.

The values in one table

Exposure values as printed by each regulator
Hazard and bodyAction valueLimit value
Noise, OSHA85 dBA, 8-hour TWA90 dBA for 8 hours
Noise, NIOSHNot given85 dBA, 8-hour day (REL)
Noise, HSE80 and 85 dB(A)87 dB(A)
Hand-arm vibration, HSE2.5 m/s2 A(8)5.0 m/s2 A(8)
Whole-body vibration, HSE0.5 m/s2 A(8)1.15 m/s2 A(8)
Hardwood dust, HSENot given3 mg/m3, 8-hour TWA
Softwood dust, HSENot given5 mg/m3, 8-hour TWA

Gaps

An empty cell means the source gives no figure. OSHA's noise standard gives no vibration or wood dust value. Makers' declared saw figures have their own guide, and the health hazards guide lists other countries.

Sources