ArbNation Join free

FISA and AFAG guide list: what each numbered leaflet covers (301 to 310)

The Forest Industry Safety Accord publishes numbered chainsaw leaflets, FISA 301 to 310. HSE hosts the matching Arboriculture and Forestry Advisory Group leaflet AFAG308 on top-handled chainsaws.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

The named codes and training bodies are described here as published. It is not training and does not teach the work.

The two series

The Forest Industry Safety Accord (FISA) publishes its safety guides as numbered leaflets, each a PDF on its own page. The Arboriculture and Forestry Advisory Group (AFAG) is an advisory group of the Health and Safety Executive's Agriculture Industry Advisory Committee. It meets twice a year, and its members come from industry, HSE and the trade unions. The Arboricultural Association, the Forestry Commission, the Institute of Chartered Foresters, the International Society of Arboriculture, Lantra and City and Guilds NPTC are among the organisations on HSE's list. HSE hosts the AFAG308 leaflet on its own site.

Register of leaflets

FISA leaflets and AFAG308, with the publisher's scope wording
No.TitleScope as the publisher words it
FISA 301Using petrol driven chainsawsNamed by FISA 303 and 304 as the leaflet for PPE, the machine, preparing to work, maintenance, fuelling and starting procedures
FISA 302Basic chainsaw felling and manual takedownIndustry agreed safe working practices for using a chainsaw to fell and take down trees. Does not cover trees too small for a sink cut, or felling that uses wire cable, rope or machinery for directional or assisted felling. Updated June 2018
FISA 303Chainsaw sneddingSafe working practices for removing the branches of conifers and small hardwoods
FISA 304Chainsaw cross-cutting and manual stackingSafe working practices for cross-cutting and stacking timber
FISA 306Chainsaw clearance of windblowManual harvesting of areas where most adjacent trees are windblown or broken, and sporadic windblow, inside or outside standing crops. Mechanised systems should be considered as a safer alternative, in the leaflet's words
FISA 307Chainsaw felling of large treesFelling and crown breakdown of large trees in plantations, or single large trees. Excludes exceptional situations where the risk assessment shows advanced or alternative felling techniques are needed
AFAG308Top-handled chainsaws (revision 2)Safe working practices for a petrol-powered top-handled chainsaw in arboricultural off-ground work
FISA 310Use of winches in directional felling and takedownSafe working practices for a tractor or hand winch as an aid to directional felling and takedown in forestry and tree work

Gaps in the numbering

FISA's guide pages run from 304 to 306 and from 307 to 310, so there are no pages numbered 305, 308 or 309. The AFAG308 leaflet sits on HSE's site. HSE's chainsaw operator page links to AFAG308, to INDG317 Chainsaws at work and to the Forestry Industry Safety Accord website.

HSE on felling with ropes and winches

HSE's chainsaw operator page names the uses a control line, pull rope, anchor rope or winch can serve: an assisted fell, an anchor or back up, a felling aid or a winching operation. It calls for a clear understanding of the purpose. It warns that people holding only the CS30 and CS31 certificates, with little added experience, can find themselves in situations beyond their skill. Larger and awkward fells, and the hazards of garden arboriculture, are the cases it names. FISA 310 is the FISA leaflet for winch-assisted work.

Sources