Flagger cards for road work: what four state sources and the MUTCD record
Idaho, New Mexico, Washington and Oregon each set who issues a flagger card, how long it lasts and which other states' cards count. The MUTCD supplies the federal text on flagger training and signals.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The state material comes from the Idaho Transportation Department, the New Mexico Department of Transportation, Washington's workplace safety rule WAC 296-155-305 and the Oregon Department of Transportation. The federal text is Part 6 of the Manual on Uniform Traffic Control Devices (MUTCD).
At a glance
| State | Card issued or approved by | Card life and other states |
|---|---|---|
| Idaho | ITD-approved courses and instructors | Washington, Oregon, Montana and Utah cards recognized by agreement |
| New Mexico | ATSSA, ACNM, FHWA or an approved agency or firm | Refresher before the fourth anniversary |
| Washington | The state, or a reciprocity state | 3 years at most from issue; Oregon, Idaho, Montana |
| Oregon | Chemeketa Community College, on ODOT authority | Montana, Washington, Idaho cards by reciprocity, valid 3 years from issue |
Idaho
The Idaho Transportation Department (ITD) recognizes flagger cards when the course was taught using ITD-approved courses by approved instructors. ITD has approved the flagger courses of the Evergreen Safety Council and ATSSA. It lists eight institutions approved to teach and certify. They are College of Western Idaho, Treasure Valley Community College (Caldwell campus), the Idaho Technology Transfer (T2) Center for government agencies only, College of Southern Idaho, Idaho State University, Lewis-Clark State College, North Idaho College and Eastern Idaho Technical College.
Idaho takes part in a multi-state flagger reciprocity agreement with the transportation departments of Washington, Oregon and Montana, and in a separate agreement with the Utah DOT. ITD states that flaggers certified through courses those departments approve can cross state lines and work in Idaho.
New Mexico
New Mexico's Standard Specifications for Highway and Bridge Construction, section 618.2.1, deal with certification. Before work that needs flagger traffic control starts, a copy of the wallet-size Flagger Training certificate must be submitted. The certificate comes from ATSSA, ACNM, FHWA, or an agency or firm the Department approves.
Section 618.2.1.1 covers recertification. The contractor renews the traffic control supervisor's certification every four years. Flaggers must obtain refresher training that meets ATSSA, ACNM, FHWA or Department-approved requirements before the fourth anniversary date on the current certificate.
Washington
Washington's rule on signaling and flaggers, WAC 296-155-305, defines a flagger as a person who provides temporary traffic control. Under subsection 6, each flagger carries a valid Washington traffic control flagger card or a valid card from a state such as Oregon, Idaho or Montana, or another state with a reciprocity agreement with Washington. The card shows:
- that the required training is completed;
- the date of the training;
- the instructor's name;
- the state that issued the card;
- an expiration date no more than 3 years from issue;
- the flagger's picture, or the words "valid with photo ID".
The rule bases flagger training on the MUTCD. It lets personnel without a flagger course act as flaggers only in emergencies, and only until a certified flagger can take the position. An emergency is an unforeseen occurrence endangering life, limb or property. The rule also requires an orientation to the job site each time a flagger is assigned to a new project or job site conditions change a great deal.
Oregon
The Oregon Department of Transportation (ODOT) sets two routes for working as a flagger on Oregon state highways. One is a valid Oregon Certified Flagger card. The other is a valid Certified Flagger card from the transportation departments of Montana, Washington or Idaho. The reciprocity card is valid for three years from the date issued. ODOT has authorized the Chemeketa Community College Center for Business and Industry as the exclusive administrator of the flagger curriculum, materials, trainers and certification cards. Chemeketa provides a four-hour flagger class and keeps a list of certified private flagging trainers. ODOT adds that a permit for an overwidth or overheight load can require certified flaggers.
Part 6 of the MUTCD
The FHWA lists the 11th Edition of the MUTCD, December 2023, with Revision 1 dated December 2025 as the current version. Part 6 covers temporary traffic control, and Chapter 6D covers flagger control. Section 6D.01 is guidance rather than a mandate: because flaggers are responsible for public safety and make the most contacts with the public of all highway workers, they should be trained in proper traffic control practices and public contact techniques. They should be able to show that they can:
- give specific instructions in a clear, firm and courteous way;
- move quickly to avoid danger from errant vehicles;
- control signaling devices such as paddles and flags in frequently changing situations;
- apply proper traffic control practices, sometimes in stressful or emergency situations;
- recognize dangerous traffic situations and warn workers in time.
Section 6D.02 calls the STOP/SLOW paddle the primary and preferred hand-signaling device. The paddle has an octagonal shape on a rigid handle and is retroreflectorized at night. Section 6D.05 requires a paddle, a flag or an automated flagger assistance device, and prohibits hand movements alone in a one-lane two-way operation, except for emergency responders at incident scenes and uniformed law enforcement officers. For nighttime flagging, the MUTCD's guidance is high-visibility apparel that meets ANSI/ISEA 107 Performance Class 3.
Tree work beside roads is covered in the guide to traffic and roadside tree work.
Sources
- Work Zone Safety Information Clearinghouse, Flagger training and certification requirements, quoting Idaho Transportation Department, read October 15, 2026
- Work Zone Safety Information Clearinghouse, Flagger training and certification requirements, quoting New Mexico DOT Standard Specifications section 618, read October 15, 2026
- Washington State Legislature, WAC 296-155-305 Signaling and flaggers, read October 15, 2026
- Oregon Department of Transportation, Oregon Flagger Certification Training, read October 15, 2026
- Federal Highway Administration, MUTCD 11th Edition, December 2023, Part 6 chapters 6C and 6D, read October 15, 2026