Forest Service sawyer certification: the Saw Program, its cards and volunteer partners
The US Forest Service certifies sawyers who run chain saws and crosscut saws on National Forest System land. The card lasts three years, and partner groups can train and certify their own members.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
The named codes and training bodies are described here as published. It is not training and does not teach the work.
Program coverage
Forest Service Manual 2358 sets the Saw Program for activities on National Forest System lands. Federal, state, tribal and local agencies, contractors and crews under interagency fire cooperative agreements fall outside it. The program covers Forest Service employees, volunteers, volunteer partner groups and cooperator organizations using saws under an agreement. Training consultants are covered too.
The manual defines a saw as a chain saw, a crosscut saw, or a handsaw used on material larger than 5 inches DBH. Electric and battery chain saws count. The Forest Service article on the program counts more than 25,000 sawyers nationally. Its Intermountain Region works with over 40 partners and organizations.
Certification as the agency describes it
The agency describes certification for crosscut saws, chain saws or both, with bucking-only certifications for sawyers who do not fell trees. It calls for a multiday course with classroom and field training. The manual adds a field proficiency evaluation, a valid National Sawyer Certification Card, and current first aid and CPR, citing OSHA 1910.266(i)(7)(i).
| Item | Figure |
|---|---|
| Card validity | Three years on all National Forest System lands |
| Minimum age, chain saw sawyer | 18 (29 CFR Part 570, Subpart E) |
| Minimum age, crosscut sawyer | 16 |
| Card signing after evaluation | Should happen within 14 days |
| Evaluator for A level | A B sawyer with a designation letter from the unit saw coordinator, or a C sawyer |
| Evaluators for C level | Two, one of them a C Sawyer Evaluator |
The Forest Service describes three levels. An A sawyer is an apprentice who makes low-complexity cuts under a B or C sawyer. B sawyers are the majority and cut unsupervised in some moderately complex situations. C sawyers work in highly complex situations such as fire-weakened timber or storm damage, and the article says reaching that level can take seven to ten years.
Partners and volunteers
Under the manual, qualified sawyers may instruct and evaluate whatever agency or organization they belong to. A cooperator organization can certify only its own members, and only after the National Saw Program Manager and the Regional Program Manager send it an approval letter. The letter is subject to review at any time. Forest Service employees cannot sign cards for cooperator employees. Forest Service volunteers cannot sign cards for anyone.
The approval checklist asks for a named person responsible for entering records in the National Sawyer Qualification Tracking Database. It also asks for a training program built on human factors, sawyer safety, cutting area control and a cut plan, plus named instructors and evaluators and a designated certifying official. The Forest Service's April 2023 update describes that database as holding records for employees, volunteers and partners alike.
Training length and curriculum
A provisional evaluation standard, hosted by the Back Country Horsemen of America (BCHA) and headed Training and Evaluation Standards for USFS Saw Program: Chainsaw, sets out the course shape. Initial certification is 4 to 8 hours of classroom work followed by at least one day of hands-on field work on brushing, limbing and bucking. Felling adds a day when it is part of the course. The standard puts the total at two to three days. Field sessions and evaluations are capped at one instructor for every four students.
The Forest Service announced a curriculum called Developing Thinking Sawyers on April 3, 2023. It has seven in-person modules on safety, human factors and risk management. Firefighters who finish specific modules receive S-212 credit in the Incident Qualification and Certification System. Regions had until April 2024 to move over. Until then the agency kept three courses on its accepted list: the Missoula Technology and Development Center chain saw and crosscut course, the Game of Logging course and the NWCG S-212 course.
Where the program came from
A 2008 Forest Service work-group form, still posted as a Word file, sets out the reason for a national policy. It says the lack of national direction had left certification, recertification and training requirements inconsistent between regions, and that this blocked access to skilled sawyers and partnering with volunteer groups. It likened the goal to the Red Card program in fire. It asked sawyers to comment on 11 suggestions by August 1, 2008, and asked the Missoula center to deliver a final draft policy by June 30, 2009. It is a draft form, not policy.
The fire ladder is separate
Wildland fire sawyers follow a different set of positions under the National Wildfire Coordinating Group. The Texas A&M Forest Service chain saw procedure, revised June 8, 2026, shows the shape. It names S-112 Introduction to Chainsaw Operations for faller trainees, with S-212 accepted for courses taken before 2026. A trainee must be a Firefighter Type 2 before starting a FAL3 task book, and the final evaluator for a Basic Faller must be an Intermediate Faller (FAL2) or higher. Fallers repeat the RT-212 refresher every two years. The manual says its bucking-only classes are not used for fire management activities and have no Incident Qualification and Certification System equivalent.
Sources
- USDA Forest Service, Saw Program and certification (Making the cut), Spanish-language site page, read October 15, 2026
- USDA Forest Service, National Saw Program updates, April 3, 2023, read October 15, 2026
- USDA Forest Service, Forest Service Manual 2300 amendment 2300-2023-2, section 2358 Saw Program, effective March 29, 2023, read October 15, 2026
- USDA Forest Service, Crosscut and Chain Saw Policy work group information request, June 2008, read October 15, 2026
- USDA Forest Service Saw Program, Training and Evaluation Standards: Chainsaw, 2025 provisional, hosted by BCHA, read October 15, 2026
- Texas A&M Forest Service, Chainsaw operations procedure, revised June 8, 2026, read October 15, 2026