ArbNation Join free

Free LiDAR data by country: USGS 3DEP, Environment Agency in England, Elvis in Australia and LINZ in New Zealand

Four national programmes publish LiDAR elevation data as open data: USGS 3DEP in the United States, the Environment Agency in England, Elvis in Australia and LINZ in New Zealand. Each lists what it supplies.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

LiDAR uses pulses of laser light to measure distance, according to Land Information New Zealand. Four national agencies publish that data openly.

United States: USGS 3D Elevation Program

The mission of 3DEP, in its own words, is to respond to growing needs for current high-quality topographic data and 3D representations of the Nation's natural and constructed features. The program page and the products page both state that all 3DEP products are available free of charge and without use restrictions.

The products are lidar point clouds and digital elevation models (DEMs) at several horizontal resolutions. The point cloud is the foundation data for 3DEP in the conterminous United States and the source of the DEMs. USGS says most data collected in 2014 and later meet 3DEP specifications for quality level 2 nominal pulse spacing and vertical accuracy, and data collected before 2014 often do not. Alaska has IfSAR products in place of lidar.

USGS publishes spatial metadata by work unit in the Work Unit Extent Spatial Metadata (WESM) geopackage. USGS also runs a Lidar Explorer, a Dynamic Elevation Viewer and a lidar availability status application.

3DEP lidar quality levels, from the 3DEP Lidar Base Specification
LevelVertical accuracy (RMSEz)Nominal pulse densityDEM cell size
QL05 cm8 points or more per square metre0.5 m
QL110 cm8 points or more per square metre0.5 m
QL210 cm2 points or more per square metre1 m
QL320 cm0.5 points or more per square metre2 m

USGS defines a lidar quality level by two parts: the nominal pulse spacing or density, and the vertical positional accuracy. QL4 is imagery-based and QL5 is IfSAR, both with 5 m DEMs.

England: Environment Agency National LIDAR Programme

The Environment Agency programme gives elevation data at 1 m spatial resolution for all of England. In 2017 the country was divided into 302 survey blocks, captured in the winter months, about November to April, between January 2017 and February 2023. These are the phase 1 surveys. The data.gov.uk entry says repeat surveys of single blocks follow as up-to-date elevation data is needed, with no plan for a rolling re-survey of all phase 1 blocks.

Data is published through the DEFRA Data Services survey portal, with updates quarterly. Products come in 5 km tiles aligned to the Ordnance Survey grid. Surface models are GeoTiff rasters and the point cloud is in LAZ format.

Products for each survey block
ProductWhat the Environment Agency says it is
LIDAR point cloudThe discrete returns used to make the surface models, classified by an automated process into ground, low, medium and high vegetation
Digital Surface Model (DSM)Made from the last or only pulse returned to the sensor, and holds all ground and surface objects
Digital Terrain Model (DTM)Made from last-return pulses classed as ground, with surface objects filtered out and manual filtering to improve the ground surface
First Return DSMMade from the first or only pulse, so more likely to return the tops of trees and edges of buildings, and often usable in canopy height modelling
Intensity surface modelThe amount of laser light each pulse reflected, as a grayscale image

The entry lists the Open Government Licence and carries the attribution statement: Environment Agency copyright and/or database right 2022. All rights reserved.

Australia: Geoscience Australia and Elvis

Geoscience Australia describes Elvis (Elevation and Depth, Foundation Spatial Data) as a cloud-based system for finding and getting Australian elevation and bathymetry data for an area of interest. It is a partnership of agencies under the Intergovernmental Committee on Surveying and Mapping, bringing together open data from Commonwealth, state and territory governments.

Packaged products include drainage catchment 5 m DEMs built from high-resolution data on Elvis. The stated goal is the latest captured elevation over an area, not an average of every dataset. A national 5 m bare-earth DEM derived from LiDAR comes from some 236 surveys between 2001 and 2015 covering more than 245,000 square kilometres. Geoscience Australia also lists national DEMs from the Shuttle Radar Topography Mission at 1 second (about 30 m) and 3 second (about 90 m).

New Zealand: LINZ elevation data

LINZ says LiDAR-based elevation data is available for most of New Zealand, through its National Elevation Programme, as open-source data. Digital elevation models and point clouds are free to download or stream as Open Data, and can be previewed as 3D hillshade on the LINZ Data Service and LINZ Basemaps.

LINZ lists uses that include land management, natural hazards, climate change, 3D visualisation, surveying, engineering and archaeology. It also publishes the National Aerial LiDAR Base Specification for public sector procurement. The Provincial Growth Fund LiDAR programme, run with regional councils and MBIE, took national coverage to over 80 percent.

Sources