Gear marking decoder: what standard numbers on tree gear name
Each mark on tree gear names a European standard with a catalogue title and scope. EN 12492 is the mountaineering helmet, EN 361 the full body harness, EN 354 the lanyard and EN ISO 11393-2 the chainsaw leg protector.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. It gives the title and scope of each standard as the Estonian Centre for Standardisation and Accreditation catalogues them, and the marks HSE lists for chainsaw users. A mark names a standard. It does not tell whether a particular item is sound.
Marks with a catalogue entry
| Mark | Title | Scope |
|---|---|---|
| EN 12492 | Mountaineering equipment: helmets for mountaineers, safety requirements and test methods | Safety requirements and test methods for safety helmets for use in mountaineering |
| EN 361 | Personal protective equipment against falls from a height: full body harnesses | Requirements, test methods, marking, manufacturer information and packaging for full body harnesses |
| EN 354 | Personal fall protection equipment: lanyards | Requirements, test methods, marking, manufacturer information and packaging for lanyards, which are connecting elements in restraint, work positioning, rope access, fall arrest and rescue systems |
| EN ISO 11393-2 | Protective clothing for users of hand-held chainsaws, part 2: performance requirements and test methods for leg protectors | Performance requirements, test methods, design requirements, identification and marking for leg protectors against cutting by hand-held chainsaws |
| EN ISO 20345 | Personal protective equipment: safety footwear | Basic and additional requirements for safety footwear for general purpose use |
| EN ISO 17249 | Safety footwear with resistance to chain saw cutting | Requirements for safety footwear with resistance to chain saw cutting |
Editions and status in the catalogue
- EN 12492:2012 is shown as withdrawn from 3 November 2025, with EVS-EN 12492:2025 listed in its standard history. The catalogue says the withdrawn version keeps its presumption of conformity under Regulation (EU) 2016/425 until a matching amendment appears in the Official Journal.
- EN 361:2002 is valid from 1 November 2002, and EN 354:2010 from 4 October 2010.
- EN ISO 11393-2:2019 is valid from 15 October 2019. Its history lists EN 381-2:1999 and EN 381-5:1999 as earlier documents.
- EN ISO 20345:2022 is valid from 1 April 2022, and EN ISO 17249:2013 from 9 December 2013.
The harness scope notes that other body supports, specified in EN 358, EN 813 or EN 1497, may be built into a full body harness, and that fall arrest systems are specified in EN 363.
Marks HSE lists for chainsaw users
HSE's chainsaw PPE page names these marks by item.
| Item | Mark HSE names |
|---|---|
| Helmet, chainsaw work on the ground | BS EN 397, BS EN 14052 or BS EN 12492 |
| Helmet, chainsaw work off the ground | BS EN 12492, which HSE says AFAG recommends for climbing |
| Hearing protection | BS EN 352-1, 352-2 and 352-3 |
| Mesh visor | BS EN 1731 |
| Safety glasses or goggles | BS EN 166 |
| Gloves with chainsaw protection | BS EN 381-7 |
| Leg and groin protection | BS EN 381-5, with Type C recommended for aerial work and Type A possible where a risk assessment justifies it |
| Protective boots | BS EN ISO 17249, with the guarding described as good grip and protection at the front vamp and instep |
| Occasional users on even ground | BS EN 381-9, worn with steel toe-capped safety boots |
Sources
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN 12492:2012, read October 16, 2026
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN 361:2002, read October 16, 2026
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN ISO 11393-2:2019, read October 16, 2026
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN 354:2010, read October 16, 2026
- HSE, Chainsaw personal protective equipment (PPE), read October 16, 2026
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN ISO 20345:2022, read October 16, 2026
- Estonian Centre for Standardisation and Accreditation, catalogue entry EVS-EN ISO 17249:2013, read October 16, 2026