ArbNation Join free

Gear marking decoder: what standard numbers on tree gear name

Each mark on tree gear names a European standard with a catalogue title and scope. EN 12492 is the mountaineering helmet, EN 361 the full body harness, EN 354 the lanyard and EN ISO 11393-2 the chainsaw leg protector.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. It gives the title and scope of each standard as the Estonian Centre for Standardisation and Accreditation catalogues them, and the marks HSE lists for chainsaw users. A mark names a standard. It does not tell whether a particular item is sound.

Marks with a catalogue entry

Title and scope of each mark in the EVS catalogue
MarkTitleScope
EN 12492Mountaineering equipment: helmets for mountaineers, safety requirements and test methodsSafety requirements and test methods for safety helmets for use in mountaineering
EN 361Personal protective equipment against falls from a height: full body harnessesRequirements, test methods, marking, manufacturer information and packaging for full body harnesses
EN 354Personal fall protection equipment: lanyardsRequirements, test methods, marking, manufacturer information and packaging for lanyards, which are connecting elements in restraint, work positioning, rope access, fall arrest and rescue systems
EN ISO 11393-2Protective clothing for users of hand-held chainsaws, part 2: performance requirements and test methods for leg protectorsPerformance requirements, test methods, design requirements, identification and marking for leg protectors against cutting by hand-held chainsaws
EN ISO 20345Personal protective equipment: safety footwearBasic and additional requirements for safety footwear for general purpose use
EN ISO 17249Safety footwear with resistance to chain saw cuttingRequirements for safety footwear with resistance to chain saw cutting

Editions and status in the catalogue

  • EN 12492:2012 is shown as withdrawn from 3 November 2025, with EVS-EN 12492:2025 listed in its standard history. The catalogue says the withdrawn version keeps its presumption of conformity under Regulation (EU) 2016/425 until a matching amendment appears in the Official Journal.
  • EN 361:2002 is valid from 1 November 2002, and EN 354:2010 from 4 October 2010.
  • EN ISO 11393-2:2019 is valid from 15 October 2019. Its history lists EN 381-2:1999 and EN 381-5:1999 as earlier documents.
  • EN ISO 20345:2022 is valid from 1 April 2022, and EN ISO 17249:2013 from 9 December 2013.

The harness scope notes that other body supports, specified in EN 358, EN 813 or EN 1497, may be built into a full body harness, and that fall arrest systems are specified in EN 363.

Marks HSE lists for chainsaw users

HSE's chainsaw PPE page names these marks by item.

Marks named by HSE
ItemMark HSE names
Helmet, chainsaw work on the groundBS EN 397, BS EN 14052 or BS EN 12492
Helmet, chainsaw work off the groundBS EN 12492, which HSE says AFAG recommends for climbing
Hearing protectionBS EN 352-1, 352-2 and 352-3
Mesh visorBS EN 1731
Safety glasses or gogglesBS EN 166
Gloves with chainsaw protectionBS EN 381-7
Leg and groin protectionBS EN 381-5, with Type C recommended for aerial work and Type A possible where a risk assessment justifies it
Protective bootsBS EN ISO 17249, with the guarding described as good grip and protection at the front vamp and instep
Occasional users on even groundBS EN 381-9, worn with steel toe-capped safety boots

Sources