Getting started in tree climbing: the route from first day to first job
HSE, the Arboricultural Association, WorkSafe New Zealand and TCIA each attach training to climbing work. The common points are task-specific training, rescue skills, supervision for trainees and a second person on site.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The named codes and training bodies are described here as published. It is not training and does not teach the work. HSE text is adapted from HSE pages published under the Open Government Licence v3.0.
What HSE attaches to climbing
The Work at Height Regulations 2005 do not ban climbing work, HSE states. Employers must plan the work and choose work equipment that makes it as safe as possible. Climbing with a personal fall protection system, meaning ropes and a harness, is allowed only when three conditions hold.
- A risk assessment has shown the work can be done safely using that system.
- Using other, safer work equipment, such as a MEWP (a mobile work platform), is not justified.
- The user and enough available people have task-specific training, including rescue techniques.
HSE's aerial work page sets a minimum of two people on every aerial job. One member of the ground team must be available, competent and equipped to carry out an aerial rescue without delay. HSE also says a chainsaw is never used off the ground unless the operator has been trained in safe working techniques.
Training named by each source
| Source | What it names |
|---|---|
| HSE, United Kingdom | Task-specific training including rescue. Chainsaw operators in forestry and arboriculture must be trained and competent, and HSE points to the awarding bodies Lantra Awards and City and Guilds NPTC for current qualifications. |
| Arboricultural Association ICoP, May 2020 | Training for work at height must be delivered to a nationally recognised or equivalent standard, in a safe, controlled environment, by competent and experienced people. Everyone who receives it should, as a minimum, also be trained to take part in rescuing an injured worker from the tree. An operator who uses a chainsaw at height should hold a certificate of competence or national qualification, unless the operator is in training and adequately supervised. |
| WorkSafe New Zealand code, 2012 | All arborists must be suitably qualified, with competency outcomes documented. An employer hiring an inexperienced worker must provide instruction and close supervision until competence is shown, and training off the ground must be one-to-one. Work above three metres must have a second person on site trained in aerial rescue. |
| TCIA, United States | Tree Climber Specialist 1: Fundamentals, an introductory course for people beginning a career as a tree climber. |
The TCIA course list
The Tree Care Industry Association (TCIA) describes its Tree Climber Specialist program as a route into climbing with a portable industry credential. For employers, TCIA says the program verifies, against OSHA and ANSI Z133.1 guidelines, that employees understand the basic safety concepts for climbing and are qualified to climb for the company.
The first course covers tree climbing basics, equipment and ropes, knots and hitches, tie-in and anchor points, ascent, work positioning and the use of climbing spikes. It blends online learning with on-the-job skills demonstrations and ends in a certificate. TCIA lists 6.5 ISA and 6.5 CTSP continuing education units for it.
The program has two further courses. Tree Climber Specialist 2: Aerial Work covers climbing techniques, an introduction to the stationary rope system, climbing with it, working on a spar and proficiency in working a tree. Tree Climber Specialist 3: Climbing Aerial Rescue covers rescue regulation and standards, emergency response, protocol, hazards, techniques, first aid and working with emergency medical services.
Ground crew duties
HSE lists duties for the ground team: plan the job with the climber before work starts, keep communication open at all times, watch the climber and pass up tools. Ground staff also keep working ropes free of knots, kinks and branch wood, and control working ropes without wrapping them around any part of the body. On busy sites HSE suggests a dedicated ground person for each climber.
For the rules of six regulators, see what the regulators attach to climbing work. For ways into the trade, see routes into tree work.
Sources
- HSE, Tree climbing, read October 15, 2026
- HSE, Aerial work, read October 15, 2026
- WorkSafe New Zealand, Approved Code of Practice for Safety and Health in Arboriculture, November 2012, read October 15, 2026
- Arboricultural Association, Industry Code of Practice for Arboriculture: Tree Work at Height, second edition, May 2020, read October 15, 2026
- Tree Care Industry Association, Tree Climber Specialist 1: Fundamentals, read October 15, 2026
- Tree Care Industry Association, Tree Care Academy, Tree Climber Specialist, read October 15, 2026