Hardwood and softwood lumber grades: grade names and rule books from NHLA, ALSC and NLGA
The National Hardwood Lumber Association writes the hardwood grading rules, from FAS down to Number 2B Common. Softwood grades come from six rule books, including Canada's from the National Lumber Grades Authority.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The National Hardwood Lumber Association (NHLA), the American Lumber Standard Committee (ALSC), the National Lumber Grades Authority (NLGA) and the American Hardwood Export Council (AHEC) are the bodies named. No rule text is copied. Rules from Britain, Europe and Australia are not covered.
Hardwood: the NHLA rules
NHLA calls itself the official governing body that develops, maintains and interprets the hardwood lumber grading rules in North America. Its page describes the rules as defining the standard for classifying hardwood lumber for more than 125 years, and the NHLA site dates its grading authority to 1898. The rule book is titled Rules for the Measurement and Inspection of Hardwood and Cypress. NHLA offers the book in several languages and has National Inspectors who help with rule interpretation, dispute resolution and grader training.
NHLA reviews the rules every four years and takes rule change proposals. Active Members vote by ballot, with 30 days to return it, and a change needs a two-thirds majority of the votes cast. Adopted changes take effect on January 1 of the following year.
Hardwood grade names
AHEC summarizes the NHLA standard grades for sawn lumber. Its summary is the source of the minimums below, and it points readers to the NHLA book for the full description. AHEC adds that between buyer and seller any exception to the rules is permissible.
| Grade | Minimum board | Clear cuttings |
|---|---|---|
| FAS (First and Seconds) | 6 inches wide, 8 feet long | 83 1/3 to 100 percent |
| FAS-One-Face | 6 inches wide, 8 feet long | Better face FAS, poor face Number 1 Common |
| Selects | 4 inches wide, 6 feet long | Same as FAS-One-Face |
| Number 1 Common | 3 inches wide, 4 feet long | 66 2/3 up to 83 1/3 percent |
| Number 2A Common | 3 inches wide, 4 feet long | 50 up to 66 2/3 percent |
| Number 2B Common | Same as 2A | Same as 2A, with cuttings only required to be sound |
AHEC names Number 1 Common the Cabinet grade in the USA and Number 2A Common the Economy grade, and says Number 2A is the grade of choice for the US hardwood flooring industry. FAS clear cuttings must be at least 3 inches by 7 feet or 4 inches by 5 feet. AHEC says the Selects grade is usually associated with the northern regions of the USA. Number 2 Common is a combination of 2A and 2B with no required percentage of either.
The AHEC summary says minimum width and length vary with species and with whether the board is green or kiln dried.
Softwood: six rule books
The ALSC says accredited agencies in its lumber program grade under one or more of six sets of grading rules, and that each is available from the publishing agency.
- Standard Grading Rules for Northeastern Lumber, from the Northeast Lumber Manufacturers Association.
- Standard Specifications for Grades of California Redwood Lumber, from the Redwood Inspection Service.
- Standard Grading Rules for Southern Pine, from the Southern Pine Inspection Bureau.
- Standard Grading Rules for West Coast Lumber, from the Pacific Lumber Inspection Bureau.
- Western Lumber Grading Rules, from the Western Wood Products Association.
- Standard Grading Rules for Canadian Lumber, from the National Lumber Grades Authority.
NLGA says it is the only recognized rules-writing body for lumber grades and standards in Canada. Its grading rule incorporates the National Grading Rule for Dimension Lumber, which establishes standard lumber grades and grade names for all commercial species of dimension lumber, so users get uniform design criteria across Canada and the US. The Canadian Lumber Standards Accreditation Board approves and enforces the NLGA rule for Canadian Standard Lumber, and the ALSC Board of Review does so for American Standard Lumber. NLGA members are the independent grading agencies operating in Canada.
The ALSC and NLGA pages do not print the softwood grade names themselves, such as the names within the National Grading Rule for Dimension Lumber.
Sources
- National Hardwood Lumber Association, home page and NHLA Grading Rules page, read October 15, 2026
- American Lumber Standard Committee, Lumber: Grade Rules Organizations, read October 15, 2026
- National Lumber Grades Authority, home page, read October 15, 2026
- American Hardwood Export Council, The Grades: grading sawn lumber, read October 15, 2026