Hearing tests and hearing conservation programmes: OSHA, HSE and WorkSafeBC
OSHA 1910.95 sets baseline and annual audiograms from 85 dBA, HSE describes hearing checks that usually run yearly for two years then every three, and WorkSafeBC sets a test within 6 months and every 12 months.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. Noise levels for saws and chippers are in saw noise and vibration values.
At a glance
| Source | First test | Repeat tests |
|---|---|---|
| OSHA 1910.95 | Baseline audiogram within 6 months of first exposure at or above the action level (85 dB TWA) | At least annually after the baseline |
| HSE | Ideally before exposure starts, to give a baseline | Usually annually for the first two years, then three-yearly |
| WorkSafeBC | As soon as practicable, no later than 6 months after employment starts | At least once every 12 months after the initial test |
OSHA 1910.95: audiometric testing program
Paragraph (g) of the standard requires the employer to establish and maintain an audiometric testing program for all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels, at no cost to them. Tests are performed by a licensed or certified audiologist, otolaryngologist or other physician, or by a technician certified by the Council of Accreditation in Occupational Hearing Conservation or one who has shown competence. A technician reports to an audiologist, otolaryngologist or physician.
The baseline audiogram is the reference for later tests. It is taken within 6 months of first exposure at or above the action level. Where mobile test vans are used, the standard allows 1 year, and employees wear hearing protectors for any period beyond 6 months until the baseline is done. A baseline test is preceded by at least 14 hours without exposure to workplace noise, and hearing protectors may stand in for that quiet period. The employer notifies employees to avoid high non-occupational noise in that 14-hour period.
At least annually after the baseline, a new audiogram is obtained for each exposed employee and compared with the baseline. Tests are pure tone, air conduction, with test frequencies of at least 500, 1000, 2000, 3000, 4000 and 6000 Hz, taken separately for each ear.
Standard threshold shift
The standard defines a standard threshold shift as a change in hearing threshold relative to the baseline of an average of 10 dB or more at 2000, 3000 and 4000 Hz in either ear. The standard allows an age correction using its appendix F.
- The employee is informed in writing within 21 days of the determination.
- The employer may obtain a retest within 30 days and treat it as the annual audiogram.
- Unless a physician finds the shift is not work related, employees without hearing protectors are fitted, trained and required to use them. Employees already using protectors are refitted and retrained, with greater attenuation if needed.
- An employee may be referred for a clinical audiological or otological evaluation when more testing is needed.
- An annual audiogram can replace the baseline when the reviewing professional finds the shift persistent or the hearing much improved.
Audiometric test records are kept for the duration of the affected employee's employment. Noise exposure measurement records are kept for two years. Employees, former employees and their designated representatives can obtain the records on request.
HSE: health surveillance for hearing
HSE describes health surveillance for hearing as regular hearing checks in controlled conditions, telling employees the results, keeping health records, and sending employees to a doctor where hearing damage is found. It ideally begins before people are exposed, for new starters or those changing jobs, to give a baseline. It can start at any time for people already exposed.
The checks are usually annual for the first two years of employment and then at three-yearly intervals. HSE notes that they may need to be more frequent if a hearing problem is detected or the risk of damage is high. Someone with appropriate training does the checks, and an occupational health professional, such as a doctor or a suitably trained nurse, controls the programme. The employer holds responsibility for carrying it out properly.
HSE tells employers to consult the trade union safety representative or employee representative and the employees concerned before starting. Its page also covers health records, which are kept and made available to employees. The confidential medical records stay with the doctor.
WorkSafeBC: Part 7, noise
Section 7.2 of the Occupational Health and Safety Regulation sets noise exposure limits of 85 dBA Lex daily noise exposure level and 140 dBC peak sound level. If noise exceeds either limit, section 7.5 requires a noise control and hearing conservation program with seven elements: noise measurement, education and training, engineered noise control, hearing protection, posting of noise hazard areas, hearing tests and annual program review.
Under section 7.8, the employer gives exposed workers an initial hearing test as soon as practicable after employment starts, and not later than 6 months after. A test follows at least once every 12 months. Tests are given by a hearing tester authorized by the Board, and the employer has the tester send the results to the Board. Section 7.9 requires the annual results to be kept as long as the worker is employed. They are confidential and not released without the worker's written permission, except as the law requires.
The WorkSafeBC noise page states that anyone working around hazardous noise must take part in a hearing loss prevention program, which includes annual hearing testing. It calls noise-induced hearing loss permanent and irreversible.
Sources
- U.S. Department of Labor, OSHA, 29 CFR 1910.95 Occupational noise exposure, current eCFR text, read October 15, 2026
- Health and Safety Executive (Great Britain), Health surveillance for hearing, page updated March 17, 2025, read October 15, 2026
- WorkSafeBC, Occupational Health and Safety Regulation, Part 7 Noise, vibration, radiation and temperature, Division 1 Noise Exposure, read October 15, 2026
- WorkSafeBC, Noise (hazards and exposures page), read October 15, 2026