Heat rules for outdoor workers in New South Wales
New South Wales sets no temperature at which outdoor work must stop. SafeWork NSW guidance puts heat under the standard four-step risk process, with the duty held by the person running the business.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The regulator is SafeWork NSW, reached on 13 10 50. Its page on managing extreme heat is guidance. It is not a heat regulation with a number in it. The national picture is in the Australia heat page.
Guidance, not a numeric rule
SafeWork NSW says extreme heat should be managed by the standard risk management approach: identify the hazard, assess the risks, control the risks and review the controls. Workers and their health and safety representatives must be consulted at each step.
No temperature at which work stops is named. The figure of 30 degrees Celsius sits in one of 15 questions that help decide whether heat is an issue at a workplace: can workers be exposed to temperatures above 30 degrees Celsius or to high humidity?
Another of the 15 questions asks whether workers are outdoors when the UV Index is 3 or above. Others ask about protective clothing, hot surfaces, poor ventilation and whether anyone has been affected by heat before.
The four steps
| Step | What SafeWork NSW lists |
|---|---|
| 1. Is heat an issue | A set of 15 yes or no questions, from past heat illness to non-insulated walls and ceiling spaces in direct sun |
| 2. Assess the risks | Air temperature, humidity, air movement and radiant temperature, plus clothing, physical activity and fitness of the workers |
| 3. Control the risks | Eliminate the source so far as is reasonably practicable; if not, reduce the risk using the hierarchy of control |
| 4. Review controls | Regular review, which belongs in the workplace heat management plan |
Who holds the duty
The duty sits with the PCBU, the person conducting a business or undertaking. A PCBU must consider the environmental and personal factors and eliminate the risks so far as is reasonably practicable.
Agreement with workers and their representatives may also set specific heat conditions at which work will be stopped. Any agreed parameters go into the workplace heat management plan.
Controls and the hierarchy
Where heat cannot be eliminated, SafeWork NSW sorts controls by level. Level 1 is elimination, such as moving the work to another time or place. Level 2 is isolation and engineering: shade structures, fans, air-conditioned cabins in mobile plant, reflective cladding and mechanical aids that cut strenuous work.
Level 3 holds administrative controls, training and protective equipment. These are not to be relied on alone; they support the higher controls. Protective equipment is the last and least effective control, and protective clothing can raise a worker's heat load.
The administrative list includes acclimatisation for new workers, work in cooler parts of the day, shorter shifts, rotation, a buddy system, supervision of anyone working alone, and trained first aiders on every shift.
Monitoring and the heat management plan
SafeWork NSW recommends a written workplace heat management plan, made with workers and their representatives. It lists four contents:
- regular monitoring of heat risk indicators, such as temperature and humidity;
- named people responsible for watching heat and humidity, especially when extreme heat is forecast;
- a trigger for formal heat stress assessments by an occupational hygienist;
- the agreed controls, when they apply and who is responsible.
Wet Bulb Globe Temperature monitoring is named as the method for formal assessments in high risk, complex or contentious situations. It needs an occupational hygienist with skills in thermal conditions. SafeWork NSW also links a heat stress calculator, the Bureau of Meteorology heatwave service and the Predicted Heat Strain app.
Training and worker rights
Information and training must reach all workers, whether full time, part time, casual, labour-hire or contractors. The listed content includes the heat plan, who watches heat and humidity, the warning signs of heat illness and what to do in an emergency.
A worker who thinks a workplace is too hot should report it to a supervisor. If it is not resolved, the next contacts are the health and safety representative, if there is one, or the supervisor's manager, and then SafeWork NSW. A trained representative can order work to stop where the risk is so serious that the usual consultation is unreasonable.
A worker with a reasonable concern about a serious risk from immediate or imminent exposure may cease or refuse the work. The worker must tell the PCBU as soon as practicable and stay available for suitable alternative work.
The regulator's hot weather warning
A SafeWork NSW media release dated April 1, 2016, was issued as temperatures above 40 degrees were forecast in parts of the state. The Executive Director said workers had died in the past while working in the heat. Outdoor workers and people in roof spaces or confined areas were named as most at risk.
The release recommends plain drinking water, at least 200 mL every 15 to 20 minutes, task rotation, and clothing rated UPF 50+. It also advises against energy or caffeinated drinks. It is a media release, not a rule.
What NIOSH adds
The US National Institute for Occupational Safety and Health defines occupational heat stress as the combination of metabolic heat, environmental heat, and clothing and protective equipment that raises heat storage in the body. Its listed risk factors include high temperature and humidity, direct sun, limited air movement, lack of acclimatisation, dehydration, certain medications and previous heat illness. NIOSH says employers should use engineering and administrative controls and train workers, and gives no numeric limit.
Sources
- SafeWork NSW, Managing extreme heat at your workplace, read October 21, 2026
- SafeWork NSW, media release Hot weather prompts SafeWork warning, April 1, 2016, read October 21, 2026
- US National Institute for Occupational Safety and Health (CDC), About heat stress, page dated March 3, 2026, read October 21, 2026