ArbNation Join free

Importing used tree machines: CE and UKCA marking, EPA nonroad engine import rules and biosecurity cleaning

A second-hand chipper or lift crosses a border under three separate regimes: product marking in Great Britain, the EPA's emission rules for engines entering the United States, and Australia's biosecurity inspection of imported machinery.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The texts are GOV.UK guidance on UKCA and CE marked products and the Supply of Machinery (Safety) Regulations 2008. They also include EPA pages on importing vehicles and engines and a page from the Australian Department of Agriculture, Fisheries and Forestry (DAFF) on imported machinery. Buyers weighing a used machine will also find the rules in second-hand machines and what regulators list.

At a glance

DestinationRule printedOffice
Great BritainMachinery placed on the market carries a UK marking or, under the 2024 amendment, a recognised CE marking; the importer takes on dutiesDepartment for Business and Trade; local trading standards
United StatesThe Clean Air Act bars importing nonroad engines and equipment that do not meet EPA emission standards, new or used; Form 3520-21 goes to CustomsEPA; US Customs and Border Protection
AustraliaThe importer is responsible for machinery arriving clean; used machinery gets a mandatory on-arrival inspectionDAFF

Great Britain: marking and the importer

The GOV.UK guide, published March 31, 2026 and last updated August 21, 2026, covers products placed on the market in Great Britain under the UKCA or CE regimes. It states that UKCA and CE markings show the manufacturer believes the product meets the requirements. Under the Product Safety and Metrology (Amendment) Regulations 2024 the UK continues to recognise the CE marking, alongside or in place of UKCA, for Great Britain. Northern Ireland follows a different guide.

An importer is anyone established in the UK who supplies a product from outside the UK for distribution, consumption or use in a commercial activity. The guide lists importer duties: identification details on the product, checks that the manufacturer completed the conformity process, technical documentation and marking, and storage and transport conditions that do not jeopardise compliance. An importer who sells under its own name, or modifies the product in a way that affects compliance, takes on the manufacturer's responsibilities. The guide names the Supply of Machinery (Safety) Regulations 2008 as the regime for machinery.

Regulation 3 of those Regulations defines placing machinery on the market as making it available in Great Britain for the first time, with a view to distribution or use, for reward or free of charge. Machinery without a UK marking is not treated as placed on the market or put into service in three cases. One is import for re-export. Another is machinery that will not be put into service in Great Britain. The third is import outside the course of a business by someone who will use it outside a business. Regulation 7 bars a responsible person from placing machinery on the market or putting it into service unless it is safe. The responsible person must also meet the applicable health and safety requirements, compile the technical file, provide operating instructions, follow a conformity assessment procedure, draw up a declaration of conformity that travels with the machinery, and affix the UK marking.

United States: EPA and Customs

EPA states that the Clean Air Act prohibits importing any motor vehicle, motor vehicle engine, nonroad engine or equipment that does not conform to EPA emission standards. The standards apply to imported heavy-duty engines, nonroad engines and recreational vehicles, whether new or used, made domestically or abroad.

EPA allows nonconforming vehicles and engines to enter in two ways. One is certification, where an Independent Commercial Importer modifies, tests and certifies the product. The other is a temporary import under a Customs bond for an EPA-approved exemption, with testing, display, repair or alteration, and nonresident competition named as purposes. EPA warns that importers must arrange an Independent Commercial Importer or get pre-approval before shipping, and that Customs or EPA can seize or export goods that arrive without either.

EPA Standard Form 3520-21 must be submitted to US Customs and Border Protection by the importer for each imported stationary, nonroad or heavy-duty highway engine, including engines built into vehicles or equipment. The form page opened through an EPA snapshot of January 19, 2021, showing the form as revised July 2020.

Australia: biosecurity

DAFF lists machinery and machinery parts used in agriculture, mining, earthmoving, construction, animal farming, timber felling, horticulture, fruit handling and food processing as subject to import conditions. It names live insects, seeds, soil, mud, clay, animal faeces, animal material and plant material such as straw, twigs, leaves, roots and bark among the biosecurity risks. DAFF states that it is the importer's responsibility to see that machinery arrives clean and free from these risks.

All machinery is subject to biosecurity control on arrival. Used machinery is any machinery or part that has touched soil, animal or plant material while being trialled, tested or used where that carries risk, and it gets a mandatory on-arrival inspection. New machinery that has been used, including field testing, falls under the used rules. Where contamination is found, options at the importer's or owner's expense include cleaning or fumigation, or export if the goods arrive heavily contaminated. DAFF adds that machinery shipped clean and dismantled, with every area open to the officer, may be released directly after inspection. New Zealand biosecurity pages did not open for this page, so no New Zealand rule is printed.

Sources