ArbNation Join free

Integrated pest management in tree care: thresholds, monitoring and action, per A300 Part 10

ANSI A300 Part 10 is the tree care standard for integrated pest management. The EPA and the University of California describe IPM as thresholds, monitoring, prevention and control, with pesticides used only after monitoring shows a need.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The A300 standard itself is sold, so what follows is the Tree Care Industry Association's own description of it, with the EPA and University of California definitions of IPM.

A300 Part 10

The Tree Care Industry Association publishes Part 10 of the ANSI A300 series as Integrated Pest Management (IPM). Its page calls the manual standards for practice and a specification writing guideline to implement IPM programs. IPM is described there as a sustainable approach that combines biological, cultural, physical and chemical tools in a way that minimizes health, environmental and economic risks.

The specification-writing guide in the standard covers:

  • how to address IPM management strategy,
  • target pests or diseases,
  • timing of monitoring,
  • a threshold for treatment,
  • evaluation and reporting,
  • IPM practices, tools and equipment, and a definition of terms.

The standard also carries an IPM specification writing flowchart and a flowchart for establishing and evaluating an IPM program as a commercial service.

The ANSI standards portal describes the A300 series as standards for tree, shrub and woody plant management, for professionals who provide or supervise it. Intended users include businesses, government agencies, property owners, property managers and utilities. The portal says the standards should be used to develop written specifications for work, and are not meant to be used as specifications themselves. It lists Part 10 as Integrated Pest Management, with its year shown as "20xx". The Approved Standards Committee A300 was approved June 28, 1991.

The EPA's four steps

The US Environmental Protection Agency calls IPM an effective and environmentally sensitive approach that relies on a combination of common-sense practices. It is not a single control method but a series of evaluations, decisions and controls. The EPA lists four steps.

The four-tiered IPM approach on the EPA page
StepWhat the EPA puts under it
Set action thresholdsThe point at which pest populations or environmental conditions show that control action must be taken. Sighting a single pest does not always mean control is needed
Monitor and identify pestsNot all insects, weeds and other organisms need control, and some are beneficial. Accurate identification keeps pesticides from being used when they are not needed, or from being the wrong kind
PreventionThe first line of control. For crops this includes rotation, pest-resistant varieties and pest-free rootstock
ControlUsed once monitoring, identification and thresholds show control is required and prevention is no longer effective. Effective, less risky controls come first, such as pheromones and trapping. Broadcast spraying of non-specific pesticides is a last resort

The University of California definition

The University of California Statewide IPM Program defines IPM as an ecosystem-based strategy that focuses on long-term prevention of pests or their damage. The techniques include biological control, habitat manipulation, changes to cultural practices and resistant varieties. Pesticides are used only after monitoring indicates they are needed according to established guidelines, with the goal of removing only the target organism.

Monitoring, for UC IPM, means checking the site to identify which pests are present, how many there are and what damage they have caused. Correct identification is key to knowing whether a pest is likely to become a problem. The program groups the tools into biological control, cultural controls, mechanical and physical controls, and chemical control.

UC IPM lists six components that are common to all IPM programs:

  1. pest identification,
  2. monitoring and assessing pest numbers and damage,
  3. guidelines for when management action is needed,
  4. preventing pest problems,
  5. using a combination of biological, cultural, physical or mechanical, and chemical management tools,
  6. assessing the effect of pest management after action is taken.

Where the descriptions line up

All three sources have a threshold for action and monitoring as steps before treatment. The TCIA page adds evaluation and reporting, and UC IPM's sixth component is the assessment after action. Neither the EPA page nor the UC IPM page is written for tree care. The EPA examples are crops, lawns and indoor spaces, and the University of California covers fields, landscapes, wildland and buildings. The TCIA description is the one that names tree care.

Other pages on the same ground are the A300 series in one volume and the plant health care primer.

Sources