Line-clearance qualifications by country: US, Canadian, UK and Australian bodies
OSHA defines the line-clearance tree trimmer by training or experience, not by a certificate. Ontario and British Columbia run a Utility Arborist trade, the UK has City & Guilds 0038 units, and Australia has unit UETDRVC003.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
The names in each country
| Country | Name, setter and what is published |
|---|---|
| United States | Line-clearance tree trimmer, defined by OSHA in 29 CFR 1910.269 as an employee who, through related training or on-the-job experience or both, is familiar with the special techniques and hazards. No certificate is named. |
| Ontario | Utility Arborist, set by Skilled Trades Ontario under the 2021 skilled trades act. Apprenticeship of about 6,000 hours: 5,340 on the job and 660 in school. A certifying exam leads to a Certificate of Qualification. |
| British Columbia | Utility Arborist, set by SkilledTradesBC. Technical training of 8 weeks over 2 years and 2,378 hours of work-based training. Level 1 standardized exam, then a Certificate of Qualification exam. |
| United Kingdom | Utility Arboriculture, City & Guilds 0038, from NPTC. Certificates of Competence at Level 3 and Level 4, listed by unit code below. |
| Australia | Control vegetation for powerline work, a national unit from Australian Industry Standards in the UET Transmission, Distribution and Rail Sector Training Package. Prerequisite units are listed below. |
United States
OSHA's 29 CFR 1910.269 defines a line-clearance tree trimmer as an employee who, through related training or on-the-job experience or both, is familiar with the special techniques and hazards involved. A crew member in on-the-job training, under the direct supervision of a line-clearance tree trimmer and shown to perform duties safely, counts as one for those duties.
The definition ties to the term "qualified employee": a person knowledgeable in the construction and operation of the electric power equipment involved, along with the associated hazards. A line-clearance tree trimmer is not a qualified employee under 1910.269 unless he or she has the training required for one under paragraph (a)(2)(ii). Under the electrical safety-related work practices standard in subpart S, a line-clearance tree trimmer is a qualified employee. Paragraphs (a)(2), (a)(3), (b), (c), (g), (k), (p) and (r) of 1910.269 apply to line-clearance tree trimming done by trimmers who are not qualified employees.
Ontario and British Columbia
Skilled Trades Ontario describes a Utility Arborist as a person who prunes, rigs or moves tree branches and woody vegetation near or able to contact electrical apparatus. The trade is non-compulsory. For that reason the Certificate of Qualification does not have to be renewed, and the holders do not appear on the Skilled Trades Ontario Public Register. Its in-school levels cover safe work practices, aerial devices, tree climbing and utility transmission line clearing.
SkilledTradesBC describes the trade as clearing vegetation from electrical equipment and structures. A worker with experience but no Canadian certification may challenge the certification exam as a Trade Qualifier. Someone with some experience who does not yet qualify for the exam may challenge a level exam to enter the program at the right level.
United Kingdom
The NPTC scheme page says utility arboriculture activities need to be carried out legally, safely and competently. City & Guilds qualifications assess both underpinning knowledge and practical skills.
- 0038-30: Level 3, Basic Electrical Knowledge
- 0038-31: Level 3, Tree species Recognition, Growth Characteristics and Associated Hazards
- 0038-32: Level 3, Ground-based Pruning
- 0038-33: Level 3, Aerial Pruning
- 0038-34: Level 3, Assisted Tree Felling
- 0038-35: Level 3, Use of Chainsaw from a Mobile Elevating Work Platform (MEWP)
- 0038-40: Level 4, Surveyor
- 0038-41: Level 4, ETR 132 Resilience Arboricultural Surveyor
Australia
UETDRVC003 Control vegetation for powerline work, Release 1, covers vegetation control in the vicinity of live electrical apparatus by line workers using plant, tools and equipment. An existing Certificate III ESI qualification or equivalent meets the prerequisite unit requirements.
- AHCMOM213 Operate and maintain chainsaws
- UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
- UETDREL001 Apply environmental requirements
- UETDREL004 Operate plant and equipment in the vicinity of live electrical apparatus
- UETDREL005 Work safely in the vicinity of live electrical apparatus
The unit says its skills may require a licence or registration to practice in the workplace. Other conditions may apply under state and territory licensing requirements, which must be confirmed before starting the unit.
Sources
- U.S. Department of Labor, OSHA, 29 CFR 1910.269 Electric power generation, transmission, and distribution, via the eCFR, read October 15, 2026
- Skilled Trades Ontario, Utility Arborist trade information, read October 15, 2026
- SkilledTradesBC, Utility Arborist, read October 15, 2026
- Australian Industry Standards, UETDRVC003 Control vegetation for powerline work, Release 1, generated December 6, 2022, read October 15, 2026
- NPTC by City & Guilds, Utility Arboriculture qualification scheme, read October 15, 2026