Wood and log species ID: what the Forest Products Laboratory and extension say
Wood can be told apart by end grain, pores, rays, colour and smell, but only so far. The Wood Handbook, a Michigan State key and a Mississippi State page cover the features and where identification stops being reliable.
Checked against the sources at the bottom of this page on October 9, 2026. Rules, fees and pay change: the source has the last word.
It does not identify any piece of wood or log, and it is not a key. Firewood is a separate subject: firewood species and seasoning covers which woods are sold and how they are seasoned.
How far identification can go
The Wood Handbook (Forest Products Laboratory, FPL-GTR-282, 2021) defines wood identification as recognizing characteristic cell patterns and wood features. In general it is accurate only to the generic level. Woods of different species in one genus often have different properties, so mixing them causes problems in making and using wood. Lumber graders, furniture workers, people in the industry and hobbyists often identify wood without laboratory tools, using colour, odor, grain pattern, density and hardness. Accuracy depends on the person's experience and the quality of the sample: an atypical, decayed or small piece is often identified wrongly. A 10 to 20 times hand lens greatly improves accuracy. Some foresters and wood technologists with a hand lens and sharp knife can accurately identify lumber in the field by looking at a cut on the end-grain surface.
The handbook section also lists the techniques researchers use besides the hand lens: computer vision, light microscopy, near-infrared and mass spectroscopy, and DNA methods. The best result comes from applying them together in a sensible sequence. Mississippi State University Extension puts the level needed at anything from hardwood or softwood only, to white oak against red oak, to the individual species. Depending on the level, it may take a glance or several hours and a microscope.
Wood features
| Feature | Description | Examples they give |
|---|---|---|
| Softwood or hardwood | Michigan State (E-746, 1986) traces the names to needle-bearing and broad-leaved trees, with little to do with hardness; hardwoods have pores and softwoods do not | Pines, spruces and cedars against maples and oaks |
| Diffuse-porous | The Wood Handbook describes vessels that do not change markedly in size from earlywood to latewood, or change only gradually | Maple, birch, aspen and cottonwood, yellow-poplar |
| Ring-porous | The Wood Handbook describes an abrupt change, with large earlywood vessels and denser latewood | Hackberry, white ash, shagbark hickory, northern red oak; Michigan State adds elm |
| Semi-ring-porous | The Wood Handbook puts vessel size and pattern between the two | Black walnut, in the temperate zone |
| Softwood ring transition | The Wood Handbook has a few softwoods changing gradually from earlywood to latewood and others changing abruptly | Gradual: western redcedar, northern white-cedar, spruce, true fir. Abrupt: southern yellow pine, larch, Douglas-fir, baldcypress, redwood |
| Resin ducts | Michigan State notes tiny openings along the ring, frequently visible in some softwoods and far fewer than hardwood pores | Pines; large in sugar pine |
| Rays | Michigan State calls rays distinctive in oaks and beech, where they are quite broad, and visible on the radial surface in maple | Oak, beech, maple |
Colour, odor and sapwood
Michigan State names three difficulties with colour: it varies considerably within one kind of wood, wood is often stained, and it changes with light. No other American wood has the colour of eastern red cedar. Odor helps with some woods, such as Douglas-fir, basswood and the cedars. An odor can only be learned by comparing with a known sample, and an old-cut board may lose it. Only heartwood has characteristic colour and odor, since sapwood has no distinct colour or odor. Sapwood thickness varies with the species: about 2 inches on ponderosa pine and one-half inch on northern white cedar. In general, softwoods are harder to tell apart than hardwoods. Printed grain, overlays and plastic laminates can fool a reader who is not familiar with wood.
About the 1986 key
The Michigan State bulletin was written by Eldon Behr of the Department of Forestry and reprinted in August 1986. The university archive labels the copy as an archive copy not to be used as a source of recommendations, so only the plain wood features above come from it. Its key covers only woods hobbyists, builders and furniture makers commonly meet and only three imported woods. Wood identification takes time and skill to learn. Mississippi State points to a University of Tennessee extension pamphlet on Tennessee woods and to US Forest Service books that describe the wood of each species.
Sources
- USDA Forest Service, Forest Products Laboratory, Wood Handbook (FPL-GTR-282), 2021, chapter 3 (growth rings and wood identification), read October 9, 2026
- Michigan State University Extension, Identifying Wood: a Guide and a Key (E-746, Behr), reprinted August 1986, archive copy, read October 9, 2026
- Mississippi State University Extension, Wood Identification, read October 9, 2026