ArbNation Join free

Lone-worker alarm devices: what BS 8484, HSE, WorkSafeBC and CCOHS say about devices and check-ins

The HSE lists alarm devices among the ways to monitor lone workers. BS 8484:2022 is the British code of practice for lone worker services, and WorkSafeBC and CCOHS describe check-in procedures.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

The HSE on devices and monitoring

The HSE leaflet Protecting lone workers (INDG73, revision 4, March 2020) says technology advances mean a wide range of systems and devices are available to employers to monitor lone workers. A monitoring system needs to be embedded in the organisation so workers understand it, and clear procedures are required because effective means of communication are needed.

The leaflet says monitoring and keeping in touch may include:

  • supervisors periodically visiting and observing people working alone;
  • pre-agreed intervals of regular contact between the lone worker and the employer, using phones, radios or email, bearing in mind the worker's understanding of English;
  • other devices that raise the alarm in an emergency, operated manually or automatically;
  • a system to confirm that a lone worker has returned to base or home once the work is done.

Elsewhere the leaflet lists work equipment as one of the things to consider: devices that raise the alarm in an emergency and are operated manually or automatically, such as phones or radios. It also asks whether a worker has adequate and reliable means of communication and a way to call for help.

WorkSafeBC on working alone

WorkSafeBC states that employers must have procedures in place for the well-being of workers who work alone or in isolation. Lone workers must be able to get assistance if they are injured or there is an emergency. The topic page points to the handbook Working Alone: A Handbook for Small Business (June 2012), which covers how to identify and minimize hazards and how to check on workers' well-being regularly. The topic page names no device type.

CCOHS on check-in procedures and communication

The CCOHS OSH Answers page on working alone counts chainsaws among hazardous equipment that makes working alone a higher-risk activity. It says a check-in procedure should be in place, deciding whether a verbal or real-time check-in such as texting is adequate or whether the worker must be accounted for by a visual check.

For most lone workers the telephone is the main contact. Where cell phone service is unreliable, the alternatives named are cameras, automated warning or duress devices, GPS, two-way radio, site visits and satellite technology. The example procedure has a daily work plan, a main contact plus a backup, an agreed check-in schedule, a possible written log of contact, a code word for help and an emergency plan if a check-in is missed.

BS 8484 in the BSI catalogue

BSI lists BS 8484:2022, Provision of lone worker services. Code of practice, as current, published 31 March 2022. Its scope is recommendations for lone worker services where a customer's risk profile identifies the need. Such services consist of a lone worker device or a lone worker application, monitoring, training, management information and response options. BSI names suppliers of services, devices and apps, customers of those services and police services as its users.

The earlier edition, BS 8484:2016, shows as withdrawn on 7 November 2024. BSI describes the 2016 edition as applying to security companies, agencies providing lone worker services and procurers, and as part of a wider lone worker protection strategy.

Status of the HSE guidance

The HSE leaflet says following its guidance is not compulsory, unless specifically stated, and that anyone who does follow it will normally be doing enough to comply with the law.

Sources