Machine standards timeline: editions and revision dates
Publication, amendment and confirmation dates for six machine standards: hedge trimmers, forestry safety, roll-over, falling-object and thrown-object protection, and wood chippers. Every date comes from a publisher or national catalogue.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. Dates are those in the catalogue record of each standards body. A standards body can list a different date for the same text, and where it does, the row says whose date it is.
Standards in date order
| Standard | Edition dates | Status in the record |
|---|---|---|
| ISO 3449:2005 | Published September 12, 2005. It replaced ISO 3449:1992. | Confirmed September 7, 2022 (stage 90.93). Two revision projects are marked abandoned. |
| ISO 8082-1:2009 | Published July 2009. | Listed as current by AFNOR. |
| IEC 60745-2-15 Ed 2.1 | Consolidated version dated 2009-06. It combines the second edition (2006) and amendment 1 (2009). | Edition 2.1 is the version in the VDE preview. |
| ISO 11850:2011 | Published November 15, 2011. Amendment 1 in 2016, amendment 2 in 2022. It replaced the 2003 edition. | Stage 90.92, standard to be revised, from December 20, 2024. A committee draft is in development. |
| EN 13525:2020 | Valid from May 4, 2020, in the Estonian standards board record. The earlier 2005 edition with amendment A2 of 2009 is listed with the date January 6, 2010. | Current in the EVS catalogue. |
| ISO 11839:2021 | Published February 19, 2021. It replaced ISO 11839:2010 and its 2012 corrigendum. | Confirmed September 14, 2026 (stage 90.93). |
Scope of each standard
ISO 3449 covers falling-object protective structures for ride-on earth-moving machines. The roll-over standard, ISO 8082-1, covers roll-over protective structures for forwarders, skidders, feller bunchers, processors, harvesters and log loaders. The general standard, ISO 11850, sets general safety requirements for self-propelled forestry machines. The thrown-object standard, ISO 11839, covers thrown object guards on forestry machinery.
IEC 60745-2-15 applies to hand-held hedge trimmers for one operator, with one or more linear reciprocating cutter blades. It does not apply to hedge trimmers with a rotating blade. EN 13525:2020 covers wood chippers that are manually loaded through a horizontal or near horizontal infeed chute and used when stationary.
The EN 13525:2020 record carries a note on noise. The standard's noise test code does not comply with the outdoor noise directive 2000/14/EC.
The outdoor noise regulations
The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001 are Statutory Instrument 2001 No. 1701, made on 3 May 2001. Regulations 1, 2 and 14 came into force on 4 June 2001 and the rest on 3 July 2001. The permissible sound power levels in Schedule 3 have a Stage I that applies from 3 January 2002 and a Stage II from 3 January 2006.
Hedge trimmers and shredders or chippers are in the Schedule 2 list of equipment subject to noise marking only. For the chipper side, see the guide to chipper and grinder noise. Older dates for tree work standards are in the tree work standards timeline.
Sources
- IEC, IEC 60745-2-15 Edition 2.1 (2009-06), hedge trimmers, preview PDF from VDE Verlag, read October 21, 2026
- ISO, ISO 11850:2011 Machinery for forestry, General safety requirements, catalogue record on the Albanian DPS standards page, read October 21, 2026
- ISME Montenegro, ISO 11839:2021 Machinery for forestry, Thrown object guard, catalogue record, read October 21, 2026
- ISME Montenegro, ISO 3449:2005 Earth-moving machinery, Falling-object protective structures, catalogue record, read October 21, 2026
- AFNOR Editions, ISO 8082-1:2009 Self-propelled machinery for forestry, ROPS laboratory tests, Part 1, read October 21, 2026
- Eesti Standardimis- ja Akrediteerimiskeskus (EVS), EVS-EN 13525:2020 Forestry machinery, Wood chippers, Safety, catalogue record, read October 21, 2026
- legislation.gov.uk, The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001 (SI 2001/1701), as made, read October 21, 2026