ArbNation Join free

Log classes for mills: sawlog, pulpwood and veneer grades from Teagasc, CSO and Oregon

Ireland sorts conifer logs by top diameter and length: sawlog from 20 cm, palletwood 14 to 19 cm, pulpwood 7 to 13 cm. Oregon grades logs by the product they suit, from peeler to utility.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

Teagasc and the Central Statistics Office (CSO) describe Irish conifer log classes by diameter and length. The Oregon Department of Forestry (ODF) describes grades by the lumber or veneer a log suits.

Irish log classes

Teagasc says conifer logs from thinning and clearfelling are cut into assortments by diameter and length. The mix depends on the size, age and quality of the trees. A young forest at first thinning yields more pulpwood, and older thinned forests yield larger logs and more sawlog. The CSO prints definitions for its statutory Roundwood Removals Survey, which covers privately owned forests.

Log classes in Ireland
ClassTeagascCSO
SawlogSmall end 20 cm or more; standard length 4.9 mLarge sawlog: top 20 cm or more, 3.7 to 7.3 m
PalletwoodSmall end 14 cm or more; 2.5 to 3.7 mSmall sawlog: top 14 to 19 cm, 2.0 to 3.6 m
Stakewood7 to 13 cm; buyers prefer 3.4 to 3.7 mTop 7 to 13 cm, 1.5 to 1.9 m
PulpwoodSmall end 7 to 13 cm minimum; 3 mTop 7 to 13 cm, around 3 m

The two bodies print different lengths for palletwood and stakewood, and Teagasc adds that sawlog specifications can vary. Teagasc gives the uses: sawlog for construction sawn timber, palletwood for pallets, packaging, garden furniture and fencing, stakewood for fencing stakes and straining posts. The CSO ties pulpwood to pulp, door panels, particle board, oriented strand board (OSB) and medium-density fibreboard (MDF). Teagasc names firewood and biomass chip as outlets for timber that does not suit higher-value markets. The CSO survey counts fuelwood and woodchip as categories.

Oregon grade codes

ODF explains the grade codes in its log price report as brief descriptions of what a log suits. It adds three cautions:

  • Grade coding is usually specific to the species, so a 2S in Douglas-fir is not a 2S in Western Redcedar.
  • A grade may only imply that a log suits certain products, and a manufacturer may do otherwise. A veneer plant may use a 2S Douglas-fir log for veneer.
  • The 1P, 2P and 3P codes are Douglas-fir designations. Hemlock has just Peeler and spruce just Select.
Oregon Department of Forestry log grades
GradeDescription
1P, 2PNo. 1 and No. 2 Peeler: plywood veneers, clear and uniform in color, face stock
3PNo. 3 Peeler: veneer center core, cross core and backs
SMSpecial Mill: logs suited to Select Merchantable and better lumber, or to veneer center core, cross core and backs; all species except Western Redcedar
2S, 3S, 4S Douglas-firSawmill logs suited to Construction and Better, Standard and Better, and just under Construction and Better lumber grades
1S to 6S PineSawmill pine. 1S to 3S are old growth logs for D Select and Better or No. 2 Shop and Better. 4S suits No. 2 Common and Better. 5S and 6S are 6 inch and 5 inch logs for No. 3 Common and Better
SCSpecial Peelable Cull: below peeler or sawlog minimums but suited to rotary cutting of Firm White Speck and Better veneer
UtilityBelow peeler or sawlog minimums but suited to firm usable chips
Camp RunLog production of the species or group being logged that is better than cull
PulpWood for paper fiber, usually too small, of poor quality or the wrong species for lumber or plywood
WormyWormy cedar logs that miss 4S because of excessive worm holes

Measure and pond value

ODF says logs and lumber are usually measured in board feet, expressed per thousand board feet (MBF). Weight in tons of 2,000 pounds is used for small, low-quality logs where each piece is not measured and graded. The department defines pond value as the amount a mill pays for a log delivered to the mill and scaled, and stumpage value as the worth of a log standing in the woods.

Sources