ArbNation Join free

Musculoskeletal disorders in tree work: SafeWork NSW, NIOSH and WorkSafe NZ

SafeWork NSW lists musculoskeletal disorders among the major risks of tree work, and names five risk factors for hazardous manual tasks. NIOSH and WorkSafe New Zealand define the disorders and list their causes.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. It is not medical advice and gives no treatment. Only SafeWork NSW names tree work. NIOSH and WorkSafe NZ write for all workplaces.

Tree work in the SafeWork NSW hazard list

SafeWork NSW's tree work page counts lopping, pruning, trimming, repairing, maintaining, transplanting and removing trees as tree work. It calls tree work a job with major risks: falls from heights, being struck by falling objects, working around power lines, musculoskeletal disorders, exposure to noise, working with equipment and sun exposure. SafeWork NSW links a code of practice for tree works and a guide to managing the risks of tree trimming and removal.

Hazardous manual tasks

SafeWork NSW defines manual tasks as using the body to lift, lower, push, pull, carry, move, hold or restrain any person, animal or thing. A manual task becomes hazardous when one or more of these is present:

  • repetitive or sustained force;
  • high or sudden force;
  • repetitive movement;
  • sustained or awkward posture;
  • vibration.

Hazardous manual tasks are one of the main causes of musculoskeletal disorders in NSW, though not the only cause. The examples it gives are carpal tunnel syndrome, tendonitis, muscle and tendon strain, rotator cuff injuries, and ruptured or herniated discs in the spine.

How SafeWork NSW defines the risk factors
FactorDefinition or indicator
RepetitiveA movement or force performed more than twice a minute.
Sustained posturePart or all of the body held in the same position for more than 30 seconds at a time.
Awkward postureAny body part in an uncomfortable or unnatural position, such as an unbalanced posture, an extreme joint angle, or bending and twisting.
High forceLarge loads relative to the body part doing the work. Indicators are a worker calling the task physically demanding, needing help, needing a stronger person or two people, or using two hands for a normally one-handed task.
Sudden forceA rapid rise or fall in muscular effort, such as a jarring, jerky or unexpected movement.
VibrationWhole-body or hand-arm vibration. Risk rises with the length of exposure and with high amplitude. Examples are hand powered tools and mobile plant.

Where several risk factors are present and interact, SafeWork NSW says the risk of a disorder increases markedly. Under section 60 of the Work Health and Safety Regulation 2025, an employer must manage the risk of a musculoskeletal disorder from a hazardous manual task. That means eliminating the risk so far as reasonably practicable, and otherwise minimising it through the hierarchy of controls. SafeWork NSW calls "how to lift" training not an effective way to protect workers from harm, and not a requirement of the NSW legislation.

NIOSH: risk factors and definition

NIOSH describes musculoskeletal disorders as disorders of the muscles, nerves, tendons, ligaments, joints, cartilage or spinal discs. They range from mild to intense, from occasional to chronic pain, and can be a leading indicator of disability. Six work conditions cause or worsen them. These are lifting, pushing, pulling or carrying many or irregularly shaped objects, awkward or unnatural postures, working in cold, vibration from machinery and tools, higher intensity, frequency or duration of activity, and psychosocial stress. Personal factors include age, sex and body mass index. NIOSH defines ergonomics as the design of work tasks to best suit the capabilities of workers.

WorkSafe NZ: definitions

WorkSafe New Zealand defines work-related musculoskeletal disorders as injuries and conditions affecting the muscles, ligaments, bones, tendons, blood vessels and nerves, which occur when work demands lead or contribute to pain, discomfort or injury. Multiple factors usually cause them, and the risk factors often work in combination. Both manual and sedentary work carry risk factors, and non-work factors may add to injury risk.

The work risk factors it lists are forces and loads, task duration and repetition, workplace layout, vibration, awkward postures (it gives overhead reach, stooping and kneeling as examples), work organisation, the environment and individual factors. It also lists psychosocial factors such as job demands and workload. Most disorders develop over time, though they can also come on suddenly. They may begin as mild aches and pains and grow into a serious condition, with loss of strength, sensation or dexterity. WorkSafe NZ's preferred term is work-related musculoskeletal disorders. In New Zealand the same conditions have been called sprains and strains, repetitive strain injury and occupational overuse syndrome.

The three offices

In New South Wales the regulator is SafeWork NSW, whose hazardous manual tasks page carries the code of practice. In New Zealand the regulator is WorkSafe New Zealand. In the United States the research body is NIOSH. Other countries are in safety rules by country.

Sources