ArbNation Join free

Nursery stock types and size terms: balled-and-burlapped, container, bare-root, caliper and height

The American nursery stock standard defines how trees are dug, sold and measured: caliper at 6 or 12 inches, height from the soil line, and container classes by volume. BS 3936-1 is the British counterpart.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

The American Standard for Nursery Stock exists to give buyers and sellers a common terminology. AmericanHort publishes it and says it covers measuring plants, stating their size, and the link between height and caliper. It also covers whether a root ball or container is big enough for a given plant. The standard is a communication tool and gives no assurance of the health or quality of the stock. The terms below are taken from the 2004 text, ANSI Z60.1-2004, as the Indiana Department of Natural Resources hosts it.

AmericanHort records the later history. A revision from January 2005 to August 2013 produced ANSI Z60.1, approved in April 2014. A further revision between January 2024 and April 2025 produced ANSI Z60.2, approved April 12, 2025. The 2004 figures below may differ from the current edition.

How the stock is dug and sold

Production and sale terms in ANSI Z60.1-2004
TermMeaning in the standard
Bare rootA tree grown in the ground without containers or fabric bags. After harvest the soil is removed from the roots. The standard sets a minimum root spread by caliper: 12 inches for a 1/2 inch tree, 28 inches for 2 inches, 38 inches for 3 inches.
Balled and burlappedA field-grown tree harvested with its ball of earth intact. Burlap or other material must be biodegradable and cover the whole ball. A ball-supporting device such as a wire basket must hold the ball firm and rigid.
Container grownSold by plant size and by container class together. A specification with only the container class is incomplete.
Fabric bag grownGrown in an in-ground fabric bag. The specification gives caliper and a minimum bag size.
Processed balledA plant dug bare root while dormant, with growing medium formed around the roots into a ball by machine or by hand.
Field pottedA field-grown plant dug with its ball intact and placed in a container instead of burlap.
CollectedA plant taken from unmanaged land. Minimum ball sizes are those of the next larger nursery-grown size. A collected plant may count as nursery grown after two growing seasons in the nursery row.
Plantation grownA plant set in fertile, friable soil with a minimum of after-care. It takes the ball size of the next larger nursery-grown size.

Caliper and height

ANSI Z60.1-2004 takes caliper on the trunk six inches above the ground, up to and including a four-inch caliper. Above four inches it is taken 12 inches above the ground. Height is measured from ground level for field-grown stock and from the soil line for container stock, which should sit at or near the top of the root flare.

Trunks are seldom round. The standard calls a diameter tape the most accurate tool. With a slot or pincer caliper, the reading is the average of the smallest and largest measurements.

The unit depends on tree type and production method. For Type 1 and Type 2 field-grown shade trees the measure is caliper in inches, and caliper takes precedence over height if both are given. Bare root and container shade trees are sized by height through the 7 to 8 foot interval, then by caliper. Small and flowering Type 3 and Type 4 trees are sized by height through 5 to 6 feet, then by caliper. Trees in in-ground fabric bags are sized by caliper.

A size designation states only the minimum of its interval. A 2.5 inch caliper Type 1 shade tree means the 2.5 to 3 inch interval. A 5 foot Type 4 spreading tree means the 5 to 6 foot interval.

Height and caliper for Type 1 shade trees, ANSI Z60.1-2004, Table 1 (selected rows)
CaliperAverage height rangeTypical maximum height
1/2 in.4 to 5 ft.6 ft.
3/4 in.6 to 8 ft.10 ft.
1 in.8 to 10 ft.11 ft.
1 1/4 in.8 to 10 ft.12 ft.
1 1/2 in.10 to 12 ft.14 ft.

Root balls and containers

For balled trees the standard measures ball depth from the top of the ball, which begins at the root flare. Soil above the flare is left out of the measurement. Balls under 20 inches across should be at least 65 percent as deep as they are wide. Balls of 20 inches and up should be at least 60 percent as deep. The trunk should sit in the centre of the ball, with a tolerance of 10 percent of the diameter.

Container classes are written with a hash sign and run by volume. Class #1 holds 152 to 251 cubic inches, #5 holds 785 to 1,242, #15 holds 2,768 to 3,696, and #25 holds 5,775 to 6,861. A 24-inch wooden box is the equivalent of class #25. Small plant classes carry an SP prefix, and the standard puts the 4-inch or quart pot at #SP4, 51 to 63 cubic inches.

The British standard

BSI Knowledge lists BS 3936-1:1992, Nursery stock, Specification for trees and shrubs, published January 31, 1992, and marks it current. It covers trees and shrubs, including conifers and woody climbing plants, that suit transplanting as ornamental or amenity plants. It is not aimed at timber production and does not apply to roses, poplars or willows.

BSI describes a tree as a woody perennial with a distinct stem or stems, and a shrub as usually shorter, with several stems or side branches and a bushy habit. The standard standardises dimensions, containers and labelling. It sets dimensions for seedlings, cuttings, transplants, whips, feathered trees and standard trees. The British girth grades for standard trees have their own page.

Sources