Wildland fire chain saw courses: S-212, S-112 and the FAL3 faller position
S-212 Wildland Fire Chain Saws is a 24 to 36 hour course listed by fire training academies in Illinois and California. Texas A&M Forest Service names S-112 and accepts S-212 only for courses taken before 2026.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
The named codes and training bodies are described here as published. It is not training and does not teach the work.
S-212 as academies list it
The Illinois Fire Service Institute syllabus, dated February 2004, titles the course S-212 Wildland Fire Chain Saws and gives a duration of 24 hours. The Academy listing in California, for a July 2020 session at Hollister, gives 24 to 36 hours, with variable college units from Cabrillo College. The two pages differ on length.
Both pages describe the same course. It introduces the function, maintenance and use of internal combustion chain saws and their tactical wildland fire use. Field exercises support entry level training for firefighters with little or no chain saw experience, in surroundings like fireline conditions.
| Item | Illinois Fire Service Institute | The Academy, California |
|---|---|---|
| Length | 24 hours | 24 to 36 hours |
| Prerequisite | Qualified Firefighter Type 2 (FFT2), L-180 Human Factors, S-130, S-190 and current basic first aid and CPR | Qualified Firefighter Type 2 (FFT2) |
| Format | Instructor-led, presented at the local level | Held at a fire department, with field exercises |
The Illinois course outline
The syllabus lists six units: introduction, safety requirements, chain saw maintenance and operation, chain saw tasks and techniques, fireline construction and mopup, and a field practicum. Quizzes cover units 1 through 4. A field evaluator or coach grades the field exercises on the S-212 Field Evaluation Form, discusses the grade with the student, who signs it. Students are graded on the classroom and field parts together for pass or fail.
The schedule runs three days. The first covers the introduction, safety requirements and maintenance and operation. The second covers tasks and techniques, fireline construction and the start of the practicum. The third is practicum. The institute requires 100 percent attendance for certification courses. Make-up of up to 20 percent of scheduled time is allowed, and the student must make up the specific content missed.
S-112 and the FAL3 position
A New York State fire academy page, titled for S-212 but describing S-112 Introduction to Chainsaw Operations (Blended), 2025, says the course prepares students for the Basic Faller (FAL3) position under the NWCG Standards for Wildland Fire Chainsaw Operations, PMS-212. It has an online part and an instructor-led part. No prerequisite is listed. Passing the online knowledge assessment takes 70 percent or better, and there is no final exam. Students are also assessed on the NWCG skill assessment for FAL3, and the field part runs three days outdoors.
What Texas A&M Forest Service requires
The Texas A&M Forest Service chain saw operations procedure, revised June 8, 2026, ties the courses to faller positions. Emergency response personnel must complete NWCG S-112. Faller trainees must have taken S-112, or S-212 before 2026. The general-purpose route also names S-112, or S-212 before 2026.
- FAL3: a trainee must be qualified as a Firefighter Type 2 before starting a FAL3 position task book. The final evaluator must be a qualified Intermediate Faller (FAL2) or higher.
- Refresher: fallers complete the Wildland Fire Chain Saws Annual Refresher, RT-212, every two years.
- Work capacity: a Moderate Work Capacity Test for Texas incidents and Arduous for incidents outside Texas.
- General-purpose chain saw operators can never operate a saw on an operation counted as Emergency Response.
The procedure calls FAL2 the Advanced Faller in one definition and the Intermediate Faller in others, with FAL1 as Advanced.
Sources
- Illinois Fire Service Institute, S-212 Wildland Fire Chain Saws course syllabus (program of instruction, February 2004), read October 15, 2026
- The Academy (California), S-212 Wildland Chainsaws event listing, July 26 to 28, 2020, read October 15, 2026
- Texas A&M Forest Service, Chainsaw operations procedure, revised June 8, 2026, read October 15, 2026
- New York State, NY Wildfire and Incident Management Academy, S-112 Introduction to Chainsaw Operations (Blended) 2025, read October 15, 2026