AS/NZS 1891 parts 1, 2 and 4: harness, lifeline and fall-arrest standards with edition and status
Standards Australia lists AS/NZS 1891.1 as a 2020 edition, 1891.4 as a 2025 edition and 1891.2 as a 2001 edition pending revision. The SafeWork NSW tree works code of March 2026 cites the first two.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
The register
Standards Australia sells the series through its store and gives each part a title, publication date and status.
| Designation, date and status | Title and scope in the publisher's words |
|---|---|
| AS/NZS 1891.1:2020 Published 28 August 2020 Current | Personal equipment for work at height, Part 1: Manufacturing requirements for full body combination and lower body harnesses. Requirements for the materials, design, manufacture, testing and marking of full-body, combination and lower-body harnesses designed for working at height |
| AS/NZS 1891.2:2001 Published 20 March 2001 Pending Revision | Industrial fall-arrest systems and devices, Part 2: Horizontal lifeline and rail systems. Design and performance requirements for horizontal lifeline and rail systems and their component hardware, using either rigid rails or flexible lines, with test methods in appendices |
| AS/NZS 1891.4:2025 Published 19 September 2025 Current | Personal equipment for work at height, Part 4: Selection, use and maintenance. Requirements and recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices |
| AS/NZS 1891.4:2009 Published 2 November 2009 Superseded | Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance. Selection, safe use and maintenance of systems based on safety harnesses, horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings |
Editions and drafts
The series changed its name between editions. The 2001 and 2009 editions carry the title Industrial fall-arrest systems and devices. The 2020 and 2025 editions are titled Personal equipment for work at height.
Standards Australia lists AS/NZS 1891.1:2020 as the replacement for the 2007 edition, which had two amendments, dated 31 October 2007 and 19 May 2008. For part 4, the store shows the 2009 edition and its Amendment 1 of 4 June 2021 as superseded by the 2025 edition. A draft, DR AS/NZS 1891.4:2024, is listed beside it. Part 2 lists a Supplement 1:2001 and a draft numbered DR 00282.
The Building CodeHub run by the New Zealand government records the 2009 edition of part 4 as valid from 1 November 2009. It names Standards New Zealand as the information provider and lists the formats as PDF and hard copy.
Where to read them
The Standards Australia store lists the 2025 edition of part 4 in hard copy and web reader formats. It groups part 4 in its Work at Height Set and its Outdoor industries set, and parts 1 and 2 in its Outdoor industries set. The sets are bundles of standards sold together.
Where a tree work code cites them
The SafeWork NSW Tree works code of practice commenced on 27 March 2026 and replaced the 1998 Amenity Tree Industry Code of practice. Under climbing equipment it lists AS/NZS 1891.1:2020, AS/NZS 1891.4:2025 and AS/NZS ISO 22846.1:2020, the last on rope access systems.
The same code names parts 1 and 4 again under harnesses. Inspections of a work positioning harness must be carried out at least annually, and harnesses should be used and maintained to the maker's recommendations. For people working in a bucket, the code names a fall-arrest harness complying with AS/NZS 1891.4:2025. It may also refer to withdrawn or superseded standards.
Sources
- Standards Australia store, AS/NZS 1891.4:2025 product page, read October 15, 2026
- Standards Australia store, AS/NZS 1891.1:2020 product page, read October 15, 2026
- Standards Australia store, AS/NZS 1891.2:2001 product page, read October 15, 2026
- SafeWork NSW, Tree works code of practice, March 2026, read October 15, 2026
- Building CodeHub (New Zealand), AS/NZS 1891.4:2009 resource page, read October 15, 2026