ArbNation Join free

Pesticide and herbicide handlers: label PPE statements, the EPA Worker Protection Standard and Health Canada

In the United States, the PPE a pesticide handler wears comes from the product label. 40 CFR part 170 makes the employer provide it, and 40 CFR part 156 sets the minimum label statements. Health Canada also treats the label as the binding source.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

Where the PPE requirement starts

Under 40 CFR 170.507, any person who performs handler activities with a pesticide product must use the clothing and personal protective equipment that the product labeling specifies. The handler employer must provide that equipment, keep it clean and keep it in proper operating condition. The label sets the item. The rule defines how each label term is read.

The rule defines a handler as a person employed by an agricultural employer or a commercial pesticide handler employer. Handlers mix, load or apply pesticides, dispose of them, handle opened containers, work as flaggers, repair equipment that may hold residues, or assist with an application. Self-employed people count.

Where the Worker Protection Standard applies

The Worker Protection Standard covers pesticides used in the production of agricultural plants on an agricultural establishment. Section 170.305 defines that as a farm, forest operation or nursery engaged in outdoor or enclosed space production of agricultural plants. EPA says the standard protects workers and handlers on farms, forests, nurseries and greenhouses.

Section 170.303(b) lists what the part does not apply to. Two entries matter for tree care. One is plants other than agricultural plants, which may include permanent ornamental plantings: ornamental gardens, parks, public or private landscaping, lawns or other grounds intended only for aesthetic purposes or climatic modification. The other is use not directly related to the production of agricultural plants, including structural pest control and control of vegetation in non-crop areas. Where a label's own directions are inconsistent with the part, users follow the label.

The label can still carry PPE for a use the part does not cover. Section 156.212(b)(3) lets a registrant for such uses adopt the same PPE, or keep the existing requirements, and the labeling must indicate which PPE applies to which use.

What the label statements must contain

Subpart K of 40 CFR part 156 prescribes statements on the label. Each covered product carries the reference statement "Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170." Handler PPE statements go in the Hazards to Humans section. Section 156.212 sets minimum PPE by toxicity category of the end-use product, route by route.

Minimum handler PPE by toxicity category, 40 CFR 156.212(e), Table 1
CategorySkin (dermal toxicity or irritation)Inhalation and eyes
ICoveralls over long-sleeved shirt and long pants; socks; chemical-resistant footwear; chemical-resistant glovesRespiratory protection device; protective eyewear
IICoveralls over short-sleeved shirt and short pants; socks; chemical-resistant footwear; chemical-resistant glovesRespiratory protection device; protective eyewear
IIILong-sleeved shirt and long pants; socks; shoes; chemical-resistant glovesNo minimum
IVLong-sleeved shirt and long pants; socks; shoes; no minimum for glovesNo minimum

In categories with no minimum, EPA may still require PPE for a specific product. For gloves, the rule sets the label wording by formulation: "waterproof gloves" for solids, and "chemical-resistant (such as nitrile or butyl) gloves" for liquids other than water. For water-based liquids the label may use "waterproof gloves" instead.

How the PPE terms are defined

Section 170.507(b) says what each label word means. Chemical-resistant PPE allows no measurable movement of the pesticide through the material during use. A chemical-resistant suit or coveralls must be loose-fitting and cover the whole body except head, hands and feet. Protective eyewear is goggles, a face shield, safety glasses with front, brow and temple protection, or a full-face respirator. Chemical-resistant headgear is a hood or a wide-brimmed hat.

Gloves made of leather, cotton or other absorbent material may not be worn for handler activities unless the label lists them as acceptable. Separable glove liners are allowed under chemical-resistant gloves unless the label prohibits them, and they are discarded after no more than 10 hours of use or within 24 hours of first being put on, whichever comes first. Shirts, pants, shoes and socks are work clothing, not PPE, though the label can still require them.

Respirators, inspection and cleaning

When the label requires a respirator, the handler employer must provide fit testing, training and a medical evaluation under 29 CFR 1910.134 before the handler works, and keep the records for two years. Employers must see that PPE is used according to the manufacturer's instructions and inspected for leaks, holes, tears or worn places before each day of use. Damaged PPE is repaired or discarded. PPE is cleaned before each day of reuse and washed separately from other laundry. Coveralls drenched or heavily contaminated with a pesticide whose label signal word is DANGER or WARNING must not be reused.

Application exclusion zone

EPA's page describes the application exclusion zone as the area around outdoor application equipment where people are prohibited during application. It has a 25-foot or 100-foot radius, depending on the application type and droplet size, and can extend off the establishment. Handlers suspend the application when people enter it. EPA says a September 2024 final rule restored the zone under the 2015 standard.

Canada

Health Canada's pesticide FAQ tells users to follow the label, which it calls a legal document, and to use any protective clothing, gloves or other equipment the label specifies. The page on spray droplet size requirements gives the same instruction: wear the required personal protective equipment in accordance with the label. Using a pesticide contrary to the label is a violation of the Pest Control Products Act. Neither page lists PPE items by product.

Licences and exams for sprayers are covered in the guide to US pesticide rules and the guide to Canadian pesticide rules.

Sources