ArbNation Join free

Pole pruner standards: the ISO 11680 family and its European editions

Petrol pole pruners are covered by the ISO 11680 family, adopted in Europe as EN ISO 11680. The 2021 Part 1 edition was withdrawn from October 1, 2025, and one document, ISO 11680:2025, took its place.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

The catalogue pages of four national standards bodies print the scope and the edition history of EN ISO 11680. Estonia (EVS), Switzerland (SNV), Norway (Standard Norge) and the British Standards Institution (BSI) each list editions of the standard. The standard texts themselves are sold, and nothing here quotes a clause.

Scope of the current edition

EVS lists EVS-EN ISO 11680:2025, titled Machinery for forestry: Safety requirements and testing for portable pole mounted powered pruners, as valid from October 1, 2025. Its scope statement covers pole-mounted powered pruners with an internal combustion engine, including extendable and telescopic machines. The cutting attachment is a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter, driven through a power transmission shaft.

The scope leaves out two things. It does not address electric shock from contact with overhead electric lines, apart from warnings and instruction manual requirements. Whole-body vibration from back power units is also left out. Brush cutters with a circular saw blade are outside it, and EVS points to ISO 11806-1 and ISO 11806-2 for those. The standard applies to machines made after its publication date.

Edition history

Editions of ISO 11680 as the catalogue pages list them
EditionCoversStatus
BS EN ISO 11680-1:2011 (BSI), published January 31, 2012Part 1: integral combustion engineWithdrawn December 20, 2021
NS-EN ISO 11680-2:2011 (Standard Norge), March 2012Part 2: back-pack power sourceWithdrawn December 10, 2021
SN EN ISO 11680-1:2021 (SNV), December 2021Part 1, scope names extendable and telescopic machinesWithdrawn October 1, 2025
EVS-EN ISO 11680-1:2021 (EVS)Same Part 1 textWithdrawn from October 1, 2025
EVS-EN ISO 11680:2025 (EVS)One document for combustion-engine pole prunersValid from October 1, 2025

The Norwegian page also records the earlier 2008 and 2000 editions of Part 2. The Swiss page records 2009 and 2000 editions of Part 1, the 2000 one in German under the title Forstmaschinen.

Withdrawn editions and the Machinery Directive

EVS ties the standard to Directive 2006/42/EC (Machinery). Its page on the 2021 edition records that a withdrawn standard keeps the presumption of conformity under that directive. The presumption lasts until a corresponding amendment appears in the Official Journal of the European Union. SNV lists the Swiss designation under law 819.14 and names the federal authority SECO.

Where B175.1 fits

In its kickback fact sheet, the Canadian Centre for Occupational Health and Safety names ANSI B175.1-2021 as Outdoor Power Equipment: Internal Combustion Engine-Powered Hand-Held Chain Saws, Safety and Environmental Requirements. That is a chain saw standard.

Kickback and the chain brake have their own page, chain saw kickback and chain brakes. National chain saw standards sit in the guide to chain saw standards by country.

Sources