Psychosocial hazard rules: Australia's WHS Regulations, CSA Z1003 and WorkSafeBC
Australia's federal WHS Regulations define psychosocial hazards in regulations 55A to 55D. Canada's Z1003 standard lists 13 workplace factors, and WorkSafeBC sets out what an employer's bullying procedure must hold.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
| Source | Kind | What it sets out |
|---|---|---|
| Federal WHS Regulations | Regulation, Division 11 | Defines psychosocial hazard and risk, and the duty to manage them |
| SafeWork NSW | Regulator page | 15 common hazard types and the steps for managing them |
| CSA Z1003 | Voluntary standard | 13 workplace psychosocial factors |
| WorkSafeBC | Policy and procedures | Meaning of bullying and harassment, and what an employer's procedures hold |
| CCOHS | Federal agency fact sheet | Where Canadian law reaches bullying |
Australia: the federal WHS Regulations
Division 11 of Part 3.2 of the Work Health and Safety Regulations 2011 is headed "Psychosocial risks". The register carries Compilation No. 28, dated March 25, 2025. Division 11 has four regulations.
- Regulation 55A. A psychosocial hazard arises from or relates to the design or management of work, a work environment, plant at a workplace, or workplace interactions or behaviours. It may cause psychological harm, whether or not it may also cause physical harm.
- Regulation 55B. A psychosocial risk is a risk to the health or safety of a worker or other person arising from a psychosocial hazard.
- Regulation 55C. A person conducting a business or undertaking must manage psychosocial risks in accordance with Part 3.1 and put in place the control measures that regulation 55D requires.
- Regulation 55D. In choosing control measures, the person must have regard to all relevant matters.
Regulation 55D lists those matters. They include the duration, frequency and severity of exposure, and how hazards interact or combine. Others are the design of work including job demands and tasks, and the systems of work including how work is managed, organised and supported. The list continues with the layout and conditions of the workplace and of workers' accommodation, the plant, substances and structures, workplace interactions or behaviours, and the information, training, instruction and supervision given to workers.
Australia: SafeWork NSW
SafeWork NSW defines psychosocial hazards as situations or aspects of work that may cause a stress response and lead to psychological or physical harm. It names four sources: the design or management of work, the work environment, plant and machinery, and workplace interactions or behaviours. A psychosocial risk is any health or safety risk caused by such a hazard.
SafeWork NSW lists 15 common types and calls the list not exhaustive:
- role overload and role underload
- exposure to traumatic events
- role conflict or lack of role clarity
- low job control
- conflict or poor workplace relationships
- poor co-worker, supervisor and manager support
- poor organisational change consultation
- poor procedural justice
- workplace violence
- bullying and harassment
- sexual harassment
- inadequate reward and recognition
- hazardous physical working environments
- remote or isolated work
Under the NSW Work Health and Safety Regulation 2025, a person conducting a business or undertaking must use the hierarchy of controls, and the duty is the same for self-employed people and contractors. Consultation with workers is a duty. Where risks cannot be eliminated, they must be minimised so far as is reasonably practicable. Control measures must be maintained and reviewed. SafeWork NSW says measures must be reviewed and, if needed, changed when a new hazard or risk is identified or a serious injury or incident occurs. The same applies before any workplace change that could create new risks. It also applies when a control is not used correctly or no longer works, when a health and safety representative requests it, or when consultation with workers shows a review is needed.
Canada: CSA Z1003
The Canadian Centre for Occupational Health and Safety (CCOHS) describes the CSA standard Z1003-13, "Psychological health and safety in the workplace - Prevention, promotion, and guidance to staged implementation", and prints its edition as Z1003-13 (R2022). The standard is available free from the CSA Group website. CCOHS says Z1003 uses the same psychosocial risk factors as the Guarding Minds at Work tools, which researchers at Simon Fraser University identified from research and from Canadian case law and legislation.
The 13 factors are:
- Balance
- Civility and Respect
- Clear Leadership and Expectations
- Engagement
- Growth and Development
- Involvement and Influence
- Organizational Culture
- Protection of Physical Safety
- Psychological Competencies and Demands
- Psychological Protection
- Psychological and Social Support
- Recognition and Reward
- Workload Management
Canada: WorkSafeBC bullying and harassment
WorkSafeBC says a worker is bullied and harassed when someone acts in a way they knew or reasonably ought to have known would humiliate or intimidate that worker. Reasonable action by an employer or supervisor to manage and direct workers is not bullying and harassment (OHS policy P2-21-2). The examples include verbal aggression or insults, derogatory names, harmful hazing or initiation practices, vandalizing personal belongings and spreading malicious rumours.
For workers, the policy is that anyone who witnesses or experiences bullying must report it to the employer. If the employer has not taken reasonable steps, the next stage is the Prevention Information Line, where an officer discusses the incident. If the matter is still unresolved after reporting to the employer and speaking with a prevention officer, a worker may submit a Bullying and Harassment Questionnaire.
For employers, procedures must give a reasonable response to a report and work to prevent a repeat. They must set out:
- how and when investigations are conducted
- what an investigation includes
- the roles and responsibilities of employers, supervisors, workers and others such as investigators, witnesses or union representatives
- follow-up, including corrective actions, time frames and dealing with adverse symptoms
- how investigations are documented and how records are kept
Employers should keep investigation records and submit them to WorkSafeBC only when an officer requests them. The employer is responsible both for setting up the procedures and for seeing that they are followed. Workers must cooperate with investigators and give details of acts they experienced or witnessed.
Canada: where the law reaches bullying
CCOHS explains that occupational health and safety laws in Canada include due diligence, which means taking all reasonable precautions in the circumstances. Harassment and violence definitions often include bullying outright, and are implied where they do not. Prince Edward Island defines harassment in its Workplace Harassment Regulations to include bullying. Where no law addresses bullying by name, the general duty clause to provide a safe and healthy workplace applies, and CCOHS says the risks it covers include psychological harm. Federal, provincial and territorial human rights laws prohibit harassment on listed grounds, and CCOHS says they may apply to bullying in some situations.
Contains information from SafeWork NSW, licensed under Creative Commons Attribution 4.0.
Sources
- Federal Register of Legislation, Work Health and Safety Regulations 2011, Compilation No. 28 (compilation date March 25, 2025), Division 11, read October 16, 2026
- SafeWork NSW, Psychosocial hazards, read October 16, 2026
- CCOHS, Mental Health - Psychosocial Risk Factors in the Workplace (OSH Answers, revised September 18, 2023), read October 16, 2026
- WorkSafeBC, Bullying and harassment, read October 16, 2026
- CCOHS, Bullying in the Workplace (OSH Answers), read October 16, 2026