ArbNation Join free

PPE Regulation 2016/425 in the UK: risk categories, approved bodies, UKCA and CE marks

Regulation (EU) 2016/425 puts falls from a height, hand-held chainsaw cuts and harmful noise in PPE category III. Category III gear carries an approved body's number after the UK marking, and Great Britain accepts UKCA or CE marks.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The text of Regulation (EU) 2016/425 below is the version legislation.gov.uk publishes for the United Kingdom, as amended by the UK.

The Regulation and its enforcement rules

Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 is the Regulation on personal protective equipment, and it repeals Council Directive 89/686/EEC. Its chapters cover the obligations of economic operators, conformity of PPE, conformity assessment, approval of conformity assessment bodies, and market surveillance.

The Personal Protective Equipment (Enforcement) Regulations 2018, SI 2018/390, were made on 20 March 2018 and came into force on 21 April 2018. They make the market surveillance authority enforce Regulation 2016/425. For PPE meant for use by people at work in Great Britain, that authority is the Health and Safety Executive. For PPE for private use it is the weights and measures authority for the area.

The Secretary of State may also enforce the Regulation. In Scotland only the Lord Advocate may start proceedings for an offence. Part 2 of the SI also covers offences, penalties and the defence of due diligence.

PPE categories I, II and III

Article 18 is headed Risk categories of PPE, and Annex I defines three categories.

CategoryAnnex I wording
IMinimal risks only: superficial mechanical injury, contact with weak cleaning materials or prolonged contact with water, contact with hot surfaces not above 50 degrees C, sun damage to the eyes, and atmospheric conditions that are not extreme.
IIRisks other than those listed in categories I and III.
IIIOnly risks that may cause very serious consequences such as death or irreversible damage to health. The list includes falling from a height, electric shock and live working, cuts by hand-held chainsaws, and harmful noise.

Approved bodies and the marks

Under Article 17, the UK marking goes on the PPE visibly, legibly and indelibly, or on the packaging and documents when that is not possible. It goes on before the PPE is placed on the market. For category III PPE, the marking is followed by the identification number of the approved body involved in the Annex VII or VIII procedure. A pictogram showing the risk may follow.

The government guidance on UKCA and CE marked products, first published March 31, 2026 and updated August 21, 2026, applies to England, Scotland and Wales. It says the UK keeps recognising the CE marking, alongside or in place of the UKCA marking, for the Great Britain market under the Product Safety and Metrology (Amendment) Regulations 2024.

The guidance names Category I PPE as the PPE class a manufacturer can self-declare. For third-party assessment, UK Approved Bodies are accredited by UKAS and certify products for UKCA marking only. EU Notified Bodies certify against EU requirements, which can also serve the Great Britain market under CE recognition or Fast-Track UKCA.

The guidance sets the marking at least 5 mm high unless the legislation sets another size. Until 11pm on 31 December 2027, the UKCA marking may go on a label affixed to the product or on an accompanying document. The guidance does not mention category III PPE by name.

Related pages are the PPE standards matrix and the guide to markings on new climbing gear.

Sources